These cable ties come with a material certificate with traceable lot number and product shelf life.

Identify bundles at a glance.

With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

Create custom-length cable ties for large bundles and heavy materials.

These ties meet UL flammability requirements.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Secure and separate parallel bundles with the same tie.

These mounts meet UL flammability requirements.

Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Attach these cable ties directly to a surface—no separate mount needed.

Tighten cable ties and trim the excess with these tools.

Handle high production jobs with minimal effort. Multiple tension settings ensure a precise fit around the bundle.

Keep an assortment of cable ties on hand.

Safety guards on the tip ensure the cable tie is cut without damaging the material.

Secure large bundles such as lumber, cardboard, and wire coils.

Bundle, close, and label bags and sacks.

A hard rubber coating and wire core helps these ties maintain their shape.

Create strong and durable custom-length ties with a hard rubber coating and wire core.

The softest of our twist ties, they have a cushioned outer layer for bundling delicate materials.

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.

Stamp or emboss these ties to identify material.

Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.

Flexible enough for small bundles, these ties are often used for electronics.

These ties meet UL flammability requirements.

Create custom-length ties from a roll with hook on one side and loop on the other.

Attach with a screw or other fastener.

Quickly attach and detach a bundle.

Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.

Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, adjustable.

Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.

Mount to a surface and add a beaded cable tie to secure a bundle.

These stretchy ties conform to irregularly shaped bundles to grip material tightly.

The rubber strap holds bundles tight by conforming to the shape of the material.

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Cut as much strap as you need to hang duct, pipe, and other materials.

A versatile solution for temporary hanging of pipe and tubing at work sites as well as anywhere welding and fastening are not possible. Feed material through the strap, then use the D-rings to adjust the hanging height.

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.

Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.

Clip these saddles around the outside of strut channel for a quick way to route insulated tubing and pipe. Lips on either end of the saddle protect insulation from abrasion if the pipe should move.

Specify a message and starting number.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

Thread the thin wire on these tags through small holes and around oddly shaped items.

Specify a message and starting number.

Specify a message and starting number.

Specify a message and starting number.

Specify a message and starting number.

A metal rim around the tag prevents warping.

Specify a message or design to be printed onto these tags.

These straps have holes on each end to accept a hook.

Strap is wider than cord to distribute pressure across the load.

Also known as bungee cord and shock cord, a fabric cover protects the inner elastic from abrasion.

This cord won't become brittle or hard after exposure to sunlight.

Position these locks anywhere along a length of cord to create stops or separate cord from contact surfaces.

Adjust the location of the hook along the cord.

The thick wire coil on these hooks makes them stronger than standard hooks.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

These tie downs meet D.O.T., California Highway Patrol, and CVSA requirements.

Bolt these tie downs directly to a surface or mount them with a hook, bracket, or cargo track fitting.

Position the ratchet buckle anywhere along the webbing to access the buckle more easily.

With the strength of plastic and the stretch of rubber, these polyurethane rubber tie downs have excellent stretch recovery and won't become brittle.

Shorten the length of the tie downs between the hooks.

Heavy duty hooks and longer-lasting elastic cords make these tie downs stronger than standard abrasion-resistant tie downs.

Also known as tarp straps, these tie downs stand up to wet weather and sunlight.

Able to withstand high temperatures, oil, and most chemicals, these tie downs are appropriate for harsh environments.

These tie downs won't become brittle or hard after exposure to sunlight.

A combination of moisture and chemical resistance makes this hook and loop a good choice for most applications.

Woven from Nomex and flexible stainless steel yarn, this hook and loop withstands temperatures up to 800° F.

Stretch this elastic loop over objects for a secure hold.

A high-tack rubber adhesive on these hook and loop strips sets quickly in moist conditions.

Resistant to water and UV light, this hook and loop stands up to outdoor use.

Cut to wrap around any size bundle.

This hook and loop meets FMVSS 302 and UL 94 V-2 for flame retardance.

When two parallel strips are pressed together, these fasteners are about one-third to one-half the thickness of other snap-together fasteners.

Also known as mastic tape, this tape is thicker than other electrical tape to cushion, insulate, and seal out moisture and environmental contaminants in electrical connections.

In the event of a fire, this rubber tape expands to protect cables from flames and heat.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

Use this rubber tape to splice cable in high-voltage applications.

Insulate wire and cable splices, wrap wire harnesses, and repair cable jacketing with this stretchy tape.

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference).

Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive.

A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.

At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.

A strong, thick layer of Teflon® PTFE makes this tape tougher than standard Low-Friction Tape Made with Teflon® PTFE.

Our most slippery tape, the slick surface allows items to glide smoothly over it.

Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.