We will reply to your message within an hour.
More
These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.
Turn sockets from above when there's not room to swing a standard wrench handle.
When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.
Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.
Pivot the head to access fasteners in tight spots.
No need to pull the socket off the tool—push a button to release.
Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Turn the end of the handle to set torque, and the wrench makes an audible click when it reaches the setting.
When the set torque is reached, these wrenches slip to disengage and stop overtightening.