Capacity Capacity | Show |
---|
|
Capacity Capacity | Hide |
---|
For Use With For Use With |
---|
|
Flow Control Flow Control |
---|
|
Overall Height Overall Height |
---|
|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Bowl Type Bowl Type |
---|
|
Pressure Regulation Pressure Regulation |
---|
|
Oil Outlet Connection Type Oil Outlet Connection Type |
---|
|
Housing Material Housing Material |
---|
|
Push down on the spring-loaded drain plate to submerge and agitate to clean parts. The drain plate acts as a flame arrester in the event of a fire.
Drain Plate | ||||||||
---|---|---|---|---|---|---|---|---|
Cap., gal. | OD | O'all Ht. | Dia. | Material | Material | Specifications Met | Each | |
For Solvent-Based Solutions | ||||||||
1/4 | 5" | 5 1/2" | 4 1/2" | Steel | Steel | FM Approved | 000000 | 000000 |
Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush (each sold separately) to create a dispenser.
Reservoirs with 140° F max. temp. have NPTF (Dryseal) threads, which are compatible with NPT threads. Flow rate depends on temperature.
Reservoirs with removable filter prevent valve blockage.
For Max. Viscosity | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Each | |
3/8 NPTF Male Outlet | |||||||||||
1 qt. | 4 1/4" | 7 15/16" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 000000 |
1/2 NPTF Male Outlet | |||||||||||
1 qt. | 4 1/4" | 8 1/16" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 00000 |
For Max. Viscosity | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Overall Ht. | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Each | |
1/2 NPT Male Outlet | ||||||||||
1 qt. | 3 5/8" | 10 3/16" | Plastic | Vented | 150 | 90W | 700 | 4 | 0000000 | 000000 |
For Max. Viscosity | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Overall Ht. | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Wire Mesh Material | Removes Particle Size Down To | Each | |
1/2 NPT Male Outlet | ||||||||||||
1 qt. | 3 5/8" | 10 3/16" | Plastic | Vented | 150 | 90W | 700 | 4 | 304 Stainless Steel | 149 microns | 0000000 | 000000 |
Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
For Max. Viscosity | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Each | |
160° F Max. Temp. | ||||||||||||
1/2 NPTF Male Outlet | ||||||||||||
1 qt. | 4 1/4" | 10 1/8" | Aluminum | Plastic | Vented | 320 | 90 | 1,500 | 6 | Glass Flow Sight | 0000000 | 000000 |
250° F Max. Temp. | ||||||||||||
1/2 NPTF Male Outlet | ||||||||||||
1 qt. | 4 1/4" | 10 1/8" | Aluminum | Glass | Vented | 320 | 90 | 1,500 | 6 | Glass Flow Sight | 0000000 | 000000 |
Replacement Glass Sights for 3" to 5 1/2" Bowl Dia. | 000000 | Each | 00000 |
Connect a tube fitting and tubing (not included) to the dispenser outlet to access hard-to-reach lubrication points. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
For Max. Viscosity | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Includes | Each | |
1/8 NPTF Female Outlet | |||||||||||||||
1 qt. | 4 1/4" | 9 3/8" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 320 | 90 | 1,500 | 6 | Glass Flow Sight | Nut, Washer | 0000000 | 000000 |
Serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Change the reservoir flow by turning the dial on the bowl. Flip the lever to start and stop flow to all of the valves at once. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Features | Each | |
2 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 12" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 0000000 |
3 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 12" | 5" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
4 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 12" | 5 7/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 12" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
Customize these dispensers to serve up to 24 lubrication points from a single location. Dispensers come with two flow-adjustment valves and can accommodate up to 24 valves total. Additional valves are sold separately. Valves thread together to make a sealed connection. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Flip the lever to start and stop flow to all of the valves at once.
Overall | For Max. Viscosity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Ht. | Wd. | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Each | |
2 Outlets—For 1/4" Tube OD | ||||||||||||||
1 qt. | 3 5/8" | 13 7/16" | 3 15/16" | Plastic | Vented | 225° | 5/8"-18 | 150 | 90W | 700 | 4 | Vented Glass Sight | 0000000 | 0000000 |
Additional Flow-Adjustment Valve | 0000000 | Each | 000000 |
A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Overall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Each | |
120V AC 0.1A Current | ||||||||||
For 1/4" Outlet Tube OD | ||||||||||
1 qt. | 4 1/4" | 9 5/16" | 5 11/16" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 0000000 | 0000000 |
24V DC 0.4A Current | ||||||||||
For 1/4" Outlet Tube OD | ||||||||||
1 qt. | 4 1/4" | 9 5/16" | 5 11/16" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 0000000 | 000000 |
Serve multiple lubrication points from a single location. These dispensers have a solenoid that automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. To adjust the flow to individual lubrication points, turn the dial on the corresponding valve. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Features | Each | |
120V AC 0.1A Current | |||||||||||
2 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 0000000 |
3 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 5" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
4 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 5 7/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
24V DC 0.4A Current | |||||||||||
2 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
3 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 5" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
4 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 5 7/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||
1 qt. | 4 1/4" | 9 3/4" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
Flip the lever to start and stop the flow of oil through the brush; turn the dial to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Bristle | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Brush Wd. | Overall Ht. | Ht. | Material | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Features | Each | |
1 qt. | 4 1/4" | 1 1/2" | 12 9/16" | 1 5/32" | Nylon Plastic | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 0000000 |
Lubricate sheet stock before stamping and forming to extend die life and ensure high quality. Dispenser has two carpet rollers. The top roller is fed by a perforated tube that drips lubricant onto the roller. The bottom roller picks up lubricant from a pan below. The perforated tube is fed by a tank at the top of the dispenser. An overflow valve in the bottom pan stops flow to prevent overfilling and spilling lubricant.
Vinyl rollers can be used to apply a very thin coating, such as vanishing oil.
Wipers control the amount of lubricant on sheet stock.
Overall | For Max. Viscosity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Material Wd. | For Max. Material Thick. | Cap., qt. | Lg. | Wd. | Ht. | Material | Applicator Material | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Each | |
8" | 1/4" | 1 | 10 1/2" | 4 1/2" | 13 3/4" | Steel | Carpet | 100 | 80 | 500 | 3 | Overflow Valve | 0000000 | 0000000 |
A solenoid automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust the flow of oil through the brush. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Overall | Bristle | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Bowl Dia. | Brush Wd. | Ht. | Wd. | Ht. | Material | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Each | |
120V AC 0.1A Current | |||||||||||||
1 qt. | 4 1/4" | 1 1/2" | 11 3/4" | 5 11/16" | 1 5/32" | Nylon Plastic | Aluminum | Plastic | Vented | 140° | 5/8"-18 | 0000000 | 0000000 |
24V DC 0.4A Current | |||||||||||||
1 qt. | 4 1/4" | 1 1/2" | 11 3/4" | 5 11/16" | 1 5/32" | Nylon Plastic | Aluminum | Plastic | Vented | 140° | 5/8"-18 | 0000000 | 000000 |
Ready to connect to your air system, these complete systems include a timer and a reservoir. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw. Pumps and their components come mounted on a panel.
Panel | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pumps | Cap. | Oz. per Cycle | Dispensing Interval | Max. Oil Outlet Pressure, psi | Ht. | Wd. | Reservoir Material | Air Inlet Pressure, psi | For Air Inlet Tube OD | Voltage | Current, A | Temp. Range, °F | For Max. ISO Viscosity Grade | Each | |
1/8 NPT Female Outlets | |||||||||||||||
4 | 1 qt. | 0-0.007 | 0.6 sec.-24 hrs. | 1,080 | 10 3/4" | 10 7/8" | Plastic | 40-120 | 1/4" | 120V AC | 0.06 | -15° to 180° | 220 | 000000 | 0000000 |
Oil Outlet | Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | No. of | Thread Type | Pipe Size | Gender | Ht. | Wd. | Dp. | Reservoir Material | Temp. Range, °F | Thread Size | Hole Dia. | Fasteners Included | Each | |
1 qt. | 1 | NPT | 1/8 | Female | 6 13/16" | 4 3/8" | 4 3/8" | Plastic | 0° to 225° | 5/8"-18 | 13/64" | No | 0000000 | 000000 |
With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use retaining ring pliers to turn the flow-adjustment nut. Pumps and their components come mounted on a panel.
Panel | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pumps | Cap. | Oz. per Cycle | Dispensing Interval | Max. Oil Outlet Pressure, psi | Ht. | Wd. | Reservoir Material | Pump Material | Voltage | Current, A | Temp. Range, °F | For Max. ISO Viscosity Grade | Each | |
1/8 NPT Female Outlets | ||||||||||||||
4 | 1 qt. | 0-0.005 | 1 min.-24 hrs. | 100 | 10 3/4" | 10 7/8" | Plastic | Aluminum | 120V AC | 0.06 | -15° to 120° | 220 | 000000 | 0000000 |
Oil Outlet | Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | No. of | Thread Type | Pipe Size | Gender | Ht. | Wd. | Dp. | Reservoir Material | Temp. Range, °F | Thread Size | Hole Dia. | Fasteners Included | Each | |
1 qt. | 1 | NPT | 1/8 | Female | 6 13/16" | 4 3/8" | 4 3/8" | Plastic | 0° to 225° | 5/8"-18 | 13/64" | No | 0000000 | 000000 |