These cable ties come with a material certificate with traceable lot number and product shelf life.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

These strong, wide ties are often used as an alternative to metal strapping.

Pull the tab to tear off these cable ties.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.

Protect sensitive electronic equipment from static buildup.

Use the built-in blade to remove excess length once these ties are secure.

These mounts meet UL flammability requirements.

Often used to secure vertical running material, these mounts maintain space between a bundle and a surface.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Tighten cable ties and trim the excess with these tools.

Identify bundles at a glance.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Secure large bundles such as lumber, cardboard, and wire coils.

A hard rubber coating and wire core helps these ties maintain their shape.

These ties have a loop on each end that can be twisted around each other for a secure closure.

Create strong and durable custom-length ties with a hard rubber coating and wire core.

The softest of our twist ties, they have a cushioned outer layer for bundling delicate materials.

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.

Stamp or emboss these ties to identify material.

Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

These ties stretch to hold material tightly without slipping.

These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.

Flexible enough for small bundles, these ties are often used for electronics.

These ties meet UL flammability requirements.

Able to fit small bundles, these thin ties are more flexible than other ties.

Create a cable tie with a buckle—no sewing required.

Stick these ties to any smooth, clean surface.

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

Add a hook and loop cable tie to these mounts to secure a bundle.

The buckle allows you to cinch these ties tight.

Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.

These stretchy ties conform to irregularly shaped bundles to grip material tightly.

Mount to a surface and add a beaded cable tie to secure a bundle.

The hook on these straps quickly connects to the buckle—no need to spend time threading the end through the buckle.

Cut rolls to length and add the no-sew buckle.

Add push-in cable holder to this adapter to mount cable to DIN rail.

These mounts create space between a bundle and surface.

Bend cable around these holders and let tension keep the bundle in place. They are often used on wire harness boards.

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.

Create custom-length seal tags using locks and wire.

These tags are stamped with "SEALED" and a random number.

These tags are stamped with "SEALED" and a random number.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

A fiber grommet provides tear resistance when hanging these tags.

A metal rim around the tag prevents warping.

These tags have perforated green, yellow, and red sections that can be torn off to visually indicate when the status of an item or project changes.

Tags are vinyl. Write on them with a permanent marker.

Log details about routine equipment inspections.

These tags are water resistant and almost impossible to tear. The perforated lower stub has the same number as the top portion so they can be matched.

Sign and date these tags and then seal the laminating flap to protect the text from smudging and wear.

These straps have holes on each end to accept a hook.

Also known as bungee cord and shock cord, a fabric cover protects the inner elastic from abrasion.

This cord won't become brittle or hard after exposure to sunlight.

Adjust the location of the hook along the cord.

Attach these hooks to elastic cord to make a tie down.

Position these locks anywhere along a length of cord to create stops or separate cord from contact surfaces.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

A polyurethane strap on one end stretches and contracts to maintain even tension when loads shift.

A polyurethane strap on one end of these tie downs stretches and contracts to maintain even tension when loads shift.

Use these seatbelt-style straps to secure loads with a click.

With the strength of plastic and the stretch of rubber, these polyurethane rubber tie downs have excellent stretch recovery and won't become brittle.

Shorten the length of the tie downs between the hooks.

Heavy duty hooks and longer-lasting elastic cords make these tie downs stronger than standard abrasion-resistant tie downs.

Shorten the length of the tie downs between the hooks.

Able to withstand high temperatures, oil, and most chemicals, these tie downs are appropriate for harsh environments.

These tie downs won't become brittle or hard after exposure to sunlight.

Tear off 6", 8", or 12" lengths of this hook and loop.

The extra-strong adhesive on the back of this hook and loop sticks where others won't.

These convenient squares and discs have an adhesive backing.

Stretch this elastic loop over objects for a secure hold.

Use the center hole to screw, nail, or rivet these discs to a surface.

A high-tack rubber adhesive on these hook and loop strips sets quickly in moist conditions.

A rigid vinyl backing gives this hook and loop stability.

This hook and loop meets standards for flame retardance.

When two parallel strips are pressed together, these fasteners are about one-third to one-half the thickness of other snap-together fasteners.