Wire Connection Type Wire Connection Type |
|---|
 |  |
| Screw Terminals | Wire Leads |
System of Measurement System of Measurement |
|---|
|
Maximum Voltage Maximum Voltage |
|---|
|
Switch Starting Position Switch Starting Position |
|---|
|
Industry Designation Industry Designation | Show |
|---|
|
Industry Designation Industry Designation | Hide |
|---|
Relative Humidity Accuracy Relative Humidity Accuracy |
|---|
|
Maximum Relative Humidity Maximum Relative Humidity |
|---|
|
For Probe Type For Probe Type |
|---|
|
Relay Type Relay Type |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
| Hardwire |
Actuation Point Adjustability Actuation Point Adjustability |
|---|
|
Housing Material Housing Material |
|---|
|
Adjustment Method Adjustment Method |
|---|
|
Autocorrecting Precision Panel-Mount Temperature Controllers
For high accuracy in applications with fluctuating conditions, these controllers have proportional-integral-derivative (PID) software with fuzzy logic that learns system behavior and automatically compensates for changes. They read temperature with a highly sensitive thermocouple or RTD probe (sold separately) in critical process applications to turn heating equipment on or off at a specified temperature. All fit DIN cutouts for installation into instrument panels. Use the keypad to set the actuation point. Controllers are auto/manual selectable. They meet American, Canadian, and European safety standards.
Mechanical relays actuate circuits directly. All are single pole, single throw (SPST) and turn circuits from off to on (normally open).
Signal relays output 4-20 mA current to actuate equipment on a current loop.
Solid-state relays actuate an external relay (not included). They have a longer service life than mechanical and signal relays.
To mount 1/16 DIN controllers to a surface or DIN rail, add DIN-rail/surface-mount adapters. To convert larger cutouts to fit 1/16 DIN controllers, add DIN cutout adapters.
Temp. Range | Temp. Accuracy | ||||||
|---|---|---|---|---|---|---|---|
| RTD Probe | Type J Probe | Type K Probe | Type T Probe | RTD Probe | Type J Probe | Type K Probe | Type T Probe |
| -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | ±0.7° F ±0.4° C | ±3.6° F ±2° C | ±3.6° F ±2° C | ±3.6° F ±2° C |
Temp. Range | No. of | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Relay Type | RTD Probe | Type J Probe | Type K Probe | Type T Probe | Control Relays | Alarm Relays | Voltage Range (Electrical Phase) | Output Voltage | Current | Output Current | Each | |
1/32 DIN–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout | ||||||||||||
| Mechanical Signal | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 2 | 1 | 90V AC to 250V AC (Single) | 240V AC | 2.0A | 4-20mA 4-20mA | 00000000 | 0000000 |
| Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 2 | 1 | 90V AC to 250V AC (Single) | 14V DC 240V AC | 2.0A | 4-20mA | 00000000 | 000000 |
1/16 DIN–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout | ||||||||||||
| Mechanical Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 0 | 90V AC to 250V AC (Single) | 14V DC 240V AC 240V AC | 2.0A 2.0A | __ | 00000000 | 000000 |
| Mechanical Signal | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 2 | 0 | 90V AC to 250V AC (Single) | 240V AC | 2.0A | 4-20mA | 00000000 | 000000 |
| Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 2 | 0 | 90V AC to 250V AC (Single) | 14V DC 240V AC | 2.0A | __ | 00000000 | 000000 |
1/8 DIN–For 1 3/4" Ht. × 3 5/8" Wd. Panel Cutout | ||||||||||||
| Mechanical Mechanical Signal | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 240V AC 240V AC | 2.0A 2.0A | 4-20mA | 00000000 | 000000 |
| Mechanical Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 14V DC 240V AC 240V AC | 2.0A 2.0A | __ | 00000000 | 000000 |
1/8 DIN–For 3 5/8" Ht. × 1 3/4" Wd. Panel Cutout | ||||||||||||
| Mechanical Mechanical Signal | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 240V AC 240V AC | 2.0A 2.0A | 4-20mA | 00000000 | 000000 |
| Mechanical Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 14V DC 240V AC 240V AC | 2.0A 2.0A | __ | 00000000 | 000000 |
3/16 DIN–For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout | ||||||||||||
| Mechanical Mechanical Signal | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 240V AC 240V AC | 2.0A 2.0A | 4-20mA | 00000000 | 000000 |
| Mechanical Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 14V DC 240V AC 240V AC | 2.0A 2.0A | __ | 00000000 | 000000 |
1/4 DIN–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout | ||||||||||||
| Mechanical Mechanical Signal | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 240V AC 240V AC | 2.0A 2.0A | 4-20mA | 00000000 | 000000 |
| Mechanical Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 1 | 90V AC to 250V AC (Single) | 14V DC 240V AC 240V AC | 2.0A 2.0A | __ | 00000000 | 000000 |
| Mechanical Mechanical Solid State | -345° to 1290° F -210° to 700° C | -180° to 1830° F -120° to 1000° C | -325° to 2495° F -200° to 1370° C | -415° to 750° F -250° to 400° C | 3 | 2 | 90V AC to 250V AC (Single) | 14V DC 240V AC 240V AC | 2.0A 2.0A | __ | 00000000 | 000000 |
Mounting | ||||
|---|---|---|---|---|
| Fasteners Included | Screw Size | Number of Holes | Each | |
| No | No. 6 | 2 | 000000000 | 000000 |
Panel-Mount Humidity Controllers
The sensor monitors relative humidity and triggers the controller to turn equipment on or off. Sensor and controller are sold separately.
Controller is single pole, double throw (SPDT). It can be set to turn one circuit from off to on (normally open) or from on to off (normally closed). Set the actuation point with the keypad.
Relative Humidity | For Panel Cutout | No. of | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Range | Accuracy | Max. Operating Temp., °F | Ht. | Wd. | Actuation Points | Circuits Controlled | Wire Connection Type | Voltage | Ht. | Wd. | Dp. | Housing Material | Each | |
| 10% to 100% | ±1% | 158° | 1 9/64" | 2 13/16" | 2 | 1 | Screw Terminals | 120V AC | 1 11/32" | 3" | 2 3/8" | Plastic | 00000000 | 000000 |
Remote Room-Monitoring Adjustable Thermostats
If ambient air temperature rises above or falls below an actuation point, this thermostat flashes the current temperature reading on the display and shows a “high” or “low” message. To actuate remote-mount buzzers (not included), it has two single pole, double throw (SPDT) relays that can each be set to turn one circuit from “off” to “on” (normally open) or from “on” to “off” (normally closed). Switch has a built-in ambient temperature sensor.
12-volt DC power supply (not included) is required.
Remote-mount buzzers (not included) emit an 86 dB alarm when temperature reaches the actuation point.
Remote temperature sensors (not included) let you monitor temperature up to 1,000 feet from the switch. Remote sensors can be used simultaneously with the switch’s built-in ambient temperature sensor for monitoring two areas.
