We will reply to your message within an hour.
Designed for use in 1/2" dia. through holes.
Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.
Meet U.S. postal service guidelines for mailbox locks.
Made of plastic, these locks are suitable for damp and humid environments.
These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.
These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.
A stainless steel shutter blocks rain, snow, and dirt from entering the cylinder where they can cause internal damage.
Designed for smaller-than-standard-diameter through holes, these locks are often used for securing cabinet doors and filing cabinet drawers.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Install these locks on cabinet doors and file drawers with a smaller-than-standard diameter through hole.
To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.
Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.
These locks open with their own unique key as well as a master key.
These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.
Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.
Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
For protection against dust, dirt, and washdowns, these locks are IP65 rated.
Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.
Designed for use in 1/4" or 1/2" dia. through holes.
These locks require a hex key to open.
Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.
A red indicator on the lock face is visible when unlocked and hidden when locked.
The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
Choose these locks if you need each one to open with a different key.
Open these locks with both a master key and their own unique key.
Fold the ring handle into the recess to stay out of the way when not in use.
With a molded inset grip, the handle remains recessed to stay out of the way.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
Press the button and the handle snaps open; push the handle shut for a secure hold.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Raise the handle and it swings smoothly for easy latching and unlatching.
A master key opens all of these locks, which also have their own unique keys.
The mounting screws on these locks are concealed to prevent tampering.
Open multiple locks with the same key.
Open each of these locks with a different key.
Set a combination and reset it at any time.
Similar to locks on a hotel safe, each user sets a new combination.
Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.
With a flat inset grip, the handle is recessed to stay out of the way.
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
The mounting screws on these latches are concealed to prevent tampering.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
With a finger-grip knob, these latches fit where latches with handles won't.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.
Secure these latches with a padlock.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.
A safety catch prevents accidental opening.
These latches use downward compression to pull surfaces together for sealing gasketed doors.
To prevent accidental opening, these latches have a safety catch.
A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.
These latches are typically used to secure hoods and covers.
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.
Mount these latches on a corner to draw perpendicular surfaces together.
An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.
These latches have a safety catch to prevent accidental opening.
Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.
The latch arm is coated with vinyl so it won't scratch surfaces.
No need for a strike plate, these latches hook into a lip or notch.
These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.
Each latch comes with a variety of strike plates for different mounting options.
Use these L-handle latches to draw lightweight surfaces together.
Draw lightweight surfaces together with these latches.
Lift and turn the handle 180° to open and close these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
Use a 5/16" hex key to open and close these locks.
Open these locks with a slotted screwdriver.
Open these locks with a Torx driver or the included Torx keys.
Open several draw locks with the same key.
Lift and turn the handle 180° to open and close this lock.
Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.
Add a padlock to secure these latches, which reach around corners to pull two surfaces together.
Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.
Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
Adjust the latching distance to compensate for gasketing and misalignment.
Choose these cylinders if you need several cylinders that open with the same key.
Choose these cylinders if you need cylinders that each open with a different key.
Choose these cylinders if you need cylinders that each open with a different key and also open with a master key.
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.
Turn the padlock eye to fasten these hasps without a padlock.
Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.
Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.
Choose this hasp if you need several hasps that open with the same key.
Choose these hasps if you need hasps that each open with a different key.
Choose these locks if you need several that open with the same key.
Add these bars to drawer cabinets without a lock and secure with a padlock.