McMaster-Carr logo
    Filter by
    System of Measurement
    For Use Outdoors
    Base Plate Material
    Nonmarking
    Counterbore Diameter
    Attribute Image
    Export Control Classification Number (ECCN)
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    763 Products

    Mount Type

    Mount Type

    Threaded-Stud Bumpers

    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 1.
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 2.
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 3.
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 4.

    Style 1

    Style 2

    Style 3

    Style 4

    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 5.
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 6.
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 7.
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 8.

    Style 5

    Style 6

    Style 7

    Style 8

    These bumpers absorb impact to protect equipment, walls, and floors from dents and scuffs. They're found everywhere from access panels to the bases of equipment. The rubber construction also stifles noise and absorbs vibration to prevent wear and tear to your machinery and nearby surfaces. No separate fasteners are needed—just twist them into a threaded hole.
    Style 1
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 1.
    Multipurpose SBR Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Multipurpose SBR Rubber
    6-32
    		1/4"7/16"1/4"Durometer 60AMedium HardBlack-20 to 180SteelYesNo25000000000000
    8-32
    		1/4"5/8"5/16"Durometer 70AHardBlack0 to 220SteelYesNo1000000000000
    8-32
    		3/8"3/4"7/16"Durometer 70AHardBlack-20 to 180SteelYesNo2500000000000
    10-24
    		3/8"1"1/2"Durometer 70AHardBlack-20 to 180SteelYesNo2500000000000
    10-32
    		1/2"1 1/8"1/2"Durometer 70AHardBlack0 to 220SteelYesNo10000000000000
    1/4"-20
    		1/2"1"7/16"Durometer 70AHardBlack0 to 220SteelYesNo10000000000000
    M6
    		1/4"3/4"3/8"Durometer 70AHardBlack0 to 220SteelYesNo1000000000000
    M6
    		1/2"1"7/16"Durometer 70AHardBlack0 to 220SteelYesNo10000000000000
     
    Abrasion-Resistant Polyurethane Rubber
    5/16"-18
    		7/8"1"1"Durometer 40AMedium SoftBlack-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"1"1"Durometer 60AMedium HardBlue-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"1"1"Durometer 75AHardRed-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"1"1"Durometer 80AHardBlack-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"1 1/2"1 1/2"Durometer 40AMedium SoftBlack-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"1 1/2"1 1/2"Durometer 60AMedium HardBlue-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"1 1/2"1 1/2"Durometer 75AHardRed-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"1 1/2"1 1/2"Durometer 80AHardBlack-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"2"2"Durometer 40AMedium SoftBlack-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"2"2"Durometer 60AMedium HardBlue-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"2"2"Durometer 75AHardRed-60 to 200SteelNoYes1000000000000
    5/16"-18
    		7/8"2"2"Durometer 80AHardBlack-60 to 200SteelNoYes1000000000000
    3/8"-16
    		7/8"2"11/16"Durometer 85AHardBlack-60 to 250SteelYesNo100000000000
    3/8"-16
    		7/8"2"11/16"Durometer 85AHardRed-60 to 250SteelYesNo100000000000
    3/8"-16
    		7/8"2"1"Durometer 85AHardBlack-60 to 250SteelYesNo100000000000
    3/8"-16
    		7/8"2"1"Durometer 85AHardRed-60 to 250SteelYesNo100000000000
    3/8"-16
    		7/8"2 1/2"2 1/2"Durometer 40AMedium SoftBlack-60 to 200SteelNoYes1000000000000
    3/8"-16
    		7/8"2 1/2"2 1/2"Durometer 60AMedium HardBlue-60 to 200SteelNoYes1000000000000
    3/8"-16
    		7/8"2 1/2"2 1/2"Durometer 75AHardRed-60 to 200SteelNoYes1000000000000
    3/8"-16
    		7/8"2 1/2"2 1/2"Durometer 80AHardBlack-60 to 200SteelNoYes1000000000000
    3/8"-16
    		1"1 5/8"11/16"Durometer 85AHardBlack-60 to 250SteelYesNo100000000000
    3/8"-16
    		1"1 5/8"11/16"Durometer 85AHardRed-60 to 250SteelYesNo100000000000
    3/8"-16
    		1 1/8"2"3/8"Durometer 85AHardBlack-60 to 250SteelYesNo100000000000
    3/8"-16
    		1 1/8"2"3/8"Durometer 85AHardRed-60 to 250SteelYesNo100000000000
    1/2"-13
    		1 1/4"3"3"Durometer 40AMedium SoftBlack-60 to 200SteelNoYes1000000000000
    1/2"-13
    		1 1/4"3"3"Durometer 60AMedium HardBlue-60 to 200SteelNoYes1000000000000
    1/2"-13
    		1 1/4"3"3"Durometer 75AHardRed-60 to 200SteelNoYes1000000000000
    1/2"-13
    		1 1/4"3"3"Durometer 80AHardBlack-60 to 200SteelNoYes1000000000000
    1/2"-13
    		1 5/16"4"4"Durometer 40AMedium SoftBlack-60 to 200SteelNoYes10000000000000
    1/2"-13
    		1 5/16"4"4"Durometer 60AMedium HardBlue-60 to 200SteelNoYes10000000000000
    1/2"-13
    		1 5/16"4"4"Durometer 75AHardRed-60 to 200SteelNoYes1000000000000
    1/2"-13
    		1 5/16"4"4"Durometer 80AHardBlack-60 to 200SteelNoYes1000000000000
     
    Style 2
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 2.
    Multipurpose SBR Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Counterbore
    Dia.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Multipurpose SBR Rubber
    6-32
    		1/4"1/2"1/4"1/4"Durometer 70AHardBlack-20 to 180SteelYesNo2500000000000
    8-32
    		5/16"3/4"7/16"5/16"Durometer 70AHardBlack-20 to 200SteelYesNo1000000000000
    10-32
    		1/2"7/8"3/8"3/8"Durometer 70AHardBlack-20 to 200SteelYesNo1000000000000
    1/4"-20
    		3/8"1 1/2"3/4"3/4"Durometer 70AHardBlack-20 to 200SteelYesNo10000000000000
     
    Style 3
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 3.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 3.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Abrasion-Resistant Polyurethane Rubber
    3/8"-16
    		7/8"2 15/16"1"Durometer 85AHardBlack-60 to 250SteelYesNo0000000000000
    3/8"-16
    		7/8"2 15/16"1"Durometer 85AHardRed-60 to 250SteelYesNo000000000000
     
    Style 4
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 4.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 4.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Abrasion-Resistant Polyurethane Rubber
    3/8"-16
    		15/16"1 1/2"1 9/16"Durometer 85AHardBlack-60 to 250SteelYesNo000000000000
    3/8"-16
    		15/16"1 1/2"1 9/16"Durometer 85AHardRed-60 to 250SteelYesNo00000000000
     
    Style 5
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 5.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 5.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Abrasion-Resistant Polyurethane Rubber
    3/8"-16
    		13/16"2"2 1/8"Durometer 85AHardBlack-60 to 250SteelYesNo000000000000
    3/8"-16
    		13/16"2"2 1/8"Durometer 85AHardRed-60 to 250SteelYesNo00000000000
     
    Style 6
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 6.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 6.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    Lg.
    Wd.
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Abrasion-Resistant Polyurethane Rubber
    3/8"-16
    		11/16"2 3/8"2"1 3/8"Durometer 85AHardBlack-60 to 250SteelYesNo000000000000
    3/8"-16
    		11/16"2 3/8"2"1 3/8"Durometer 85AHardRed-60 to 250SteelYesNo00000000000
     
    Style 7
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 7.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 7.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    Lg.
    Wd.
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Abrasion-Resistant Polyurethane Rubber
    3/8"-16
    		11/16"1 7/8"1 3/8"7/8"Durometer 85AHardBlack-60 to 250SteelYesNo000000000000
    3/8"-16
    		11/16"1 7/8"1 3/8"7/8"Durometer 85AHardRed-60 to 250SteelYesNo00000000000
     
    Style 8
    Image of Product. Front orientation. Bumpers. Threaded-Stud Bumpers, Style 8.
    Image of Attribute. Front orientation. Contains Annotated. Threaded-Stud Bumpers, Style 8.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    Lg.
    Wd.
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Abrasion-Resistant Polyurethane Rubber
    3/8"-16
    		1"2"2"2"Durometer 85AHardBlack-60 to 250SteelYesNo0000000000000
    3/8"-16
    		1"2"2"2"Durometer 85AHardRed-60 to 250SteelYesNo000000000000
     

    Reinforced Threaded-Stud Bumpers

    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Stud Bumpers, Style 1.
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Stud Bumpers, Style 2.

    Style 1

    Style 2

    With a metal core for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. No separate fasteners are needed—just twist them into a threaded hole.
    Style 1
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Stud Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Reinforced Threaded-Stud Bumpers, Style 1.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Overall
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Core
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Multipurpose Neoprene
    3/8"-16
    		5/8"1 1/4"1 1/4"1 7/8"Durometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    3/8"-16
    		5/8"1 1/4"1 1/4"1 7/8"Durometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    3/8"-16
    		3/4"1 1/2"13/16"1 9/16"Durometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes000000000000
    3/8"-16
    		3/4"1 1/2"13/16"1 9/16"Durometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    3/8"-16
    		1"1 1/4"1 1/4"2 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes000000000000
    3/8"-16
    		1"1 1/4"1 1/4"2 1/4"Durometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    3/8"-16
    		1 1/4"1 1/4"1 1/4"2 1/2"Durometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes000000000000
    3/8"-16
    		1 1/4"1 1/4"1 1/4"2 1/2"Durometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    1/2"-13
    		3/4"1 1/4"1 1/4"2"Durometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes000000000000
    1/2"-13
    		3/4"1 1/4"1 1/4"2"Durometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    5/8"-18
    		1"1 1/4"1 1/4"2 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes000000000000
    5/8"-18
    		1"1 1/4"1 1/4"2 1/4"Durometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    M6 × 1 mm18 mm19 mm16 mm34 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M6 × 1 mm18 mm19 mm16 mm34 mmDurometer 70AHardBlack-40 to 200SteelSteelYesYes000000000000
    M8 × 1.25 mm18 mm19 mm16 mm34 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M8 × 1.25 mm18 mm19 mm16 mm34 mmDurometer 70AHardBlack-40 to 200SteelSteelYesYes000000000000
    M10 × 1.5 mm15 mm32 mm32 mm47 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M10 × 1.5 mm15 mm32 mm32 mm47 mmDurometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    M10 × 1.5 mm30 mm32 mm32 mm62 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M10 × 1.5 mm30 mm32 mm32 mm62 mmDurometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    M12 × 1.75 mm30 mm32 mm32 mm62 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M12 × 1.75 mm30 mm32 mm32 mm62 mmDurometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm15 mm32 mm32 mm47 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm15 mm32 mm32 mm47 mmDurometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm30 mm32 mm32 mm62 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm30 mm32 mm32 mm62 mmDurometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm30 mm45 mm42 mm72 mmDurometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm30 mm45 mm42 mm72 mmDurometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
     
    Abrasion-Resistant Polyurethane Rubber
    1/4"-20
    		3/4"1"1"1 3/4"Durometer 75AHardRed-60 to 200SteelSteelYesYes000000000000
    1/4"-20
    		3/4"1 1/4"1"1 3/4"Durometer 75AHardRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		5/8"1 1/4"1 1/4"1 7/8"Durometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		5/8"1 1/4"1 1/4"1 7/8"Durometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		3/4"1 1/2"13/16"1 9/16"Durometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		3/4"1 1/2"13/16"1 9/16"Durometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		7/8"1 1/2"1 1/4"2"Durometer 75AHardRed-60 to 200SteelSteelYesYes0000000000000
    3/8"-16
    		7/8"2"1 1/4"2"Durometer 75AHardRed-60 to 200SteelSteelYesYes0000000000000
    3/8"-16
    		1"1 1/4"1 1/4"2 1/4"Durometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		1"1 1/4"1 1/4"2 1/4"Durometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		1 1/4"1 1/4"1 1/4"2 1/2"Durometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    3/8"-16
    		1 1/4"1 1/4"1 1/4"2 1/2"Durometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    1/2"-13
    		3/4"1 1/4"1 1/4"2"Durometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    1/2"-13
    		3/4"1 1/4"1 1/4"2"Durometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    1/2"-13
    		1"2 1/2"2"2 3/4"Durometer 75AHardRed-60 to 200SteelSteelYesYes0000000000000
    1/2"-13
    		1"3"2 1/2"3 1/4"Durometer 75AHardRed-60 to 200SteelSteelYesYes0000000000000
    5/8"-18
    		1"1 1/4"1 1/4"2 1/4"Durometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    5/8"-18
    		1"1 1/4"1 1/4"2 1/4"Durometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    M6 × 1 mm18 mm19 mm16 mm34 mmDurometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    M6 × 1 mm18 mm19 mm16 mm34 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    M8 × 1.25 mm18 mm19 mm16 mm34 mmDurometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    M8 × 1.25 mm18 mm19 mm16 mm34 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes000000000000
    M10 × 1.5 mm15 mm32 mm32 mm47 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes0000000000000
    M10 × 1.5 mm30 mm32 mm32 mm62 mmDurometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    M10 × 1.5 mm30 mm32 mm32 mm62 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes0000000000000
    M12 × 1.75 mm30 mm32 mm32 mm62 mmDurometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    M12 × 1.75 mm30 mm32 mm32 mm62 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm15 mm32 mm32 mm47 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm30 mm32 mm32 mm62 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes0000000000000
    M16 × 2 mm30 mm45 mm42 mm72 mmDurometer 80AHardRed-60 to 200SteelSteelYesYes0000000000000
     
    Style 2
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Stud Bumpers, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Reinforced Threaded-Stud Bumpers, Style 2.
    Tighten with a wrench for a more secure hold than bumpers installed by hand.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Overall
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud Drive
    Style
    Hex
    Wd.
    Hex Nut
    Material
    Stud
    Material
    Core
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Multipurpose Neoprene
    10-24
    		1/2"3/4"5/8"1 5/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes0000000000000
    10-24
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes00000000000
    10-24
    		1 1/4"3/4"5/8"2 1/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes000000000000
    10-24
    		1 1/4"3/4"5/8"2 1/16"Durometer 80AHardBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes00000000000
    10-32
    		1/2"3/4"5/8"1 5/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes000000000000
    10-32
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes00000000000
    10-32
    		1 1/4"3/4"5/8"2 1/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes000000000000
    10-32
    		1 1/4"3/4"5/8"2 1/16"Durometer 70AHardBlack-40 to 200Hex
    		3/8"SteelSteelSteelYesYes000000000000
    1/4"-20
    		1/2"3/4"5/8"1 5/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-20
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-20
    		1 1/4"3/4"5/8"2 1/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-20
    		1 1/4"3/4"5/8"2 1/16"Durometer 70AHardBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-28
    		1/2"3/4"5/8"1 5/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-28
    		1/2"3/4"5/8"1 5/16"Durometer 70AHardBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-28
    		1 1/4"3/4"5/8"2 1/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-28
    		1 1/4"3/4"5/8"2 1/16"Durometer 70AHardBlack-40 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    5/16"-18
    		1/2"3/4"5/8"1 5/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-18
    		1/2"3/4"5/8"1 5/16"Durometer 70AHardBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes00000000000
    5/16"-18
    		1 1/4"3/4"5/8"2 1/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-18
    		1 1/4"3/4"5/8"2 1/16"Durometer 70AHardBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes00000000000
    5/16"-24
    		1/2"3/4"5/8"1 5/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-24
    		1/2"3/4"5/8"1 5/16"Durometer 70AHardBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-24
    		1 1/4"3/4"5/8"2 1/16"Durometer 40AMedium SoftBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-24
    		1 1/4"3/4"5/8"2 1/16"Durometer 70AHardBlack-40 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
     
    Abrasion-Resistant Polyurethane Rubber
    10-24
    		1/2"3/4"5/8"1 1/4"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    10-24
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    10-24
    		1 1/4"3/4"5/8"2"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    10-24
    		1 1/4"3/4"5/8"2 1/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    10-32
    		1/2"3/4"5/8"1 1/4"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    10-32
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    10-32
    		1 1/4"3/4"5/8"2"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    10-32
    		1 1/4"3/4"5/8"2 1/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes0000000000000
    1/4"-20
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes0000000000000
    1/4"-20
    		1/2"3/4"5/8"1 3/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-20
    		1 1/4"3/4"5/8"2 1/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes0000000000000
    1/4"-20
    		1 1/4"3/4"5/8"2 1/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-28
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes0000000000000
    1/4"-28
    		1/2"3/4"5/8"1 3/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    1/4"-28
    		1 1/4"3/4"5/8"2 1/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes0000000000000
    1/4"-28
    		1 1/4"3/4"5/8"2 1/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		7/16"SteelSteelSteelYesYes000000000000
    5/16"-18
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-18
    		1/2"3/4"5/8"1 3/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-18
    		1 1/4"3/4"5/8"2 1/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-18
    		1 1/4"3/4"5/8"2 1/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-24
    		1/2"3/4"5/8"1 5/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes0000000000000
    5/16"-24
    		1/2"3/4"5/8"1 3/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
    5/16"-24
    		1 1/4"3/4"5/8"2 1/16"Durometer 80AHardRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes0000000000000
    5/16"-24
    		1 1/4"3/4"5/8"2 1/8"Durometer 40AMedium SoftRed-60 to 200Hex
    		1/2"SteelSteelSteelYesYes000000000000
     

    Load-Rated Reinforced Threaded-Stud Bumpers

    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 1.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 2.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 3.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 4.

    Style 1

    Style 2

    Style 3

    Style 4

    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 5.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 6.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 7.

    Style 5

    Style 6

    Style 7

    These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 5,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. No separate fasteners are needed—just twist them into a threaded hole.
    Style 1
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 1.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    High-Temperature Silicone Rubber—Keep their shape and strength at higher temperatures than any of our other rubber bumpers.
    Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Rubber Blend—A good choice for outdoor use, these withstand sunlight, rain, and ozone better than Buna-N bumpers.
    Stainless Steel Stud—Unlike bumpers with steel studs, these handle repeated washdowns without corroding.
    Steel Stud—Durable and economical, these are the choice for most jobs.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Rubber Blend with Steel Stud and Base Plate
    4-40
    		7/32"9/32"5/16"0.5Durometer 19ASoftBlack-10 to 150YesYes0000000000000
    6-32
    		3/8"13/32"1/2"1Durometer 19ASoftBlack-10 to 150YesYes000000000000
    8-32
    		3/8"13/32"1/2"1Durometer 19ASoftBlack-10 to 150YesYes000000000000
     
    Natural Rubber with Steel Stud and Base Plate
    1/4"-20
    		1/2"1"1/2"210Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    1/4"-20
    		1/2"1"3/4"140Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    5/16"-18
    		5/8"1"1"150Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    5/16"-18
    		5/8"1 1/2"3/4"390Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    5/16"-18
    		5/8"1 9/16"1"430Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    3/8"-16
    		5/8"1 9/16"1"430Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    3/8"-16
    		5/8"2"1 5/8"640Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    3/8"-16
    		1 1/8"2"3/4"830Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M3 × 0.5 mm6 mm8 mm8 mm8Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M3 × 0.5 mm6 mm8 mm8 mm30Durometer 70AHardBlack-40 to 170NoNo000000000000
    M3 × 0.5 mm6 mm8 mm13 mm11Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M3 × 0.5 mm6 mm8 mm13 mm30Durometer 70AHardBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm10 mm20Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm10 mm45Durometer 70AHardBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm15 mm21Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm15 mm35Durometer 70AHardBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm20 mm21Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm20 mm35Durometer 70AHardBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm15 mm10 mm35Durometer 55AMediumBlack-40 to 170NoNo00000000000
    M4 × 0.7 mm10 mm15 mm10 mm90Durometer 70AHardBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm15 mm15 mm50Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M4 × 0.7 mm10 mm15 mm15 mm80Durometer 70AHardBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm15 mm20 mm60Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M4 × 0.7 mm10 mm15 mm20 mm130Durometer 70AHardBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm15 mm30 mm50Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm15 mm30 mm80Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm10 mm140Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm10 mm210Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm15 mm100Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm15 mm150Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm20 mm80Durometer 55AMediumBlack-40 to 170NoNo00000000000
    M6 × 1 mm18 mm20 mm20 mm180Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm30 mm90Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm30 mm190Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm25 mm15 mm130Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M6 × 1 mm18 mm25 mm15 mm360Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm25 mm20 mm120Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M6 × 1 mm18 mm25 mm20 mm310Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm25 mm30 mm110Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M6 × 1 mm18 mm25 mm30 mm260Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm15 mm220Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm15 mm580Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm20 mm220Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm20 mm420Durometer 70AHardBlack-40 to 170NoNo00000000000
    M8 × 1.25 mm20 mm30 mm25 mm230Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm25 mm350Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm30 mm170Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm30 mm360Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm23 mm40 mm20 mm270Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M8 × 1.25 mm23 mm40 mm20 mm1,060Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm23 mm40 mm25 mm370Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm23 mm40 mm25 mm920Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm23 mm40 mm30 mm350Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M8 × 1.25 mm23 mm40 mm30 mm630Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm23 mm40 mm40 mm400Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M8 × 1.25 mm23 mm40 mm40 mm700Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm27 mm70 mm30 mm1,610Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm27 mm70 mm30 mm2,930Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm27 mm70 mm40 mm920Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm27 mm70 mm55 mm1,010Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm28 mm50 mm20 mm580Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm28 mm50 mm20 mm1,670Durometer 70AHardBlack-40 to 170NoNo000000000000
    M10 × 1.5 mm28 mm50 mm30 mm550Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm28 mm50 mm30 mm1,210Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm50 mm40 mm550Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm28 mm50 mm40 mm1,110Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm50 mm50 mm600Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm50 mm50 mm940Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm60 mm20 mm860Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm60 mm40 mm790Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm60 mm60 mm1,820Durometer 70AHardBlack-40 to 170NoNo000000000000
    M12 × 1.75 mm37 mm75 mm25 mm2,170Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm37 mm75 mm25 mm4,670Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm37 mm75 mm40 mm1,500Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm37 mm75 mm40 mm2,060Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm37 mm75 mm50 mm980Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M12 × 1.75 mm37 mm75 mm50 mm3,040Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M16 × 2 mm41 mm100 mm40 mm1,820Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M16 × 2 mm41 mm100 mm60 mm1,750Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M16 × 2 mm41 mm125 mm75 mm5,340Durometer 70AHardBlack-40 to 170NoNo00000000000000
     
    Natural Rubber with Corrosion-Resistant Stainless Steel Stud and Base Plate
    1/4"-20
    		1/2"1"1/2"210Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    1/4"-20
    		1/2"1"3/4"140Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    5/16"-18
    		5/8"1"1"150Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    5/16"-18
    		5/8"1 1/2"3/4"390Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    5/16"-18
    		5/8"1 9/16"1"430Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    3/8"-16
    		5/8"1 9/16"1"430Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    3/8"-16
    		5/8"2"1 5/8"640Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    3/8"-16
    		1 1/8"2"3/4"830Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M3 × 0.5 mm6 mm8 mm8 mm8Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M3 × 0.5 mm6 mm8 mm13 mm11Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm10 mm20Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm10 mm15 mm21Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm15 mm10 mm35Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M4 × 0.7 mm10 mm15 mm15 mm50Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M4 × 0.7 mm10 mm15 mm20 mm60Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M4 × 0.7 mm10 mm15 mm30 mm50Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm10 mm140Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm15 mm100Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm20 mm80Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm30 mm90Durometer 55AMediumBlack-40 to 170NoNo00000000000
    M6 × 1 mm18 mm25 mm15 mm130Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M6 × 1 mm18 mm25 mm20 mm120Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M6 × 1 mm18 mm25 mm30 mm110Durometer 50AMediumBlack-10 to 150NoNo0000000000000
    M8 × 1.25 mm20 mm30 mm15 mm220Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm20 mm220Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M8 × 1.25 mm20 mm30 mm25 mm230Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M8 × 1.25 mm20 mm30 mm30 mm170Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M8 × 1.25 mm23 mm40 mm20 mm270Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M8 × 1.25 mm23 mm40 mm25 mm370Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M8 × 1.25 mm23 mm40 mm30 mm350Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M8 × 1.25 mm23 mm40 mm40 mm400Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm27 mm70 mm30 mm1,610Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M10 × 1.5 mm28 mm50 mm20 mm580Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm28 mm50 mm30 mm550Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm28 mm50 mm40 mm550Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M10 × 1.5 mm28 mm50 mm50 mm600Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm60 mm20 mm780Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm37 mm75 mm25 mm2,170Durometer 55AMediumBlack-40 to 170NoNo0000000000000
     
    Abrasion-Resistant Polyurethane Rubber with Steel Stud and Base Plate
    4-40
    		7/32"9/32"5/16"4Durometer 48AMediumBlack60 to 160NoNo000000000000
    6-32
    		3/8"13/32"1/2"8Durometer 48AMediumBlack60 to 160NoNo000000000000
    8-32
    		3/8"13/32"1/2"8Durometer 48AMediumBlack60 to 160NoNo000000000000
    8-32
    		1/2"3/4"1/2"3Durometer 50 OOExtra SoftBlack-20 to 160NoNo00000000000
    8-32
    		1/2"3/4"1/2"12Durometer 70 OOSoftBlack-20 to 160NoNo00000000000
    1/4"-20
    		1/2"5/8"5/8"20Durometer 48AMediumBlack60 to 160NoNo000000000000
    1/4"-20
    		1/2"1 1/2"1"11Durometer 50 OOExtra SoftBlack-20 to 160NoNo000000000000
    1/4"-20
    		1/2"1 1/2"1"48Durometer 70 OOSoftBlack-20 to 160NoNo000000000000
    1/4"-20
    		1/2"1 3/4"27/32"20Durometer 50 OOExtra SoftBlack-20 to 160NoNo000000000000
    1/4"-20
    		1/2"1 3/4"27/32"72Durometer 70 OOSoftBlack-20 to 160NoNo000000000000
    5/16"-18
    		5/8"1"3/4"50Durometer 48AMediumBlack60 to 160NoNo000000000000
     
    High-Temperature Silicone Rubber with Steel Stud and Base Plate
    1/4"-20
    		1/2"1"3/4"25Durometer 30ASoftBlack-80 to 300YesYes00000000000
    1/4"-20
    		1/2"1"3/4"35Durometer 40AMedium SoftGreen-80 to 300YesYes00000000000
    1/4"-20
    		1/2"1"3/4"50Durometer 50AMediumOrange-80 to 300YesYes00000000000
    1/4"-20
    		1/2"1"3/4"65Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    1/4"-20
    		1/2"1"3/4"90Durometer 70AHardOrange-80 to 300YesYes00000000000
    5/16"-18
    		5/8"1 1/2"1"60Durometer 30ASoftBlack-80 to 300YesYes00000000000
    5/16"-18
    		5/8"1 1/2"1"90Durometer 40AMedium SoftGreen-80 to 300YesYes00000000000
    5/16"-18
    		5/8"1 1/2"1"120Durometer 50AMediumOrange-80 to 300YesYes00000000000
    5/16"-18
    		5/8"1 1/2"1"170Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    5/16"-18
    		5/8"1 1/2"1"220Durometer 70AHardOrange-80 to 300YesYes00000000000
    M6 × 1 mm13 mm25 mm19 mm25Durometer 30ASoftBlack-80 to 300YesYes00000000000
    M6 × 1 mm13 mm25 mm19 mm35Durometer 40AMedium SoftGreen-80 to 300YesYes00000000000
    M6 × 1 mm13 mm25 mm19 mm50Durometer 50AMediumOrange-80 to 300YesYes00000000000
    M6 × 1 mm13 mm25 mm19 mm65Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    M6 × 1 mm13 mm25 mm19 mm90Durometer 70AHardOrange-80 to 300YesYes00000000000
    M8 × 1.25 mm16 mm38 mm25 mm60Durometer 30ASoftBlack-80 to 300YesYes00000000000
    M8 × 1.25 mm16 mm38 mm25 mm90Durometer 40AMedium SoftGreen-80 to 300YesYes00000000000
    M8 × 1.25 mm16 mm38 mm25 mm120Durometer 50AMediumOrange-80 to 300YesYes00000000000
    M8 × 1.25 mm16 mm38 mm25 mm170Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    M8 × 1.25 mm16 mm38 mm25 mm220Durometer 70AHardOrange-80 to 300YesYes00000000000
     
    Style 2
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 2.
    Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Stainless Steel Stud—Unlike bumpers with steel studs, these handle repeated washdowns without corroding.
    Steel Stud—Durable and economical, these are the choice for most jobs.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Natural Rubber with Steel Stud and Base Plate
    1/4"-20
    		1/2"3/4"1"22Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    1/4"-20
    		1/2"63/64"1 1/4"30Durometer 55AMediumBlack-40 to 170NoNo000000000000
    5/16"-18
    		5/8"1 17/64"1 1/2"45Durometer 55AMediumBlack-40 to 170NoNo000000000000
    5/16"-18
    		5/8"1 1/2"1 3/4"140Durometer 55AMediumBlack-40 to 170NoNo000000000000
    3/8"-16
    		5/8"1 49/64"2"160Durometer 55AMediumBlack-40 to 170NoNo000000000000
    3/8"-16
    		1 1/8"2"2 1/4"190Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M5 × 0.8 mm12 mm10 mm10 mm13Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M5 × 0.8 mm12 mm10 mm10 mm25Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm15 mm40Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm15 mm70Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm24 mm22Durometer 50AMediumBlack-10 to 150NoNo00000000000
    M6 × 1 mm18 mm20 mm24 mm70Durometer 70AHardBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm25 mm20 mm40Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm25 mm20 mm110Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm18 mm30 mm30 mm30Durometer 50AMediumBlack-10 to 150NoNo00000000000
    M8 × 1.25 mm18 mm30 mm30 mm140Durometer 70AHardBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm36 mm70Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm20 mm30 mm36 mm140Durometer 70AHardBlack-40 to 170NoNo00000000000
    M8 × 1.25 mm23 mm35 mm40 mm60Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm28 mm50 mm61 mm160Durometer 50AMediumBlack-10 to 150NoNo000000000000
    M8 × 1.25 mm28 mm50 mm61 mm340Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm50 mm50 mm210Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm50 mm50 mm250Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M10 × 1.5 mm28 mm50 mm68 mm190Durometer 50AMediumBlack-10 to 150NoNo000000000000
    M10 × 1.5 mm28 mm50 mm68 mm430Durometer 70AHardBlack-40 to 170NoNo0000000000000
     
    Natural Rubber with Corrosion-Resistant Stainless Steel Stud and Base Plate
    1/4"-20
    		1/2"3/4"1"22Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    5/16"-18
    		5/8"1 1/2"1 3/4"140Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M5 × 0.8 mm12 mm10 mm10 mm13Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm15 mm40Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M6 × 1 mm18 mm20 mm24 mm25Durometer 55AMediumBlack-40 to 170NoNo000000000000
    M8 × 1.25 mm18 mm30 mm30 mm50Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M8 × 1.25 mm20 mm30 mm36 mm70Durometer 55AMediumBlack-40 to 170NoNo0000000000000
     
    Style 3
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 3.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 3.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Multipurpose Neoprene with Steel Stud and Base Plate
    1/4"-20
    		1/2"1"1/2"25Durometer 50AMediumBlack-10 to 150NoYes40000000000000
     
    Style 4
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 4.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 4.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Multipurpose Neoprene with Steel Stud and Base Plate
    1/4"-20
    		1/2"1"5/8"18Durometer 50AMediumBlack-10 to 150NoYes40000000000000
     
    Style 5
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 5.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 5.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Multipurpose Neoprene with Steel Stud and Base Plate
    5/16"-18
    		5/8"1 5/8"2"60Durometer 50AMediumBlack-10 to 150NoYes40000000000000
     
    Style 6
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 6.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 6.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Multipurpose Neoprene with Steel Stud and Base Plate
    5/16"-18
    		5/8"1 5/8"1"80Durometer 50AMediumBlack-10 to 150NoYes40000000000000
    5/16"-18
    		5/8"1 5/8"1 1/2"70Durometer 50AMediumBlack-10 to 150NoYes4000000000000
     
    Style 7
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 7.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 7.
    Oil-Resistant Buna-N—These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
    Stainless Steel Stud—Unlike bumpers with steel studs, these handle repeated washdowns without corroding.
    Steel Stud—Durable and economical, these are the choice for most jobs.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Oil-Resistant Buna-N with Steel Stud and Base Plate
    10-24
    		1/4"3/4"5/8"25Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    10-24
    		3/8"3/4"5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    10-24
    		3/4"3/4"5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    1/4"-20
    		5/16"63/64"13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    1/4"-20
    		1/2"63/64"13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    1/4"-20
    		1"63/64"13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		3/8"1 17/64"1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		3/8"1 1/2"1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		9/16"1 17/64"1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		5/8"1 17/64"1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		5/8"1 1/2"1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		7/8"1 17/64"1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo00000000000
    5/16"-18
    		7/8"1 1/2"1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		1 1/4"1 17/64"1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		1 1/4"1 1/2"1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo000000000000
    3/8"-16
    		5/8"1 31/32"1 11/16"360Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    3/8"-16
    		3/4"1 31/32"1 11/16"360Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    3/8"-16
    		1 1/4"1 31/32"1 11/16"360Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M5 × 0.8 mm6 mm19 mm5/8"25Durometer 55AMediumBlack-20 to 170NoNo00000000000
    M5 × 0.8 mm10 mm19 mm5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M5 × 0.8 mm20 mm19 mm5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M6 × 1 mm8 mm25 mm13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M6 × 1 mm12 mm25 mm13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M6 × 1 mm25 mm25 mm13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M8 × 1.25 mm10 mm32 mm1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M8 × 1.25 mm10 mm38 mm1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M8 × 1.25 mm16 mm32 mm1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M8 × 1.25 mm16 mm38 mm1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M8 × 1.25 mm30 mm32 mm1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M8 × 1.25 mm30 mm38 mm1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M10 × 1.5 mm40 mm50 mm1 11/16"360Durometer 55AMediumBlack-20 to 170NoNo0000000000000
     
    Oil-Resistant Buna-N with Corrosion-Resistant Stainless Steel Stud and Base Plate
    10-24
    		3/8"3/4"5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    10-24
    		3/4"3/4"5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    1/4"-20
    		1/2"63/64"13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    1/4"-20
    		1"63/64"13/16"90Durometer 55AMediumBlack-20 to 170NoNo000000000000
    5/16"-18
    		5/8"1 17/64"1 1/64"200Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    5/16"-18
    		1 1/4"1 1/2"1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    3/8"-16
    		1 1/4"1 31/32"1 11/16"360Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M5 × 0.8 mm6 mm19 mm5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M5 × 0.8 mm10 mm19 mm5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M5 × 0.8 mm20 mm19 mm5/8"25Durometer 55AMediumBlack-20 to 170NoNo000000000000
    M6 × 1 mm8 mm25 mm13/16"90Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M6 × 1 mm12 mm25 mm13/16"90Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M6 × 1 mm25 mm25 mm13/16"90Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M8 × 1.25 mm30 mm38 mm1 17/64"270Durometer 55AMediumBlack-20 to 170NoNo0000000000000
    M10 × 1.5 mm40 mm50 mm1 11/16"360Durometer 55AMediumBlack-20 to 170NoNo0000000000000
     

    Reinforced Threaded-Hole Bumpers

    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 2.

    Style 1

    Style 2

    With a metal core or base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
    Style 1
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Reinforced Threaded-Hole Bumpers, Style 1.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Oil-Resistant Buna-N—These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Core
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Multipurpose Neoprene
    10-24
    		1/4"3/4"5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    10-24
    		1/4"3/4"5/8"Durometer 70AHardBlack-40 to 200SteelNoYes000000000000
    10-32
    		1/4"3/4"5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    10-32
    		1/4"3/4"5/8"Durometer 70AHardBlack-40 to 200SteelNoYes00000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 70AHardBlack-40 to 200SteelNoYes00000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 70AHardBlack-40 to 200SteelNoYes00000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 70AHardBlack-40 to 200SteelNoYes00000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 70AHardBlack-40 to 200SteelNoYes00000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    5/8"-18
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    5/8"-18
    		1/2"1 1/4"1 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    5/8"-18
    		5/8"1 3/4"1 5/8"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    5/8"-18
    		5/8"1 3/4"1 5/8"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    3/4"-16
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    3/4"-16
    		1"2 1/4"2 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    1"-8
    		1 1/4"3"2 3/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    1"-8
    		1 1/4"3"2 3/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    1 1/4"-12
    		1 1/4"3"2 3/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    1 1/4"-12
    		1 1/4"3"2 3/4"Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 70AHardBlack-40 to 200SteelNoYes000000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes000000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 70AHardBlack-40 to 200SteelNoYes000000000000
    M10 × 1.25 mm13 mm32 mm32 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    M10 × 1.25 mm13 mm32 mm32 mmDurometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    M10 × 1.5 mm13 mm32 mm32 mmDurometer 70AHardBlack-40 to 200SteelNoYes0000000000000
    M12 × 1.25 mm13 mm32 mm32 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    M12 × 1.25 mm13 mm32 mm32 mmDurometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    M12 × 1.75 mm13 mm32 mm32 mmDurometer 70AHardBlack-40 to 200SteelNoYes0000000000000
    M16 × 2 mm13 mm32 mm32 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    M16 × 2 mm13 mm32 mm32 mmDurometer 70AHardBlack-40 to 200SteelNoYes0000000000000
    M16 × 2 mm16 mm45 mm42 mmDurometer 70AHardBlack-40 to 200SteelNoYes0000000000000
     
    Abrasion-Resistant Polyurethane Rubber
    10-24
    		1/4"3/4"5/8"Durometer 30ASoftRed-40 to 200SteelNoYes000000000000
    10-24
    		1/4"3/4"5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes0000000000
    10-24
    		1/4"3/4"5/8"Durometer 50AMediumRed-40 to 200SteelNoYes000000000000
    10-24
    		1/4"3/4"5/8"Durometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    10-24
    		1/4"3/4"5/8"Durometer 85AHardRed-40 to 200SteelNoYes00000000000
    10-24
    		1/4"3/4"5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    10-32
    		1/4"3/4"5/8"Durometer 30ASoftRed-40 to 200SteelNoYes000000000000
    10-32
    		1/4"3/4"5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes0000000000
    10-32
    		1/4"3/4"5/8"Durometer 50AMediumRed-40 to 200SteelNoYes000000000000
    10-32
    		1/4"3/4"5/8"Durometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    10-32
    		1/4"3/4"5/8"Durometer 85AHardRed-40 to 200SteelNoYes00000000000
    10-32
    		1/4"3/4"5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 30ASoftRed-40 to 200SteelNoYes000000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes0000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 50AMediumRed-40 to 200SteelNoYes000000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 85AHardRed-40 to 200SteelNoYes00000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    1/4"-20
    		3/4"1"1"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    1/4"-20
    		3/4"1 1/4"1"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 30ASoftRed-40 to 200SteelNoYes000000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes0000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 50AMediumRed-40 to 200SteelNoYes000000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 85AHardRed-40 to 200SteelNoYes00000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 30ASoftRed-40 to 200SteelNoYes000000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes0000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 50AMediumRed-40 to 200SteelNoYes000000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 85AHardRed-40 to 200SteelNoYes00000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 30ASoftRed-40 to 200SteelNoYes000000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes0000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 50AMediumRed-40 to 200SteelNoYes000000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 85AHardRed-40 to 200SteelNoYes00000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 30ASoftRed-40 to 200SteelNoYes0000000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes00000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 30ASoftRed-40 to 200SteelNoYes0000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes00000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 30ASoftRed-40 to 200SteelNoYes0000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes00000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 30ASoftRed-40 to 200SteelNoYes0000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    5/8"-18
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    5/8"-18
    		1/2"1 1/4"1 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    5/8"-18
    		1/2"1 1/4"1 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    5/8"-18
    		5/8"1 3/4"1 5/8"Durometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    5/8"-18
    		5/8"1 3/4"1 5/8"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    5/8"-18
    		5/8"1 3/4"1 5/8"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    3/4"-16
    		1"2 1/4"2 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    3/4"-16
    		1"2 1/4"2 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes0000000000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    1"-8
    		1 1/4"3"2 3/4"Durometer 60AMedium HardRed-40 to 200SteelNoYes0000000000000
    1"-8
    		1 1/4"3"2 3/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    1"-8
    		1 1/4"3"2 3/4"Durometer 90AExtra HardRed-40 to 200SteelNoYes0000000000000
    1 1/4"-12
    		1 1/4"3"2 3/4"Durometer 85AHardRed-40 to 200SteelNoYes000000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 30ASoftRed-40 to 200SteelNoYes000000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 40AMedium SoftRed-40 to 200SteelNoYes00000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 50AMediumRed-40 to 200SteelNoYes000000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 85AHardRed-40 to 200SteelNoYes000000000000
    M6 × 1 mm6 mm19 mm16 mmDurometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 30ASoftRed-40 to 200SteelNoYes000000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 40AMedium SoftRed-40 to 200SteelNoYes00000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 50AMediumRed-40 to 200SteelNoYes000000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 60AMedium HardBlack-40 to 200SteelNoYes000000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 85AHardRed-40 to 200SteelNoYes000000000000
    M8 × 1.25 mm6 mm19 mm16 mmDurometer 95AExtra HardBlack-40 to 200SteelNoYes000000000000
    M10 × 1.25 mm13 mm32 mm32 mmDurometer 30ASoftRed-40 to 200SteelNoYes0000000000000
    M10 × 1.25 mm13 mm32 mm32 mmDurometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    M10 × 1.25 mm13 mm32 mm32 mmDurometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    M10 × 1.25 mm13 mm32 mm32 mmDurometer 60AMedium HardRed-40 to 200SteelNoYes0000000000000
    M10 × 1.25 mm13 mm32 mm32 mmDurometer 85AHardRed-40 to 200SteelNoYes0000000000000
    M10 × 1.5 mm13 mm32 mm32 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    M10 × 1.5 mm13 mm32 mm32 mmDurometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    M12 × 1.25 mm13 mm32 mm32 mmDurometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    M12 × 1.25 mm13 mm32 mm32 mmDurometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    M12 × 1.25 mm13 mm32 mm32 mmDurometer 60AMedium HardRed-40 to 200SteelNoYes0000000000000
    M12 × 1.25 mm13 mm32 mm32 mmDurometer 85AHardRed-40 to 200SteelNoYes0000000000000
    M12 × 1.75 mm13 mm32 mm32 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    M12 × 1.75 mm13 mm32 mm32 mmDurometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    M16 × 2 mm13 mm32 mm32 mmDurometer 80AHardRed-40 to 200SteelNoYes0000000000000
    M16 × 2 mm16 mm45 mm42 mmDurometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    M16 × 2 mm16 mm45 mm42 mmDurometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
    M20 × 2.5 mm25 mm57 mm57 mmDurometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
     
    Oil-Resistant Buna-N
    10-24
    		1/4"3/4"5/8"Durometer 70AHardWhite-60 to 175SteelYesNo000000000000
    10-32
    		1/4"3/4"5/8"Durometer 70AHardWhite-60 to 175SteelYesNo000000000000
    1/4"-20
    		1/4"3/4"5/8"Durometer 70AHardWhite-60 to 175SteelYesNo000000000000
    1/4"-28
    		1/4"3/4"5/8"Durometer 70AHardWhite-60 to 175SteelYesNo000000000000
    5/16"-18
    		1/4"3/4"5/8"Durometer 70AHardWhite-60 to 175SteelYesNo000000000000
    5/16"-24
    		1/4"3/4"5/8"Durometer 70AHardWhite-60 to 175SteelYesNo000000000000
    3/8"-16
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo000000000000
    3/8"-24
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo0000000000000
    7/16"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo000000000000
    1/2"-13
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo000000000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo0000000000000
    5/8"-11
    		5/8"1 3/4"1 5/8"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo0000000000000
    5/8"-18
    		5/8"1 3/4"1 5/8"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo0000000000000
    3/4"-10
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo0000000000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo0000000000000
     
    Style 2
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Reinforced Threaded-Hole Bumpers, Style 2.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Mounting
    Hole
    Size
    Dp.
    Lg.
    Wd.
    Ht.
    Ctr.-to-Ctr.
    Dp.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Base Plate
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Multipurpose Neoprene
    5/16"-18
    		1/8"4"2 1/2"2"3 1/4"1"Durometer 80AHardBlack-40 to 200SteelNoYes0000000000000
     

    Load-Rated Reinforced Threaded-Hole Bumpers

    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 1.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 2.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 3.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 4.

    Style 1

    Style 2

    Style 3

    Style 4

    These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 2,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
    Style 1
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Hole Bumpers, Style 1.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Rubber Blend—A good choice for outdoor use, these withstand sunlight, rain, and ozone better than Buna-N bumpers.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Rubber Blend with Steel Base Plate
    4-40
    		1/8"9/32"5/16"0.3Durometer 19ASoftBlack-10 to 150YesYes0000000000000
    6-32
    		3/16"13/32"1/2"0.6Durometer 19ASoftBlack-10 to 150YesYes000000000000
    8-32
    		3/16"13/32"1/2"0.6Durometer 19ASoftBlack-10 to 150YesYes000000000000
     
    Natural Rubber with Steel Base Plate
    1/4"-20
    		1/4"1"1/2"200Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    1/4"-20
    		1/4"1"3/4"140Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    5/16"-18
    		5/16"1"1"190Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    5/16"-18
    		5/16"1 1/2"3/4"440Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    5/16"-18
    		5/16"1 1/2"1"400Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    3/8"-16
    		3/8"1 1/2"1"400Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    3/8"-16
    		3/8"2"3/4"1,040Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    3/8"-16
    		3/8"2"1 5/8"670Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M3 × 0.5 mm3 mm8 mm8 mm7Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M3 × 0.5 mm3 mm8 mm8 mm12Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M3 × 0.5 mm3 mm8 mm8 mm30Durometer 70AHardBlack-40 to 170YesNo000000000000
    M3 × 0.5 mm3 mm8 mm13 mm11Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M3 × 0.5 mm3 mm8 mm13 mm30Durometer 70AHardBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm10 mm10 mm11Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm10 mm10 mm13Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M4 × 0.7 mm4 mm10 mm10 mm45Durometer 70AHardBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm10 mm15 mm15Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm10 mm15 mm35Durometer 70AHardBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm15 mm15 mm30Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm15 mm15 mm50Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M4 × 0.7 mm4 mm15 mm15 mm85Durometer 70AHardBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm15 mm20 mm30Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm15 mm20 mm60Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M4 × 0.7 mm4 mm15 mm20 mm130Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm15 mm65Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm15 mm100Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm15 mm150Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm20 mm80Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm20 mm180Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm25 mm60Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm25 mm85Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm25 mm230Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm15 mm130Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M6 × 1 mm6 mm25 mm15 mm360Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm20 mm120Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M6 × 1 mm6 mm25 mm20 mm310Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm30 mm65Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm30 mm110Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M6 × 1 mm6 mm25 mm30 mm260Durometer 70AHardBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm15 mm160Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm15 mm200Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M8 × 1.25 mm8 mm30 mm15 mm580Durometer 70AHardBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm20 mm120Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm20 mm220Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm20 mm420Durometer 70AHardBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm30 mm130Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm30 mm170Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm30 mm360Durometer 70AHardBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm40 mm170Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm40 mm20 mm260Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm40 mm20 mm270Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M8 × 1.25 mm8 mm40 mm20 mm1,060Durometer 70AHardBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm40 mm30 mm350Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M8 × 1.25 mm8 mm40 mm30 mm630Durometer 70AHardBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm40 mm40 mm220Durometer 40AMedium SoftBlack-40 to 170YesNo0000000000000
    M8 × 1.25 mm8 mm40 mm40 mm400Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M8 × 1.25 mm8 mm40 mm40 mm700Durometer 70AHardBlack-40 to 170YesNo000000000000
    M10 × 1.5 mm10 mm50 mm20 mm580Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm50 mm20 mm600Durometer 40AMedium SoftBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm50 mm20 mm1,670Durometer 70AHardBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm50 mm30 mm400Durometer 40AMedium SoftBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm50 mm30 mm550Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm50 mm30 mm1,210Durometer 70AHardBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm50 mm40 mm550Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm50 mm40 mm1,110Durometer 70AHardBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm60 mm30 mm720Durometer 40AMedium SoftBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm60 mm30 mm1,200Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm70 mm30 mm1,610Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm70 mm40 mm920Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm70 mm55 mm1,010Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M12 × 1.75 mm12 mm75 mm30 mm1,770Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M12 × 1.75 mm12 mm75 mm40 mm1,010Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M12 × 1.75 mm12 mm75 mm40 mm2,060Durometer 70AHardBlack-40 to 170YesNo0000000000000
    M12 × 1.75 mm12 mm75 mm50 mm980Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M16 × 2 mm16 mm100 mm40 mm1,820Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M16 × 2 mm16 mm100 mm40 mm2,110Durometer 40AMedium SoftBlack-40 to 170YesNo0000000000000
     
    Natural Rubber with Corrosion-Resistant Stainless Steel Base Plate
    1/4"-20
    		1/4"1"1/2"200Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    1/4"-20
    		1/4"1"3/4"140Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    5/16"-18
    		5/16"1"1"190Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    5/16"-18
    		5/16"1 1/2"3/4"440Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    5/16"-18
    		5/16"1 1/2"1"400Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    3/8"-16
    		3/8"1 1/2"1"400Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    3/8"-16
    		3/8"2"3/4"1,040Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    3/8"-16
    		3/8"2"1 5/8"670Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M3 × 0.5 mm3 mm8 mm8 mm12Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M4 × 0.7 mm4 mm10 mm10 mm13Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M4 × 0.7 mm4 mm15 mm15 mm50Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M4 × 0.7 mm4 mm15 mm20 mm60Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M6 × 1 mm6 mm20 mm15 mm100Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm25 mm85Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm15 mm130Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M6 × 1 mm6 mm25 mm20 mm120Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M6 × 1 mm6 mm25 mm30 mm110Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M8 × 1.25 mm8 mm30 mm15 mm200Durometer 55AMediumBlack-20 to 150YesNo0000000000000
    M8 × 1.25 mm8 mm30 mm20 mm220Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M8 × 1.25 mm8 mm40 mm20 mm270Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M8 × 1.25 mm8 mm40 mm30 mm350Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M8 × 1.25 mm8 mm40 mm40 mm400Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm50 mm20 mm580Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm50 mm30 mm550Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm50 mm40 mm550Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M10 × 1.5 mm10 mm50 mm50 mm600Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M12 × 1.75 mm12 mm75 mm30 mm1,770Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M12 × 1.75 mm12 mm75 mm40 mm1,010Durometer 55AMediumBlack-20 to 150YesNo00000000000000
     
    Abrasion-Resistant Polyurethane Rubber with Steel Base Plate
    4-40
    		1/8"9/32"5/16"2Durometer 48AMediumBlack60 to 100NoNo000000000000
    6-32
    		3/16"13/32"1/2"4Durometer 48AMediumBlack60 to 100NoNo000000000000
    8-32
    		3/16"13/32"1/2"4Durometer 48AMediumBlack60 to 100NoNo000000000000
    1/4"-20
    		1/4"5/8"5/8"12Durometer 48AMediumBlack60 to 100NoNo000000000000
    5/16"-18
    		5/16"1"3/4"45Durometer 48AMediumBlack60 to 100NoNo0000000000000
     
    Style 2
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Hole Bumpers, Style 2.
    Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Natural Rubber with Steel Base Plate
    1/4"-20
    		1/4"3/4"31/32"22Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    1/4"-20
    		1/4"31/32"1 1/4"33Durometer 55AMediumBlack-40 to 170YesNo000000000000
    5/16"-18
    		5/16"1 1/4"1 1/2"45Durometer 55AMediumBlack-40 to 170YesNo000000000000
    5/16"-18
    		5/16"1 1/2"1 3/4"140Durometer 55AMediumBlack-40 to 170YesNo000000000000
    3/8"-16
    		3/8"1 3/4"2"160Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    3/8"-16
    		3/8"2"2 1/4"190Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M5 × 0.8 mm5 mm10 mm10 mm10Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M5 × 0.8 mm5 mm10 mm10 mm13Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M5 × 0.8 mm5 mm10 mm10 mm25Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm15 mm29Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm24 mm18Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm20 mm24 mm22Durometer 55AMediumBlack-20 to 150YesNo00000000000
    M6 × 1 mm6 mm20 mm24 mm70Durometer 70AHardBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm20 mm42Durometer 55AMediumBlack-40 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm20 mm110Durometer 70AHardBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm30 mm30 mm30Durometer 55AMediumBlack-20 to 150YesNo00000000000
    M8 × 1.25 mm8 mm30 mm30 mm40Durometer 40AMedium SoftBlack-40 to 170YesNo000000000000
    M8 × 1.25 mm8 mm50 mm61 mm160Durometer 55AMediumBlack-20 to 150YesNo000000000000
    M8 × 1.25 mm8 mm50 mm61 mm340Durometer 70AHardBlack-40 to 170YesNo0000000000000
    M10 × 1.5 mm10 mm50 mm68 mm190Durometer 55AMediumBlack-20 to 150YesNo000000000000
    M10 × 1.5 mm10 mm50 mm68 mm430Durometer 70AHardBlack-40 to 170YesNo0000000000000
    M12 × 1.75 mm12 mm75 mm89 mm570Durometer 70AHardBlack-40 to 170YesNo0000000000000
     
    Style 3
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 3.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Hole Bumpers, Style 3.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    High-Temperature Silicone Rubber—Keep their shape and strength at higher temperatures than any of our other rubber bumpers.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Abrasion-Resistant Polyurethane Rubber with Steel Base Plate
    8-32
    		1/4"3/4"1/2"3Durometer 50 OOExtra SoftBlack-20 to 160NoNo00000000000
    8-32
    		1/4"3/4"1/2"6Durometer 70 OOSoftBlack-20 to 160NoNo0000000000
    1/4"-20
    		3/8"1 1/2"1"11Durometer 50 OOExtra SoftBlack-20 to 160NoNo000000000000
    1/4"-20
    		3/8"1 1/2"1"18Durometer 70 OOSoftBlack-20 to 160NoNo000000000000
    1/4"-20
    		3/8"1 3/4"27/32"20Durometer 50 OOExtra SoftBlack-20 to 160NoNo000000000000
    1/4"-20
    		3/8"1 3/4"27/32"35Durometer 70 OOSoftBlack-20 to 160NoNo000000000000
    M4 × 0.7 mm6 mm19 mm13 mm3Durometer 50 OOExtra SoftBlack-20 to 160NoNo000000000000
    M4 × 0.7 mm6 mm19 mm13 mm6Durometer 70 OOSoftBlack-20 to 160NoNo000000000000
    M6 × 1 mm9 mm38 mm25 mm18Durometer 70 OOSoftBlack-20 to 160NoNo000000000000
    M6 × 1 mm9 mm45 mm22 mm20Durometer 50 OOExtra SoftBlack-20 to 160NoNo000000000000
    M6 × 1 mm9 mm45 mm22 mm35Durometer 70 OOSoftBlack-20 to 160NoNo000000000000
     
    High-Temperature Silicone Rubber with Steel Base Plate
    1/4"-20
    		1/4"1"3/4"25Durometer 30ASoftBlack-80 to 300YesYes00000000000
    1/4"-20
    		1/4"1"3/4"35Durometer 40AMedium SoftGreen-80 to 300YesYes0000000000
    1/4"-20
    		1/4"1"3/4"50Durometer 50AMediumOrange-80 to 300YesYes00000000000
    1/4"-20
    		1/4"1"3/4"65Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    1/4"-20
    		1/4"1"3/4"90Durometer 70AHardOrange-80 to 300YesYes00000000000
    5/16"-18
    		3/8"1 1/2"1"60Durometer 30ASoftBlack-80 to 300YesYes00000000000
    5/16"-18
    		3/8"1 1/2"1"90Durometer 40AMedium SoftGreen-80 to 300YesYes00000000000
    5/16"-18
    		3/8"1 1/2"1"125Durometer 50AMediumOrange-80 to 300YesYes00000000000
    5/16"-18
    		3/8"1 1/2"1"175Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    5/16"-18
    		3/8"1 1/2"1"220Durometer 70AHardOrange-80 to 300YesYes00000000000
    M6 × 1 mm6 mm25 mm19 mm25Durometer 30ASoftBlack-80 to 300YesYes00000000000
    M6 × 1 mm6 mm25 mm19 mm35Durometer 40AMedium SoftGreen-80 to 300YesYes00000000000
    M6 × 1 mm6 mm25 mm19 mm50Durometer 50AMediumOrange-80 to 300YesYes00000000000
    M6 × 1 mm6 mm25 mm19 mm65Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    M6 × 1 mm6 mm25 mm19 mm90Durometer 70AHardOrange-80 to 300YesYes0000000000
    M8 × 1.25 mm8 mm38 mm25 mm60Durometer 30ASoftBlack-80 to 300YesYes00000000000
    M8 × 1.25 mm8 mm38 mm25 mm90Durometer 40AMedium SoftGreen-80 to 300YesYes00000000000
    M8 × 1.25 mm8 mm38 mm25 mm125Durometer 50AMediumOrange-80 to 300YesYes00000000000
    M8 × 1.25 mm8 mm38 mm25 mm175Durometer 60AMedium HardOrange-80 to 300YesYes00000000000
    M8 × 1.25 mm8 mm38 mm25 mm225Durometer 70AHardOrange-80 to 300YesYes00000000000
     
    Style 4
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 4.
    Image of Attribute. Front orientation. CrossSection view. Contains Annotated. Load-Rated Reinforced Threaded-Hole Bumpers, Style 4.
    Oil-Resistant Buna-N—These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Oil-Resistant Buna-N with Steel Base Plate
    10-24
    		3/16"3/4"5/8"24Durometer 55AMediumBlack-20 to 170YesNo0000000000000
    1/4"-20
    		1/4"31/32"13/16"95Durometer 55AMediumBlack-20 to 170YesNo000000000000
    5/16"-18
    		5/16"1 1/4"1"200Durometer 55AMediumBlack-20 to 170YesNo0000000000000
    5/16"-18
    		5/16"1 1/2"1 1/4"270Durometer 55AMediumBlack-20 to 170YesNo0000000000000
    3/8"-16
    		3/8"1 31/32"1 11/16"360Durometer 55AMediumBlack-20 to 170YesNo0000000000000
    M5 × 0.8 mm5 mm19 mm16 mm24Durometer 55AMediumBlack-20 to 170YesNo000000000000
    M6 × 1 mm6 mm25 mm21 mm95Durometer 55AMediumBlack-20 to 170YesNo000000000000
    M8 × 1.25 mm8 mm32 mm26 mm200Durometer 55AMediumBlack-20 to 170YesNo0000000000000
    M8 × 1.25 mm8 mm38 mm32 mm270Durometer 55AMediumBlack-20 to 170YesNo0000000000000
     
    Oil-Resistant Buna-N with Corrosion-Resistant Stainless Steel Base Plate
    10-24
    		3/16"3/4"5/8"24Durometer 55AMediumBlack-20 to 170YesNo0000000000000
    1/4"-20
    		1/4"31/32"13/16"95Durometer 55AMediumBlack-20 to 170YesNo0000000000000
    5/16"-18
    		5/16"1 1/4"1"200Durometer 55AMediumBlack-20 to 170YesNo0000000000000
     

    Bumper Assortments

    Image of Product. Front orientation. Bumpers. Bumper Assortments.
    Keep a range of shapes and sizes on hand to protect a variety of parts.
    Includes
    No. of
    Pieces
    Color
    Container
    Type
    Each
    7/16" Domed Black Rubber Bumpers with 6-32 Threaded Stud (4 ea.)
    3/4" Round Black Rubber Bumpers with Unthreaded Hole (4 ea.)
    13/16" Round Black Rubber Bumpers with Unthreaded Hole (4 ea.)
    9/16" Round Black Rubber Bumpers with Push-In Stem (10 ea.)
    1" Round Black Rubber Bumpers with Push-In Stem (5 ea.)
    13/16" Tapered Square Adhesive-Back Black Polyurethane Rubber Bumpers (12 ea.)
    1/2" Round Adhesive-Back White Plastic Bumpers (4 ea.)
    1/2" Round Adhesive-Back Black Felt Bumpers (50 ea.)    		93Black, WhitePlastic Case000000000000
    back to top