Search Results
For Shaft Diameter For Shaft Diameter |
|---|
For Load Direction For Load Direction |
|---|
 | Thrust |
 | Combined Radial and Thrust |
OD OD |
|---|
ID ID |
|---|
|
Thickness Thickness |
|---|
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
|
Mounted Bearing Type Mounted Bearing Type |
|---|
 |  |
| Base Mount | Four-Bolt Flange Mount |
Maximum Speed Maximum Speed |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
Lubrication Lubrication |
|---|
|
Static Thrust Load Capacity Static Thrust Load Capacity |
|---|
|
For Shaft Surface Smoothness (Ra) For Shaft SurfaceSmoothness (Ra) |
|---|
|
Overall Length Overall Length |
|---|
|
|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
About Ball and Roller Bearings
More
Needle-Roller Thrust Bearings
Bearing
Washer
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.
Washers allow you to use the bearing on unhardened and unground surfaces.
For technical drawings and 3-D models, click on a part number.
Bearings with Steel Rollers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thrust Load Cap., lbs. | 0.032" Thick Washers | 0.126" Thick Washers | ||||||||||||
| For Shaft Dia. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microns | Temp. Range, °F | Each | Each | Each | |||
Open | ||||||||||||||
| 1/4" | 11/16" | 5/64" | 1,350 | 3,000 | 20,000 | Required | 16 | 0° to 240° | 0000000 | 00000 | 00000000 | 00000 | 000000 | 00 |
| 5/16" | 3/4" | 5/64" | 1,150 | 2,950 | 24,000 | Required | 0.2 | 0° to 240° | 0000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
| 3/8" | 13/16" | 5/64" | 1,600 | 4,000 | 16,000 | Required | 16 | 0° to 240° | 0000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
| 1/2" | 15/16" | 5/64" | 1,900 | 5,300 | 13,000 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 000000 | 00 |
| 5/8" | 1 1/8" | 5/64" | 2,150 | 6,600 | 11,000 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 000000 | 00 |
| 3/4" | 1 1/4" | 5/64" | 2,400 | 8,000 | 9,500 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 |
| 7/8" | 1 7/16" | 5/64" | 2,900 | 10,500 | 8,000 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 7/8" | 1 11/16" | 5/64" | 4,400 | 18,600 | 7,500 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 1" | 1 9/16" | 5/64" | 3,150 | 12,100 | 7,500 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 5/64" | 3,850 | 16,400 | 6,500 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 5/64" | 4,500 | 20,500 | 6,000 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 5/64" | 4,600 | 21,600 | 5,500 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 |
| 1 1/2" | 2 3/16" | 5/64" | 4,850 | 23,800 | 5,000 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 5/64" | 5,600 | 30,100 | 4,400 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 000000 | 00 |
| 2" | 2 3/4" | 5/64" | 5,800 | 32,600 | 4,000 | Required | 16 | 0° to 240° | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 |
| 2 1/4" | 3" | 5/64" | 5,550 | 32,000 | 5,600 | Required | 0.2 | 0° to 240° | 0000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 2 1/2" | 3 1/4" | 5/64" | 6,200 | 37,500 | 3,300 | Required | 16 | 0° to 240° | 0000000 | 00000 | 00000000 | 0000 | 000000 | 00 |
| 3" | 3 3/4" | 5/64" | 6,600 | 42,500 | 2,800 | Required | 16 | 0° to 240° | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Bearings with Steel Rollers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thrust Load Cap., lbs. | 1 mm Thick Washers | Additional Washers | |||||||||||||||
| For Shaft Dia., mm | OD, mm | Thick., mm | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microns | Temp. Range, °F | Specifications Met | Each | Thick., mm | Each | Thick., mm | Each | |||
Open | |||||||||||||||||
| 4 | 14 | 2 | 1,000 | 1,800 | 21,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 | 1 | 00000000 | 00000 | __ | 000000 | 00 |
| 5 | 15 | 2 | 1,050 | 2,050 | 21,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 0000 | 1 | 00000000 | 0000 | __ | 000000 | 00 |
| 6 | 19 | 2 | 1,500 | 3,500 | 19,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 00000000 | 0000 | 2.75 | 00000000 | 000000 |
| 8 | 21 | 2 | 1,750 | 4,350 | 18,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 0000 | 1 | 00000000 | 0000 | 2.75 | 00000000 | 0000 |
| 10 | 24 | 2 | 2,050 | 5,700 | 17,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 2.75 | 0000000 | 0000 |
| 12 | 26 | 2 | 2,200 | 6,500 | 15,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 2.75 | 0000000 | 0000 |
| 15 | 28 | 2 | 2,550 | 8,050 | 13,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 2.75 | 0000000 | 0000 |
| 17 | 30 | 2 | 2,700 | 8,850 | 12,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 2.75 | 0000000 | 00000 |
| 20 | 35 | 2 | 2,950 | 10,450 | 10,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 2.75 | 0000000 | 00000 |
| 25 | 42 | 2 | 3,300 | 13,000 | 8,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 3 | 0000000 | 00000 |
| 30 | 47 | 2 | 3,650 | 15,700 | 7,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 3 | 0000000 | 00000 |
| 35 | 52 | 2 | 4,000 | 18,200 | 6,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 | 1 | 0000000 | 0000 | 3.5 | 0000000 | 00000 |
| 40 | 60 | 3 | 6,300 | 25,500 | 6,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 | 1 | 00000000 | 0000 | 3.5 | 00000000 | 00000 |
| 45 | 65 | 3 | 6,700 | 28,700 | 5,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 | 1 | 0000000 | 0000 | 4 | 0000000 | 00000 |
| 50 | 70 | 3 | 7,200 | 32,100 | 4,800 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 | 1 | 0000000 | 0000 | 4 | 0000000 | 00000 |
| 55 | 78 | 3 | 8,500 | 41,800 | 4,300 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 | 1 | 0000000 | 0000 | 5 | 0000000 | 00000 |
| 60 | 85 | 3 | 10,000 | 53,000 | 4,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 | 1 | 00000000 | 0000 | 4.75 | 00000000 | 00000 |
| 65 | 90 | 3 | 10,400 | 57,000 | 3,700 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 | 1 | 00000000 | 0000 | 5.25 | 00000000 | 00000 |
| 70 | 95 | 4 | 12,100 | 57,000 | 3,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 | 1 | 00000000 | 0000 | 5.25 | 00000000 | 00000 |
| 75 | 100 | 4 | 12,400 | 60,000 | 3,300 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 | 1 | 00000000 | 00000 | 5.75 | 00000000 | 00000 |
| 80 | 105 | 4 | 12,500 | 63,000 | 3,100 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 | 1 | 00000000 | 00000 | 5.75 | 00000000 | 00000 |
Washers for Needle-Roller Thrust Bearings
Washer
Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | OD | Thick. | Washer Material | Specifications Met | Each | |
| 1/4" | 11/16" | 0.032" | Steel | __ | 00000000 | 00000 |
| 5/16" | 3/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 3/8" | 13/16" | 0.032" | Steel | __ | 00000000 | 0000 |
| 1/2" | 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 5/8" | 1 1/8" | 0.032" | Steel | __ | 0000000 | 0000 |
| 3/4" | 1 1/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 3/4" | 1 1/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.126" | Steel | __ | 0000000 | 00000 |
| 1 1/2" | 2 3/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/2" | 2 3/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.032" | Steel | __ | 0000000 | 0000 |
| 2" | 2 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 2" | 2 3/4" | 0.126" | Steel | __ | 0000000 | 00000 |
| 2 1/4" | 3" | 0.032" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 0.126" | Steel | __ | 00000000 | 0000 |
| 2 1/2" | 3 1/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 3" | 3 3/4" | 0.032" | Steel | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 0.126" | Steel | __ | 00000000 | 00000 |
| 4mm | 14mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 5mm | 15mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 2.75mm | Steel | __ | 00000000 | 00000 |
| 8mm | 21mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 8mm | 21mm | 2.75mm | Steel | __ | 00000000 | 0000 |
| 10mm | 24mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 10mm | 24mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 12mm | 26mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 12mm | 26mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 15mm | 28mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 15mm | 28mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 17mm | 30mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 17mm | 30mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 20mm | 35mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 20mm | 35mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 25mm | 42mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 25mm | 42mm | 3mm | Steel | __ | 0000000 | 00000 |
| 30mm | 47mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 30mm | 47mm | 3mm | Steel | __ | 0000000 | 00000 |
| 35mm | 52mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 35mm | 52mm | 3.5mm | Steel | __ | 0000000 | 00000 |
| 40mm | 60mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 40mm | 60mm | 3.5mm | Steel | __ | 00000000 | 00000 |
| 45mm | 65mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 45mm | 65mm | 4mm | Steel | __ | 0000000 | 00000 |
| 50mm | 70mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 50mm | 70mm | 4mm | Steel | __ | 0000000 | 00000 |
| 55mm | 78mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 55mm | 78mm | 5mm | Steel | __ | 0000000 | 00000 |
| 60mm | 85mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 60mm | 85mm | 4.75mm | Steel | __ | 00000000 | 00000 |
| 65mm | 90mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 65mm | 90mm | 5.25mm | Steel | __ | 00000000 | 00000 |
| 70mm | 95mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 70mm | 95mm | 5.25mm | Steel | __ | 00000000 | 00000 |
| 75mm | 100mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 75mm | 100mm | 5.75mm | Steel | __ | 00000000 | 00000 |
| 80mm | 105mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 80mm | 105mm | 5.75mm | Steel | __ | 00000000 | 00000 |
Tapered-Roller Thrust Bearings
Open
Sealed
Thick, tapered rollers stand up to extremely high thrust loads.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings have better dust resistance than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Open | ||||||||||
| 1 1/4" | 2.198" | 0.625" | Steel | 12,000 | 34,100 | 10 | Required | 0° to 150° | 00000000 | 000000 |
| 1 1/4" | 2.635" | 0.7658" | Steel | 18,300 | 55,500 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 3/8" | 2.323" | 0.656" | Steel | 14,500 | 42,000 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 1/2" | 2.604" | 0.765" | Steel | 20,300 | 58,000 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 5/8" | 2.869" | 0.8438" | Steel | 20,500 | 62,500 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 13/16" | 3.276" | 0.9375" | Steel | 28,400 | 91,250 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 2" | 2.948" | 0.625" | Steel | 13,300 | 28,700 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 2 1/16" | 3.682" | 1.062" | Steel | 37,500 | 115,000 | 10 | Required | 0° to 150° | 00000000 | 00000 |
Sealed | ||||||||||
| 1 1/4" | 2.29" | 0.677" | Steel | 12,000 | 34,100 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 3/8" | 2.398" | 0.656" | Steel | 14,500 | 42,000 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 1/2" | 2.705" | 0.815" | Steel | 20,300 | 58,000 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 5/8" | 2.98" | 0.8438" | Steel | 20,500 | 62,500 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 1 13/16" | 3.455" | 0.99" | Steel | 28,400 | 91,250 | 10 | Required | 0° to 150° | 00000000 | 00000 |
| 2 1/16" | 3.823" | 1.121" | Steel | 37,500 | 115,000 | 10 | Required | 0° to 150° | 00000000 | 00000 |
Combination Ball/Needle-Roller Bearings
A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle rollers support high radial loads. Install anywhere you would use separate bearings for radial and thrust loads.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ball Bearing OD, mm | Ball Bearing Wd., mm | Ring Material | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Open | |||||||||||||||
| 12 | 21 | 23 | 27 | 9 | Steel | 1,650 | 1,900 | 2,170 | 2,490 | 9,000 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 15 | 24 | 23 | 29 | 9 | Steel | 2,150 | 2,800 | 2,230 | 2,740 | 8,500 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 17 | 26 | 25 | 31 | 9 | Steel | 2,550 | 3,600 | 2,420 | 3,250 | 8,500 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 20 | 30 | 30 | 36 | 10 | Steel | 3,300 | 5,300 | 3,190 | 4,420 | 7,000 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 25 | 37 | 30 | 43 | 11 | Steel | 4,250 | 6,700 | 4,050 | 6,670 | 6,300 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 30 | 42 | 30 | 48 | 11 | Steel | 4,550 | 7,750 | 4,200 | 7,550 | 5,600 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 35 | 47 | 30 | 53 | 12 | Steel | 4,950 | 9,150 | 4,500 | 8,450 | 5,300 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 40 | 52 | 32 | 61 | 13 | Steel | 5,350 | 10,600 | 6,045 | 11,240 | 4,500 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 45 | 58 | 32 | 66.5 | 14 | Steel | 5,600 | 11,600 | 6,250 | 12,380 | 4,500 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 50 | 62 | 35 | 71.5 | 14 | Steel | 6,750 | 15,400 | 6,450 | 13,510 | 4,300 | Required | 8 | -20° to 230° | 00000000 | 000000 |
Mounted Roller Bearings with Four-Bolt Flange
The tapered rollers in these bearings support large shafts at high static loads. Seals block out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Dynamic Thrust Load Cap., lbs. | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Tapered-Roller Bearings | |||||||||||||||
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw | |||||||||||||||
| 1 1/4" | 3 3/4" | 3 3/4" | 2 13/16" | 1" | 3/8" | 2 7/8" | 3,800 lbs. | 15,700 | 2,000 | 4,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 0000000 |
| 1 1/2" | 5 3/8" | 5 3/8" | 3 1/2" | 1 3/16" | 1/2" | 4 1/8" | 7,850 lbs. | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 1 3/4" | 5 5/8" | 5 5/8" | 3 5/8" | 1 3/16" | 1/2" | 4 3/8" | 10,300 lbs. | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 2" | 5 5/8" | 5 5/8" | 3 5/8" | 1 3/16" | 1/2" | 4 3/8" | 10,300 lbs. | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 2 1/2" | 6 7/8" | 6 7/8" | 4 3/16" | 1 1/2" | 5/8" | 5 3/8" | 11,600 lbs. | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 3" | 7 3/4" | 7 3/4" | 4 11/16" | 1 5/8" | 3/4" | 6" | 12,300 lbs. | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 3 1/2" | 9 1/4" | 9 1/4" | 5 1/4" | 1 7/8" | 3/4" | 7" | 19,600 lbs. | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 4" | 10 1/4" | 10 1/4" | 6 1/2" | 2 1/8" | 7/8" | 7 3/4" | 26,900 lbs. | 154,000 | 6,900 | 1,500 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 35mm | 4 5/8" | 4 5/8" | 3 1/16" | 1 1/16" | 1/2" | 3 1/2" | 6,100 lbs. | 26,000 | 2,550 | 3,800 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 40mm | 5 3/8" | 5 3/8" | 3 1/2" | 1 3/16" | 1/2" | 4 1/8" | 7,800 lbs. | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 45mm | 5 5/8" | 5 5/8" | 3 5/8" | 1 3/16" | 1/2" | 4 3/8" | 10,300 lbs. | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 50mm | 5 5/8" | 5 5/8" | 3 5/8" | 1 3/16" | 1/2" | 4 3/8" | 10,300 lbs. | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 60mm | 6 7/8" | 6 7/8" | 4 3/16" | 1 1/2" | 5/8" | 5 3/8" | 11,600 lbs. | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 70mm | 7 3/4" | 7 3/4" | 4 11/16" | 1 5/8" | 3/4" | 6" | 12,300 lbs. | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 80mm | 9 1/4" | 9 1/4" | 5 1/4" | 1 7/8" | 3/4" | 7" | 19,600 lbs. | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 90mm | 9 1/4" | 9 1/4" | 5 1/4" | 1 7/8" | 3/4" | 7" | 19,600 lbs. | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 100mm | 10 1/4" | 10 1/4" | 6 1/2" | 2 1/8" | 7/8" | 7 3/4" | 26,900 lbs. | 154,000 | 6,900 | 1,500 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
Mounted Roller Bearings
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Sealed bearings block out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Sealed Tapered-Roller Bearings
Sealed Tapered-Roller Bearing
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Dynamic Thrust Load Cap., lbs. | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw | ||||||||||||||||
| 1 1/4" | 1 1/2" | 3" | 6" | 2 3/4" | 19/32" | 9/16" | 4 25/32" | 3,800 | 15,700 | 2,000 | 4,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 0000000 |
| 1 3/8" | 1 7/8" | 3 3/4" | 7 3/8" | 3" | 3/4" | 5/8" | 5 3/4" | 6,100 | 26,000 | 2,550 | 3,800 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 1 1/2" | 2 1/8" | 4 1/4" | 7 7/8" | 3 3/8" | 3/4" | 5/8" | 6 1/4" | 7,850 | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 1 5/8" | 2 1/8" | 4 1/4" | 7 7/8" | 3 3/8" | 3/4" | 5/8" | 6 1/4" | 7,850 | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 1 3/4" | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 1 7/8" | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 2" | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 2 1/4" | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 2 1/2" | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 2 3/4" | 3 1/8" | 6 1/4" | 12" | 4 1/2" | 1" | 27/32" | 9 1/2" | 12,300 | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 3" | 3 1/8" | 6 1/4" | 12" | 4 1/2" | 1" | 27/32" | 9 1/2" | 12,300 | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 3 1/2" | 3 3/4" | 7 1/2" | 14" | 5" | 1 3/16" | 1" | 11" | 19,600 | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 4" | 4 1/4" | 8 1/2" | 15 1/4" | 6 1/4" | 1 1/8" | 7/8" | 12 1/2" | 26,900 | 154,000 | 6,900 | 1,500 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 35mm | 1 7/8" | 3 3/4" | 7 3/8" | 3" | 3/4" | 5/8" | 5 3/4" | 6,100 | 26,000 | 2,550 | 3,800 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 40mm | 2 1/8" | 4 1/4" | 7 7/8" | 3 3/8" | 3/4" | 5/8" | 6 1/4" | 7,850 | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 45mm | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 50mm | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 55mm | 2 1/2" | 5" | 9 5/8" | 3 3/4" | 7/8" | 3/4" | 7 3/4" | 10,900 | 48,200 | 3,450 | 2,700 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 60mm | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 65mm | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 70mm | 3 1/8" | 6 1/4" | 12" | 4 1/2" | 1" | 27/32" | 9 1/2" | 12,300 | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
| 80mm | 3 3/4" | 7 1/2" | 14" | 5" | 1 3/16" | 1" | 11" | 19,600 | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 90mm | 3 3/4" | 7 1/2" | 14" | 5" | 1 3/16" | 1" | 11" | 19,600 | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
| 100mm | 4 1/4" | 8 1/2" | 15 1/4" | 6 1/4" | 1 1/8" | 7/8" | 12 1/2" | 26,900 | 154,000 | 6,900 | 1,500 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |