System of Measurement System of Measurement |
|---|
|
Thread Size Thread Size | Show |
|---|
|
Thread Size Thread Size | Hide |
|---|
Type Type |
|---|
 | Adapter |
Shape Shape |
|---|
 | Straight |
For Use With For Use With |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Flared Connection Type Flared Connection Type |
|---|
 | Internal |
Swivel Type Swivel Type |
|---|
|
For Tube Material For Tube Material |
|---|
|
For Hose Material For Hose Material |
|---|
|
Gasket Material Gasket Material |
|---|
|
Maximum Vacuum Maximum Vacuum |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with a clamp or a crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. They have good corrosion resistance. Fittings that swivel until tightened rotate 360° for easy installation. Fittings with a threaded end are also known as hose nipples.
Metric and UN/UNF (SAE) male threads with gasket protect against leaks. UN/UNF (SAE) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 120 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Worm-Drive Clamps or Crimp-On Hose Ferrules, except For 5/16" Hose ID: Use Crimp-On Hose Ferrules
- Specifications Met: SAE J476
30° Flared Fittings for Steel Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Water
- Tubing: Use with steel
Also known as JIS (Japanese Industrial Standard) fittings, these have a 30° flare on one or both ends. Fittings are zinc-plated steel for fair corrosion resistance.
- Temperature Range: -65° to 500° F
- Specifications Met: ISO 8434, JIC, JIS, SAE J514
Fittings that swivel until tightened have a built-in nut that rotates 360° for easy installation.
Fittings with female tube end have an internal flare that mates with the male tube end of another fitting.
| For Tube OD | Material | Max. Pressure | Each | |
| 5/8" | Zinc-Plated Steel | 4,500 psi @ 72° F | 0000000 | 000000 |