These inserts allow you to connect a drawbar coupler to a hitch receiver on a vehicle for towing. Fit them into a receiver and mount a coupler to the mounting plate. The more mounting holes a plate has, the more you can adjust the position of the coupler to match the height of your trailer.

Powder-coated inserts are more corrosion resistant than painted inserts.

Maximum trailer weight is the total weight being towed. Vertical capacity (also known as tongue weight) represents the weight of the load on the drawbar ring.

These pins secure an insert to a receiver on a vehicle as part of a connection for towing.

Stainless steel pins resist corrosion better in outdoor environments than steel pins.

Toggle hitch pins don’t require a cotter pin. Instead, the toggle swivels out of the way to insert them and then swivels back to secure them.

Hitch pins with an adapter sleeve are compatible with three receiver sizes, so they’re handy if you have vehicles with different hitch sizes.

Stabilize your hitch for safe, quiet towing—these clamps strengthen the joint between the hitch insert and receiver to prevent rattling and swaying. Slide the U-bolt over the hitch insert and attach the mounting plate to the bottom using the included nuts. Tighten until the mounting plate presses firmly against the hitch insert and receiver.

For technical drawings and 3-D models, click on a part number.

Everything you need to attach a hitch to your vehicle's receiver—these kits include a hitch insert, ball, and pin. To match the height of your trailer, you can flip them over to raise or drop the ball. The ball in these kits connects with hitch-ball couplers on trailers. Maximum trailer weight is the total weight being towed. Vertical capacity (also known as tongue weight) is the weight of the load on the hitch ball.

Kits with a locking hitch pin prevent your hitch from getting stolen—you can't pull the hitch insert out without the key. A dust cap keeps debris out of the locking mechanism.

Use these kingpins as the primary connection and pivot point between your semi-trailer and semi-tractor. They help the trailer turn and move with the tractor to remain stable and balanced during towing. Made of 8630 alloy steel, these kingpins are strong and hard. Plus, the addition of chromium in the steel protects them from corrosion in wet conditions. Install them on the underside of your trailer.

For technical drawings and 3-D models, click on a part number.

Modify your forklift to tow machines, trailers, and disabled vehicles. These adapters have a hitch receiver that works with hitch inserts, mounting plate inserts, drawbar couplers, and other towing connectors. Lock adapters in place with a connecting pin behind each fork, then wrap the chain around your carriage.

Add bumper inserts to these adapters to push equipment instead of pulling it. The bumper is rubber, so it won’t scratch surfaces.

For technical drawings and 3-D models, click on a part number.

Secure trailers to vehicles by locking the hitch pin into the receiver—you can't disconnect the trailer without the key. Use them to prevent someone from stealing your trailer or moving it. Built to stand up to any weather, they're great for outdoor trailers. The lock body rotates around your hitch pin, so you can easily reach the key into the cylinder to unlock. A plastic cover protects the key cylinder from water and debris, so it won’t freeze, corrode, or jam.

Style A lock from the side of your vehicle—access to the key cylinder is perpendicular to the hitch. These locks do not include a hole for a cotter pin. Made of steel, they’re stronger than stainless steel locks. Chrome plating adds corrosion resistance. The included cover is a separate piece.

Style B lock from behind your vehicle—access to the key cylinder is parallel to the hitch. Made of stainless steel, they resist corrosion better than steel locks. The included cover is connected to the lock.

Locks for 1 1/4" hitch receivers fit class I and II hitches. Locks for 2" square hitch receivers fit class III and IV hitches. Locks for 2 1/2" square hitch receivers fit class III-V hitches.

Choose keyed alike locks if you need several locks that open with the same key. Choose keyed differently locks if you need locks that each open with a different key.