16 Oz. Tanks | McMaster-Carr

Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.

Powder-coated steel cans are for petroleum-based liquids. Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Powder-Coated Steel

Style	Cap.	Dia.	Ht.	Fill Opening Dia.	Specifications Met	Color		Each
A	16 oz.	4 1/2"	6 3/4"	7/8"	OSHA Compliant 29 CFR 1910.106, UL Listed, C-UL Listed, NFPA Code 30, FM Approved	Red	0000000	000000

Filled Propane Cylinders

Use propane in heating, thawing, and soldering applications. These cylinders cannot be sold to Canada due to local regulatory limits on carbon based fuels.

						Outlet								Each
Capacity, oz.	Dia.	Ht.	Refillable	Max. Flame Temperature, °F	Max. Flame Temperature with Oxygen, °F	CGA Number	Thread Size	Thread Type	Thread Direction	Gender	Specifications Met	Cannot Be Sold To		1-11	12-Up
16	3 7/8"	7 3/4"	No	3600°	4600°	CGA 600	1"-20	UNF	Right Hand	Male	D.O.T. 39	Canada	0000000	000000	000000

Droplet Coolant Dispensers

Deliver a small, controlled amount of coolant to a workpiece. Turn the knobs to set the air flow and the number of droplets per minute for each coolant stream. Dispenser has two any-which-way nozzles that stay in place once positioned. Each nozzle has a magnetic base.

Note: Dispenser is only for use with synthetic- and vegetable-based coolants (sold separately).

Mounting kit (sold separately) is magnetic, so it’s easy to move the system from one machine to another.

				Nozzle				O'all
Cap., oz.	Droplets per Minute	Max. Pressure, psi	Coolant Outlet Hose Lg.	Lg.	Type	Nozzle Material	Bend Radius	Ht.	Wd.	Dp.	Reservoir Material	For Max. SSU Viscosity Grade	Air Inlet Pressure, psi	Voltage		Each
For Use With Coolant
16	2-16	125	6 ft.	18"	Flexible	Acetal Plastic	1 3/4"	7 1/16"	10 1/16"	7 1/16"	Polyethylene Plastic	200	60-125	120V AC	00000000	000000000

Synthetic Coolant, 1-gal. Containers	Each	0000000
Mounting Kits	Each	00000
Replacement Reservoirs	Each	00000
Vegetable Coolant, 1-gal. Containers	Each	000000
Replacement Nozzles	Each	000000

Oil Reservoirs

140Â° F Max. Temp.

225Â° F Max. Temp.

Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush (each sold separately) to create a dispenser.

Reservoirs with 140° F max. temp. have NPTF (Dryseal) threads, which are compatible with NPT threads. Flow rate depends on temperature.

Reservoirs with removable filter prevent valve blockage.

Reservoirs—140° F Max. Temp.

						For Max. Viscosity
Cap.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each
3/8 NPTF Male Outlet
16 oz.	3 1/2"	6 9/16"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	0000000	000000
1/2 NPTF Male Outlet
16 oz.	3 1/2"	6 5/8"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	0000000	00000

Reservoirs—225° F Max. Temp.

					For Max. Viscosity
Cap.	Bowl Dia.	Overall Ht.	Bowl Material	Pressure Regulation	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each
1/2 NPT Male Outlet
16 oz.	3 5/8"	6 13/16"	Plastic	Vented	150	90W	700	4	0000000	000000

Reservoirs with Removable Aluminum Filter—225° F Max. Temp.

					For Max. Viscosity
Cap.	Bowl Dia.	Overall Ht.	Bowl Material	Pressure Regulation	ISO Grade	SAE Grade	SSU Grade	AGMA Grade	Wire Mesh Material	Removes Particle Size Down To		Each
1/2 NPT Male Outlet
16 oz.	3 5/8"	6 13/16"	Plastic	Vented	150	90W	700	4	304 Stainless Steel	149 microns	0000000	000000

Sealed-System Constant-Level Oil Reservoirs

A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure. Designed to maintain a constant level of oil in bearing housings, gear boxes, and similar closed machinery, when oil falls below the set level, these reservoirs automatically replenish the supply. They have oil outlets on the side and bottom for flexibility in installation. For applications that require adjustable flow control, pair with a flow-adjustment valve (sold separately).

Oil Reservoirs
					Pressure Port			For Max. Viscosity						Replacement Bowls		Optional Wire Guards
Cap., oz.	Flow Rate, oz./sec.	Bowl Dia.	Overall Ht.	Housing Material	Thread Type	Pipe Size	Max. Temp., °F	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each		Each		Each
1/4 NPT Female Outlet
Glass Bowl
16	0.1	4 1/8"	9 5/8"	Zinc	NPT	1/8	250°	680	140	3,000	8	0000000	0000000	0000000	000000	0000000	000000

Vented-System Constant-Level Oil Reservoirs

For use in clean environments, these oil reservoirs have multiple air vents that keep pressure balanced. They maintain a constant level of oil in bearing housings, gear boxes, and similar closed machinery. When oil falls below the set level, these reservoirs automatically replenish the supply. They have oil outlets on the side and bottom for flexibility in installation. For applications that require adjustable flow control, pair with a flow-adjustment valve (sold separately).

Oil Reservoirs
						For Max. Viscosity						Replacement Bowls		Optional Wire Guards
Cap., oz.	Flow Rate, oz./sec.	Bowl Dia.	Overall Ht.	Housing Material	Max. Temp., °F	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each		Each		Each
1/4 NPT Female Outlet
Glass Bowl
16	0.1	4 1/8"	7 9/16"	Zinc	250°	680	140	3,000	8	0000000	000000	0000000	000000	0000000	000000

Oil Dispensers with Flow-Adjustment Valve

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

						For Max. Viscosity
Cap.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation	ISO Grade	SAE Grade	SSU Grade	AGMA Grade	Features		Each
160° F Max. Temp.
3/8 NPTF Male Outlet
16 oz.	3 1/2"	8 15/16"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000
1/2 NPTF Male Outlet
16 oz.	3 1/2"	9 1/8"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	00000
250° F Max. Temp.
3/8 NPTF Male Outlet
16 oz.	3 1/2"	8 15/16"	Aluminum	Glass	Vented	320	90	1,500	6	Glass Flow Sight	0000000	00000
1/2 NPTF Male Outlet
16 oz.	3 1/2"	9 1/8"	Aluminum	Glass	Vented	320	90	1,500	6	Glass Flow Sight	0000000	00000

Replacement Glass Sights for 3" to 5 1/2" Bowl Dia.

000000

Each

00000

Remote-Access Oil Dispensers with Flow-Adjustment Valve

Connect a tube fitting and tubing (not included) to the dispenser outlet to access hard-to-reach lubrication points. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

								For Max. Viscosity
Cap.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation	Max. Temp., °F	Mounting Thread Size	ISO Grade	SAE Grade	SSU Grade	AGMA Grade	Features	Includes		Each
1/8 NPTF Female Outlet
16 oz.	3 1/2"	8 15/16"	Aluminum	Plastic	Vented	160°	5/8"-18	320	90	1,500	6	Glass Flow Sight	Nut, Washer	0000000	000000

Sealed-System Oil Dispensers with Flow-Adjustment Valve

A sealed reservoir prevents contamination in dirty and dusty environments. These dispensers have a tube that equalizes system pressure and an integral check valve that prevents backward flow. Mount them to bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

1/2 NPTF Male Outlet
Cap., oz.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation	Max. Temp., °F	Features		Each
16	3 1/2"	8 13/16"	Aluminum	Plastic	Nonvented	160°	Ball Check Valve, Glass Flow Sight	0000000	0000000

Build-Your-Own Multiple-Outlet Oil Dispensers with Flow-Adjustment Valves

Customize these dispensers to serve up to 24 lubrication points from a single location. Dispensers come with two flow-adjustment valves and can accommodate up to 24 valves total. Additional valves are sold separately. Valves thread together to make a sealed connection. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Flip the lever to start and stop flow to all of the valves at once.

		Overall						For Max. Viscosity
Cap.	Bowl Dia.	Ht.	Wd.	Bowl Material	Pressure Regulation	Max. Temp., °F	Mounting Thread Size	ISO Grade	SAE Grade	SSU Grade	AGMA Grade	Features		Each
2 Outlets—For 1/4" Tube OD
16 oz.	3 5/8"	10 1/16"	3 15/16"	Plastic	Vented	225°	5/8"-18	150	90W	700	4	Vented Glass Sight	0000000	000000

Additional Flow-Adjustment Valve

0000000

Each

000000

Multiple-Outlet Oil Dispensers with Flow-Adjustment Valves

2 Outlets

3 Outlets

4 Outlets

6 Outlets

Serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Change the reservoir flow by turning the dial on the bowl. Flip the lever to start and stop flow to all of the valves at once. Dispensers can be used with any oil grade. Flow rate depends on temperature.

		Overall
Cap.	Bowl Dia.	Ht.	Wd.	Housing Material	Bowl Material	Pressure Regulation	Max. Temp., °F	Mounting Thread Size	Features		Each
2 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	10 13/16"	4 3/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	0000000	0000000
3 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	10 13/16"	5"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	0000000	000000
4 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	10 13/16"	5 7/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	0000000	000000
6 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	10 13/16"	7 3/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	0000000	000000

Electrically Operated Oil Dispensers with Flow-Adjustment Valve

A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.

		Overall							120V AC 0.1A Current		24V DC 0.4A Current
Cap.	Bowl Dia.	Ht.	Wd.	Housing Material	Bowl Material	Pressure Regulation	Max. Temp., °F	Mounting Thread Size		Each		Each
For 1/4" Outlet Tube OD
16 oz.	3 1/2"	7 7/8"	5 5/8"	Aluminum	Plastic	Vented	160°	5/8"-18	0000000	0000000	0000000	0000000

24V DC Replacement Coil	0000000	Each	0000000
120V AC Replacement Coil	0000000	Each	00000

Multiple-Outlet Electrically Operated Oil Dispensers with Flow-Adjustment Valves

2 Outlets

3 Outlets

4 Outlets

6 Outlets

Serve multiple lubrication points from a single location. These dispensers have a solenoid that automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. To adjust the flow to individual lubrication points, turn the dial on the corresponding valve. Dispensers can be used with any oil grade. Flow rate depends on temperature.

		Overall
Cap.	Bowl Dia.	Ht.	Wd.	Housing Material	Bowl Material	Pressure Regulation	Max. Temp., °F	Mounting Thread Size	Features	Wire Connection Type	Electrical Connection Type		Each
120V AC 0.1A Current
2 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	4 3/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	0000000
3 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	5"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	000000
4 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	5 7/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	000000
6 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	7 3/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	000000
24V DC 0.4A Current
2 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	4 3/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	000000
3 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	5"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	000000
4 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	5 7/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	000000
6 Outlets—For 1/4" Tube OD
16 oz.	3 1/2"	8 5/16"	7 3/8"	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	Wire Leads	Hardwire	0000000	000000

Replacement Needle Valve	Each	000000
Replacement Coil for 120V AC	Each	00000
Replacement Coil for 24V DC	Each	000000

Oil Dispensers with Flow-Adjustment Valve and Brush

Flip the lever to start and stop the flow of oil through the brush; turn the dial to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.

				Bristle
Cap.	Bowl Dia.	Brush Wd.	Overall Ht.	Ht.	Material	Housing Material	Bowl Material	Pressure Regulation	Max. Temp., °F	Mounting Thread Size	Features		Each
16 oz.	3 1/2"	1 1/2"	11 9/16"	1 5/32"	Nylon Plastic	Aluminum	Plastic	Vented	140°	5/8"-18	Glass Flow Sight	0000000	000000

Replacement Bristle Inserts	0000000	Each	00000
Replacement Brushes	0000000	Each	00000

Electrically Operated Oil Dispensers with Flow-Adjustment Valve and Brush

A solenoid automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust the flow of oil through the brush. Dispensers can be used with any oil grade. Flow rate depends on temperature.

			Overall		Bristle
Cap.	Bowl Dia.	Brush Wd.	Ht.	Wd.	Ht.	Material	Housing Material	Bowl Material	Pressure Regulation	Max. Temp., °F	Mounting Thread Size		Each
120V AC 0.1A Current
16 oz.	3 1/2"	1 1/2"	10 5/16"	5 5/16"	1 5/32"	Nylon Plastic	Aluminum	Plastic	Vented	140°	5/8"-18	0000000	0000000
24V DC 0.4A Current
16 oz.	3 1/2"	1 1/2"	10 5/16"	5 5/16"	1 5/32"	Nylon Plastic	Aluminum	Plastic	Vented	140°	5/8"-18	0000000	000000

Replacement Bristle Inserts	0000000	Each	00000
Replacement Brushes	0000000	Each	00000

Air-Powered Oil-Dispensing Pump Systems

Ready to connect to your air system, these complete systems include a timer and a reservoir. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw. Pumps and their components come mounted on a panel.

Pumps

2 Pumps

					Panel
No. of Pumps	Cap.	Oz. per Cycle	Dispensing Interval	Max. Oil Outlet Pressure, psi	Ht.	Wd.	Reservoir Material	Air Inlet Pressure, psi	For Air Inlet Tube OD	Voltage	Current, A	Temp. Range, °F	For Max. ISO Viscosity Grade		Each
1/8 NPT Female Outlets
2	16 oz.	0-0.007	0.6 sec.-24 hrs.	1,080	10 3/4"	10 7/8"	Plastic	40-120	1/4"	120V AC	0.06	-15° to 180°	220	000000	0000000

Replacement Reservoirs

	Oil Outlet				Overall					Mounting
Cap.	No. of	Thread Type	Pipe Size	Gender	Ht.	Wd.	Dp.	Reservoir Material	Temp. Range, °F	Thread Size		Each
16 oz.	1	NPT	1/8	Female	5 9/16"	3 1/4"	3 1/4"	Plastic	0° to 225°	5/8"-18	0000000	000000

Precision Adjustable-Interval Electric Oil-Dispensing Pumps

With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use retaining ring pliers to turn the flow-adjustment nut. Pumps and their components come mounted on a panel.

Pumps

2 Pumps

					Panel
No. of Pumps	Cap.	Oz. per Cycle	Dispensing Interval	Max. Oil Outlet Pressure, psi	Ht.	Wd.	Reservoir Material	Pump Material	Voltage	Current, A	Temp. Range, °F	For Max. ISO Viscosity Grade		Each
1/8 NPT Female Outlets
2	16 oz.	0-0.005	1 min.-24 hrs.	250	10 3/4"	10 7/8"	Plastic	Aluminum	120V AC	0.06	-15° to 120°	220	000000	0000000

Replacement Reservoirs

	Oil Outlet				Overall					Mounting
Cap.	No. of	Thread Type	Pipe Size	Gender	Ht.	Wd.	Dp.	Reservoir Material	Temp. Range, °F	Thread Size		Each
16 oz.	1	NPT	1/8	Female	5 9/16"	3 1/4"	3 1/4"	Plastic	0° to 225°	5/8"-18	0000000	000000

Electric Melting Pots

Melt coatings, adhesive, wax, tar, and alloys with low melting points. These pots have an internal heating element that ensures fast and even heat transfer. Stir contents periodically to prevent damage to the inside of the pot.

Round with Lid

NEMA 5-15

				O'all
Cap.	Temp. Setting, °F	ID	Inside Ht.	Dia.	Ht.	Material	Wattage, W	Plug Type	NEMA Style	Cord Lg., ft.		Each
120V AC
16 oz.	150° to 550°	4"	3 1/2"	6 3/4"	7 1/2"	Aluminum	240	Three Prong	5-15	6	0000000	0000000