Manufacturer Model Number Manufacturer Model Number |
|---|
Thickness Thickness |
|---|
For Maximum Coating Thickness For MaximumCoating Thickness |
|---|
|
Operating Mechanism Operating Mechanism |
|---|
|
For Use On For Use On |
|---|
|
Electronic Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure the thickness of sheet metal, paper, and other flat stock. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
| 0"-0.47" | 0 mm-12 mm | ±0.00015" | ±0.0038 mm | 0.00005" 0.0001" 0.0005" | 0.001 mm, 0.01 mm | 3/4" | 0.25" | Carbide | Yes | Mitutoyo | 547-400S | 00000000 | 000000 |
Electronic Thickness Gauges for Pipe
and Tubing with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They measure the wall thickness of pipe, tubing, and other curved surfaces. Each has a zero-set button which allows you to start measuring at any point.
547-561S model has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects gauges with SPC data output directly to your PC.
10-pin data cables (sold separately) connect gauges with SPC data output to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from gauges with SPC data output to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Tip Shape | Spindle Tip Shape | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
With SPC Data Output | |||||||||||||||
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 3/4" | 0.14" | Steel | Round | Flat | Yes | Mitutoyo | 547-561S | 00000000 | 0000000 |
Without SPC Data Output | |||||||||||||||
| 0"-1.97" | 0 mm-50 mm | ±0.002" | ±0.040 mm | 0.001" | 0.02 mm | 6 9/16" | 0.12" | Steel | Round | Round | Yes | Mitutoyo | 209-918 | 0000000 | 000000 |
| Lg. | Pkg. Qty. | Includes | (Print) _zPrice sort column | (Print) _zInclude | ||
| USB Data Cable | 80" | __ | __ | __ | __ | 000000 |
| 10-Pin Data Cable | 40" | __ | __ | __ | __ | 00000000 |
| 10-Pin Data Cable | 80" | __ | __ | __ | __ | 00000000 |
| Wireless Data Transmitter | 1 3/4" | __ | __ | __ | __ | 000000 |
| Wireless Data Receiver | 5 1/2" | __ | USB Cable | __ | __ | 000000 |
| Replacement Battery for 547-561S Model | __ | __ | __ | 1 | x | 0000000 |
| Replacement Battery for 209-918 Model | __ | 2 | __ | 1 | x | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing,
and Flat Surfaces with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312S | 00000000 | 0000000 |
Pocket Electronic Thickness
Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Small enough to fit between your thumb and index finger, use it for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Long-Reach Electronic Thickness
Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. An extra-deep throat provides a long reach for measuring sheet metal and other large items. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 0000000 | 0000000 |
Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. A loop handle allows you to comfortably hold them while operating the thumb lever.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326S | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300S | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304S | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301 | 0000000 | 000000 |
Starrett Pocket Dial Thickness
Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They fit between your thumb and index finger for quick thickness checks on paper, film, and other flat stock. Operate by pulling the serrated finger slide to raise the spindle.
Starrett Feeler Gauge Sets with Calibration Certificate
To ensure accurate readings, these sets come with a certificate of calibration traceable to NIST that states they’ve passed a test for accuracy. They are used to check gaps, alignment, and narrow slots. Gauge leaves are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
Tool Steel | ||||||||
| 13 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2" | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467 | 0000000 | 0000000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66 | 0000000 | 00000 |
Starrett Feeler Gauge Sets for Tight
Spots with Calibration Certificate
A certificate of calibration traceable to NIST states that this set has passed a test for accuracy. It's used to check gaps, alignment, and narrow slots. The leaves have narrow ends to measure thickness in areas where standard feeler gauges don’t fit. Set includes leaves in a variety of thicknesses that are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
Tool Steel | ||||||||
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66T | 0000000 | 0000000 |
Starrett Tapered-Thickness Feeler
Gauges with Calibration Certificate
A certificate of calibration traceable to NIST states that this gauge has passed a test for accuracy. Often used to check gaps, alignment, and narrow slots, it tapers in thickness for checking a range of thicknesses.
Thick. Measuring Range | Thick. Measuring Increments | |||||||
|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Lg. | Wd. | Manufacturer Model No. | Each | |
Steel | ||||||||
| 0.010" to 0.150" | 0.300 mm to 4.000mm | 0.001" | 0.05mm | 6 1/4" | 7/16" | 270 | 0000000 | 0000000 |
Digital Coating-Thickness Gauges
with Certificate of Calibration
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure coatings such as paint, galvanizing, plating, and enamel. They display readings in mils and microns; for readings in mils, one mil equals 0.001". All have a wear-resistant ruby probe.
For Coating Thick. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Coating Type | Mil | Microns | Accuracy | Wd. | Ht. | Dp. | Reading Storage Cap. | Batteries Included | Includes | Features | Specifications Met | Each | |
For Use On Aluminum, Copper, Stainless Steel, Steel | |||||||||||||
| Nonmagnetic, Nonconductive | 0-60 | 0-1,500 | +1% | 2 3/8" | 5 3/8" | 1 1/8" | 250 | Yes | __ | Built-In Probe, High/Low Limits | ASTM B499, ASTM D1186, ASTM D1400, ISO 2808 | 0000000 | 000000000 |
| Nonmagnetic, Nonconductive | 0-60 | 0-1,500 | +1% | 2 3/8" | 5 3/8" | 1 1/8" | 250 | Yes | Detachable Probe with 3 ft. Cable | High/Low Limits | ASTM B499, ASTM D1186, ASTM D1400, ISO 2808 | 0000000 | 00000000 |
For Use On Steel | |||||||||||||
| Nonmagnetic | 0-60 | 0-1,500 | +1% | 2 3/8" | 5 3/8" | 1 1/8" | 250 | Yes | __ | Built-In Probe, High/Low Limits | ASTM B499, ASTM D1186, ASTM D1400, ISO 2808 | 0000000 | 000000 |
Coating-Thickness Gauges for Hard-to-Reach Areas
This pen-shaped gauge is good for use on hard-to-reach surfaces. Use it to measure nonmagnetic coatings such as paint, galvanizing, plating, and enamel on steel. This gauge displays readings in mils and microns. For readings in mils, one mil equals 0.001". It comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.
For Coating Thick. | |||||||
|---|---|---|---|---|---|---|---|
| For Coating Type | Mil | Microns | Accuracy | Lg. | Dia. | Each | |
For Use On Steel | |||||||
| Nonmagnetic | 1/4-20 | 5-500 | ±10% | 5 1/2" | 1/4" | 0000000 | 0000000 |