Choose a Category
Clear All
Capacity Capacity | Show |
|---|
|
Capacity Capacity | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
Power Source Power Source |
|---|
|
Grease Outlet Pipe Size Grease Outlet Pipe Size |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Flow Control Flow Control |
|---|
|
For Maximum AGMA Viscosity Grade For Maximum AGMAViscosity Grade |
|---|
|
For Maximum ISO Viscosity Grade For Maximum ISOViscosity Grade |
|---|
|
For Maximum SAE Viscosity Grade For Maximum SAEViscosity Grade |
|---|
|
For Maximum SSU Viscosity Grade For Maximum SSUViscosity Grade |
|---|
|
Pressure Regulation Pressure Regulation |
|---|
|
Housing Material Housing Material |
|---|
|
Number of Oil Outlets Number of Oil Outlets |
|---|
|
Oil Outlet Connection Type Oil Outlet Connection Type |
|---|
|
Oil Outlet Gender Oil Outlet Gender |
|---|
|
Oil Outlet Thread Type Oil Outlet Thread Type |
|---|
|
Flow Rate Flow Rate |
|---|
|
Grease Inlet Pipe Size Grease Inlet Pipe Size |
|---|
|
Oil Reservoirs
140° F Max. Temp.
Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush (each sold separately) to create a dispenser.
Reservoirs with 140° F max. temp. have NPTF (Dryseal) threads, which are compatible with NPT threads. Flow rate depends on temperature.
Reservoirs—140° F Max. Temp.
For Max. Viscosity | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Each | |
1/8 NPTF Male Outlet | |||||||||||
| 1 3/4 oz. | 2" | 3 1/8" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 000000 |
1/4 NPTF Male Outlet | |||||||||||
| 1 3/4 oz. | 2" | 3 3/8" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 00000 |
Adjustable-Flow Grease Dispensers
Turn the metering pin to adjust flow rate. As grease is dispensed, the stem at the top of the cup descends to indicate when the cup needs refilling. Dispensers have a standard grease fitting for filling. Flow rate depends on temperature.
For technical drawings and 3-D models, click on a part number.
Grease Outlet | Grease Inlet | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., oz. | For NLGI Viscosity Grade | Bowl Dia. | Overall Ht. | Thread Type | Pipe Size | Gender | Bowl Material | Thread Type | Pipe Size | Gender | Temp. Range, °F | 1-2 | 3-Up | |
| 1 3/4 | 1, 2, 3 | 2 1/2" | 4 5/16" | NPT | 3/8 | Male | Steel | NPT | 1/4 | Female | 32° to 180° | 0000000 | 0000000 | 0000000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)