Voltage Voltage |
---|
Light Technology Light Technology |
---|
|
Rated Life Rated Life |
---|
|
Brightness Brightness |
---|
|
Volume Volume |
---|
|
For Resistance For Resistance |
---|
|
More
More
These bulbs are sized to fit older telephone switchboards, signs, instruments, and indicators. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.
LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration.
Incandescent bulbs are traditional light bulbs.
Bulbs for General Electric ET-5 and ET-6 sockets must match the ohms listed on the back of your socket.
Trade No. | Voltage | Wattage | Current | Resistor Included | Light Technology | For General Electric Socket Series | Rated Life, hrs. | Bulb Dia. | O'all Lg. | Choose a Color | Pkg. Qty. | Pkg. | |
Flat Top Bulb (0.28" Base Dia.) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6PSB | 6V AC/6V DC/7V AC/7V DC | 0.21W | 0.03A | __ | LED | __ | 100,000 | 1/4" | 1.07" | 1 | 0000000 | 000000 | |
6PSB | 6V | 0.8W | 0.14A | __ | Incand. | __ | Not Rated | 1/4" | 1.1" | Clear | 5 | 00000000 | 0000 |
12PSB | 12V | 2W | 0.17A | __ | Incand. | __ | Not Rated | 1/4" | 1.1" | Clear | 5 | 00000000 | 0000 |
24E | 24V | 1W | 0.04A | __ | Incand. | __ | Not Rated | 1/4" | 1.69" | Clear | 5 | 00000000 | 00000 |
24E, 24X | 48V DC (900 ohms),130V AC/130V DC (3,200 ohms) | 0.74W | 0.02A | No | LED | ET-5, ET-6 | 100,000 | 1/4" | 1.6" | 1 | 0000000 | 00000 | |
24E1 | 24V | 0.84W | 0.04A | __ | Incand. | __ | Not Rated | 1/4" | 1.69" | Clear | 5 | 00000000 | 00000 |
24PSB | 24V | 1.7W | 0.07A | __ | Incand. | __ | Not Rated | 1/4" | 1.1" | Clear | 5 | 00000000 | 0000 |
24PSB, 28PSB | 24V AC/24V DC/28V AC/28V DC | 0.23W | 0.01A | __ | LED | __ | 30,000 | 1/4" | 1.1" | 1 | 000000 | 0000 | |
24X | 24V | 1W | 0.04A | __ | Incand. | __ | Not Rated | 1/4" | 1.69" | Clear | 5 | 00000000 | 00000 |
28PSB | 28V | 1.1W | 0.04A | __ | Incand. | __ | Not Rated | 1/4" | 1.1" | Clear | 5 | 00000000 | 0000 |
48C2 | 48V | 1.9W | 0.04A | __ | Incand. | __ | Not Rated | 1/4" | 1.69" | Clear | 5 | 00000000 | 0000 |
48PSB | 48V AC/48V DC/52V AC/52V DC | 0.84W | 0.02A | __ | LED | __ | 100,000 | 1/4" | 1.07" | 1 | 0000000 | 00000 | |
48PSB | 48V | 2.4W | 0.05A | __ | Incand. | __ | Not Rated | 1/4" | 1.1" | Clear | 5 | 00000000 | 00000 |
60PSB | 60V | 3W | 0.05A | __ | Incand. | __ | Not Rated | 1/4" | 1.1" | Clear | 5 | 00000000 | 0000 |
120PSB | 120V AC/130V AC | 0.6W | 5mA | __ | LED | __ | 30,000 | 1/4" | 1.1" | 1 | 000000 | 0000 | |
120PSB | 120V | 3W | 0.03A | __ | Incand. | __ | Not Rated | 1/4" | 1.1" | Clear | 10 | 00000000 | 00000 |
Provide a signal you can see and hear. Mount this signal up to 25 ft. away from your phone and it’ll alert you when someone calls with a strobe light and a bell, horn, vibrating chime, or single chime. Choose a tone and program your signal accordingly. Use a telephone cord (sold separately) to connect the signal to your wall jack. If you have a single wall jack, add a splitter with two jacks (sold separately) so you can connect both your phone and the signal. It can also be hardwired to your telephone ringer signal.
Note: For use with one-line analog phones only.
Audible Signal Volume | Knockouts | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bell | Horn | Chime | Ht. | Wd. | Dp. | Material | Light Intensity, candlepower | Environment | Telephone Connection Type | Voltage | Mounting Fasteners Included | No. of | Trade Size | Each | |
104 dB @ 3 ft. | 109 dB @ 3 ft. | 94 dB @ 3 ft. | 5 1/2" | 4 1/8" | 4 3/8" | Plastic | 15 | Outdoor | RJ11 | 120V AC | Yes | 2 | 1/2 | 00000000 | 0000000 |
Jack Splitter | 0000000 | Each | 00000 |