Use these cords with computers, lab equipment, and office machines that have IEC connections.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Power multiple devices from one power source.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Hardwire these cords to equipment.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired.

Connect computers, monitors, printers, and other devices with DB connections.

Display video from one source on two different monitors.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

Connect devices such as computers, printers, and mobile devices.

Pinch the sides on the plugs of these cords to insert them; they lock into a socket to prevent the cord from detaching.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

The shielding blocks signal interference from nearby equipment and devices.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

Unlike the RJ45 ends on traditional Ethernet cords, the threaded M8 ends on these cords keep contaminants out and resist coming loose from vibration.

Make quick, secure connections between your development board and your system’s components, such as sensors and actuators.

Play audio from one source on two different speakers.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Often used in assembly line networks and Fieldbus connections, these cords have B-coded M12 connections.

Transmit data between computers, connect two like cables, or connect devices that have different USB sizes or styles.

Send video and audio from a single DisplayPort output to multiple displays. These splitters are often used to show the same image on multiple screens or to stretch a computer desktop across two monitors.

Play audio and 4K video from a single source on multiple displays. These HDMI splitters are handy for classrooms, conference rooms, factory floors, and trade shows.

Assemble DB and HD connectors to replace worn out connectors.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Protect computers and other sensitive equipment from signal interference; these receptaces are also known as isolated ground receptacles. They turn to lock together when mated to prevent accidental disconnection.

Protect your mated connections from moisture and light splashing.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Protect Mil. Spec. connectors when not in use.

Caps are watertight to protect hazardous location safe-break plugs when not in use.

Protect mini connectors when not in use.

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.

Use this cable for complex and high-speed data and signal transmission.

Use these cables to connect measuring tools with SPC data output directly to a PC.

Wirelessly transmit data from measuring tools with SPC output to a PC.

Adapt 10-pin cables for connection to a USB port on a PC.

Convert 10-pin cables to RS-232C for connection to PCs.

Use these cables to connect measuring tools with SPC data output directly to a PC.