Multiple joints allow up/down and in/out movement in addition to 360° rotation. These arms are often used to hold exhaust hose in place.

Attach a monitor to these stands, then route cords through the hollow mounting poles for a clean, organized appearance.

Ball-and-socket connections allow 360° positioning.

Bend these arms to hold small equipment such as lights and microphones in almost any position.

A suction base makes it easy to move and attach these arms to smooth surfaces such as glass and polished metal.

Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly.

Also known as hatch springs, these supports are commonly used on hatches and other top-opening lids. Raise the lid to extend the spring, which props the lid open—an internal cable keeps the spring from overextending. Press the center of the spring to release the hold and close the lid.

Keep environments free of contaminants—with plastic bushings, there's no metal-to-metal contact that can release particles as these supports open and close. Manually control these free-moving lid supports through their full range of motion. Raise the lid until the hold-open mechanism on the support is engaged; slightly lift it again to release the hold and close the lid.

No separate hinges are required, these supports act as a hinge and lid support all in one. Springs provide lifting assistance to raise and hold lids open—slightly lift the lid to get it started and the support will do the rest. Manually shut the lids and the supports will hold them in the closed position.

Requiring less space to mount and operate, these supports are often used on small cabinets and enclosures. They gradually slow your lid's motion to prevent it from slamming open. To open lids, lower them and the support will slowly and softly do the rest. Manually shut the lids and the supports will hold them in the closed position.

Providing constant resistance through the full range of motion, these supports hold lids open at any angle up to 70°. Simply raise or lower the lid and let go—friction keeps it in position.

Move the hose into position and the support arm will hold it in place.