McMaster-Carr logo
    Filter by
    Grip Style
    Number of Pieces
    System of Measurement
    Power Source
    Handle Material
    Number of Sizes
    Shaft Material
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    93 Products

    Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Screwdriver Sets, Ultra Grip.

    Ultra Grip

    Keep a selection of screwdrivers on hand to turn fasteners of any size
    Steel—Best for dry environments, since moisture will cause it to rust.
    Phosphate-Coated Steel—The dark, matte coating resists rust in most wet and outdoor applications. However, it won't hold up to salt water and chemicals.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Corrosion-Resistant Stainless Steel—With solid stainless steel construction, these screwdrivers have no coating that could flake off and damage the screw drive. They resist salt water and chemicals better than steel screwdrivers, but are not quite as strong.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Grip
    Style
    Container
    Type
    Each
    Hex
    60.050" Hex Screwdriver—4 13/16" O'all Lg.
    1/16" Hex Screwdriver—5" O'all Lg.
    5/64" Hex Screwdriver—5" O'all Lg.
    3/32" Hex Screwdriver—6 1/4" O'all Lg.
    1/8" Hex Screwdriver—6 1/2" O'all Lg.
    5/32" Hex Screwdriver—8" O'all Lg.    		Phosphate-Coated SteelUltra GripPlastic Pouch0000000000000
    81.27 mm Hex Screwdriver—6 5/8" O'all Lg.
    1.5 mm Hex Screwdriver—6 5/8" O'all Lg.
    2 mm Hex Screwdriver—6 5/8" O'all Lg.
    2.5 mm Hex Screwdriver—7 1/8" O'all Lg.
    3 mm Hex Screwdriver—7 1/8" O'all Lg.
    4 mm Hex Screwdriver—7 1/8" O'all Lg.
    5 mm Hex Screwdriver—7 1/8" O'all Lg.
    6 mm Hex Screwdriver—7 1/8" O'all Lg.    		Phosphate-Coated SteelUltra GripPlastic Pouch0000000000000
    110.050" Hex Screwdriver—4 1/8" O'all Lg.
    1/16" Hex Screwdriver—4 3/4" O'all Lg.
    5/64" Hex Screwdriver—4 7/8" O'all Lg.
    3/32" Hex Screwdriver—5 1/4" O'all Lg.
    7/64" Hex Screwdriver—5 3/8" O'all Lg.
    1/8" Hex Screwdriver—6 5/8" O'all Lg.
    9/64" Hex Screwdriver—6 3/4" O'all Lg.
    5/32" Hex Screwdriver—8" O'all Lg.
    3/16" Hex Screwdriver—8 1/4" O'all Lg.
    7/32" Hex Screwdriver—9 1/4" O'all Lg.
    1/4" Hex Screwdriver—9 1/2" O'all Lg.    		Phosphate-Coated SteelUltra GripPlastic Pouch000000000000
     
    Tamper-Resistant Torx
    6T10 Tamper-Resistant Torx Screwdriver—6 1/2" O'all Lg.
    T15 Tamper-Resistant Torx Screwdriver—7" O'all Lg.
    T20 Tamper-Resistant Torx Screwdriver—7 3/4" O'all Lg.
    T25 Tamper-Resistant Torx Screwdriver—8" O'all Lg.
    T30 Tamper-Resistant Torx Screwdriver—8 3/4" O'all Lg.
    T40 Tamper-Resistant Torx Screwdriver—9 3/4" O'all Lg.    		SteelUltra GripPlastic Rack0000000000000
     
    Torx Plus
    7IP8 Torx Plus Screwdriver—6 3/4" O'all Lg.
    IP10 Torx Plus Screwdriver—7 1/2" O'all Lg.
    IP15 Torx Plus Screwdriver—7 1/2" O'all Lg.
    IP20 Torx Plus Screwdriver—8 1/4" O'all Lg.
    IP25 Torx Plus Screwdriver—8 1/4" O'all Lg.
    IP30 Torx Plus Screwdriver—9 1/4" O'all Lg.
    IP40 Torx Plus Screwdriver—10" O'all Lg.    		Chrome-Plated SteelUltra Grip—000000000000
     
    Square
    4No. 0 Square Screwdriver—7 1/2" O'all Lg.
    No. 1 Square Screwdriver—8 1/4" O'all Lg.
    No. 2 Square Screwdriver—10 1/2" O'all Lg.
    No. 3 Square Screwdriver—10 1/2" O'all Lg.    		Chrome-Plated SteelUltra Grip—000000000000
     
    JIS
    3No. 1 JIS Screwdriver—7 5/16" O'all Lg.
    No. 2 JIS Screwdriver—8 1/4" O'all Lg.
    No. 3 JIS Screwdriver—11" O'all Lg.    		Chrome-Plated SteelUltra Grip—0000000000000
     
    Phillips and Slotted
    61/8" Slotted Screwdriver—6 3/8" O'all Lg.
    5/32" Slotted Screwdriver—8" O'all Lg.
    7/32" Slotted Screwdriver—8 3/4" O'all Lg.
    1/4" Slotted Screwdriver—10" O'all Lg.
    No. 1 Phillips Screwdriver—7" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/4" O'all Lg.    		Stainless SteelUltra Grip—0000000000000
    83/16" Slotted Screwdriver—7 3/4" O'all Lg.
    1/4" Slotted Screwdriver - 3 1/4" O'all Lg.
    1/4" Slotted Screwdriver—8 1/4" O'all Lg.
    5/16" Slotted Screwdriver - 10 9/16" O'all Lg.
    3/8" Slotted Screwdriver - 12 9/16" O'all Lg.
    No. 1 Phillips Screwdriver—5 11/16" O'all Lg.
    No. 2 Phillips Screwdriver—3 7/8" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/4" O'all Lg.    		Chrome-Plated SteelUltra Grip—000000000000
     
    Phillips, Slotted, and Torx
    123/16" Slotted Screwdriver—3 7/8" O'all Lg.
    3/16" Slotted Screwdriver—7 3/4" O'all Lg.
    1/4" Slotted Screwdriver—10 9/16" O'all Lg.
    1/4" Slotted Screwdriver—3 7/8" O'all Lg.
    1/4" Slotted Screwdriver—8 1/4" O'all Lg.
    5/16" Slotted Screwdriver—10 9/16" O'all Lg.
    No. 1 Phillips Screwdriver—5 11/16" O'all Lg.
    No. 2 Phillips Screwdriver—3 7/8" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/4" O'all Lg.
    No. 3 Phillips Screwdriver—10 9/16" O'all Lg.
    T15 Torx Screwdriver—7 3/4" O'all Lg.
    T25 Torx Screwdriver—8 1/4" O'all Lg.    		Chrome-Plated SteelUltra Grip—0000000000000
     

    Strikable Screwdrivers Sets

    Image of Product. Front orientation. Screwdrivers. Strikable Screwdrivers Sets, Ultra Grip.
    Image of Product. Rough Grip Texture. Front orientation. Screwdrivers. Strikable Screwdrivers Sets, Rough Grip Texture, Ultra Grip.

    Ultra Grip

    Rough Grip Texture

    Loosen stripped screws and pry off boards with these heavy duty screwdriver sets. The metal strike cap on the handle absorbs hard blows with a hammer. The shaft extends all the way through the handle, so it won't snap off as you chip away.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Rough Grip Texture—Get the best possible grip, even with wet or oily fingers.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Grip Texture
    Grip
    Style
    Container
    Type
    Each
    Phillips and Slotted
    57/32" Slotted Screwdriver—8 1/2" O'all Lg.
    1/4" Slotted Screwdriver—9 1/2" O'all Lg.
    5/16" Slotted Screwdriver—10 3/4" O'all Lg.
    No. 1 Phillips Screwdriver—7 5/16" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/2" O'all Lg.    		Chrome-Plated SteelRough Grip TextureUltra Grip—00000000000000
    69/64" Slotted Screwdriver—6 3/8" O'all Lg.
    3/16" Slotted Screwdriver—7 7/16" O'all Lg.
    7/32" Slotted Screwdriver—8 1/4" O'all Lg.
    9/32" Slotted Screwdriver—9" O'all Lg.
    No. 1 Phillips Screwdriver—7" O'all Lg.
    No. 2 Phillips Screwdriver—8" O'all Lg.    		Chrome-Plated Steel—Ultra GripPlastic Rack000000000000
     

    Electrically Insulating Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Electrically Insulating Screwdriver Sets.
    Prevent a dangerous zap if you accidentally touch a live circuit. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet ASTM, EN, or IEC standards. Use these screwdriver sets for everything from installing electrical panels to repairing outlets, switches, and light fixtures.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Grip
    Style
    Specs. Met
    Each
    Phillips
    5No. 0 Phillips Screwdriver—6 3/8" O'all Lg.
    No. 1 Phillips Screwdriver—7" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/4" O'all Lg.
    No. 3 Phillips Screwdriver—10 1/4" O'all Lg.
    No. 4 Phillips Screwdriver—12 1/4" O'all Lg.    		Plastic-Coated SteelUltra GripEN 609000000000000000
     
    Slotted
    53/32" Slotted Screwdriver—6 3/8" O'all Lg.
    5/32" Slotted Screwdriver—7 13/16" O'all Lg.
    7/32" Slotted Screwdriver—8 3/4" O'all Lg.
    1/4" Slotted Screwdriver—10" O'all Lg.
    5/16" Slotted Screwdriver—11 1/4" O'all Lg.    		Plastic-Coated SteelUltra GripEN 60900000000000000
     
    Torx
    6T8 Torx Screwdriver—6 1/2" O'all Lg.
    T9 Torx Screwdriver—6 1/2" O'all Lg.
    T10 Torx Screwdriver—6 1/2" O'all Lg.
    T15 Torx Screwdriver—7 1/2" O'all Lg.
    T20 Torx Screwdriver—7 1/2" O'all Lg.
    T25 Torx Screwdriver—7 13/16" O'all Lg.    		Plastic-Coated SteelUltra GripIEC 60900, EN 60900, ASTM F15050000000000000
     
    Pozidriv® Terminal Screw
    2No. 1 Pozidriv® Terminal Screw Screwdriver—7 3/8" O'all Lg.
    No. 2 Pozidriv® Terminal Screw Screwdriver—8 3/4" O'all Lg.    		Plastic-Coated SteelUltra GripIEC 60900000000000000
     
    Phillips and Slotted
    53/32" Slotted Screwdriver—6 5/16" O'all Lg.
    7/32" Slotted Screwdriver—8 3/4" O'all Lg.
    1/4" Slotted Screwdriver—10" O'all Lg.
    No. 1 Phillips Screwdriver—8 1/4" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/4" O'all Lg.    		Plastic-Coated SteelUltra GripEN 60900000000000000
     
    Phillips, Slotted, and Square
    75/32" Slotted Screwdriver—8 1/4" O'all Lg.
    7/32" Slotted Screwdriver—9 1/2" O'all Lg.
    1/4" Slotted Screwdriver—10 3/4" O'all Lg.
    Insulated Voltage Tester (Use to Check Maximum 250 Volts)
    No. 1 Phillips Screwdriver—7 1/2" O'all Lg.
    No. 2 Phillips Screwdriver—8 3/4" O'all Lg.
    No. 2 Square Screwdriver—10 1/2" O'all Lg.    		Plastic-Coated SteelUltra GripEN 609000000000000000
     

    Sure-Grip Tip Screwdriver Sets

    Image of Product. Ultra Grip. Front orientation. Screwdrivers. Sure-Grip Tip Screwdriver Sets, Grooved Tip, Ultra Grip.
    Image of Product. Grooved Tip. Front orientation. Screwdrivers. Sure-Grip Tip Screwdriver Sets, Grooved Tip, Ultra Grip.

    Ultra Grip

    Grooved

    Tip

    No slipping, no stripping—these screwdrivers have a specially designed tip that sits snugly in the screw slot for maximum torque.
    Grooved Tip—Grips the screw slot for a firm hold.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Tip
    Style
    Grip
    Style
    Container
    Type
    Each
    Phillips and Slotted
    69/64" Slotted Screwdriver—6 3/16" O'all Lg.
    5/32" Slotted Screwdriver—6 3/4" O'all Lg.
    7/32" Slotted Screwdriver—7 13/16" O'all Lg.
    1/4" Slotted Screwdriver—9" O'all Lg.
    No. 1 Phillips Screwdriver—7" O'all Lg.
    No. 2 Phillips Screwdriver—8" O'all Lg.    		Chrome-Plated SteelGroovedUltra GripPlastic Rack0000000000000
     

    Electrically Insulating Changeable-Shaft Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Electrically Insulating Changeable-Shaft Screwdriver Sets.
    Switch between a variety of screws and prevent electric shock. These sets include an insulated handle and interchangeable shafts that absorb up to 1,000 volts to meet IEC standards. Skip lugging around bulky screwdriver sets and simply remove and replace the shaft to fasten multiple screw sizes and styles.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Components Included
    Sizes Included
    Overall
    Lg.
    Grip
    Style
    Specs.
    Met
    Each
    Plastic-Coated Steel
    172 Screwdriver Handles
    15 Shafts    		Phillips: No. 1, No. 2
    Pozidriv® Terminal Screw: No. 1, No. 2
    Pozidriv®: No. 1, No. 2
    Slotted: 0.098", 0.138", 0.157", 0.216", 1/4"
    Torx: T10, T15, T20, T25    		8"Ultra GripIEC 6090000000000000000
     

    Static-Control Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Static-Control Screwdriver Sets.
    Protect circuit boards and other sensitive electronics from harmful static shocks. Also known as ESD-safe screwdrivers, these sets meet IEC requirements to drain static away from your workpiece before it causes damage.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Grip
    Style
    Static Control
    Rating
    Surface Resistivity
    Specs. Met
    Each
    Phillips and Slotted
    61/8" Slotted Screwdriver—8" O'all Lg.
    5/32" Slotted Screwdriver—8 1/4" O'all Lg.
    7/32" Slotted Screwdriver—9 1/4" O'all Lg.
    No. 0 Phillips Screwdriver—6 1/2" O'all Lg.
    No. 1 Phillips Screwdriver—7 1/2" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/2" O'all Lg.    		Chrome-Plated SteelUltra GripStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-100000000000000
     

    Ratcheting Bit Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Ratcheting Bit Screwdrivers, Style B.

    Style B

    Drive multiple screw styles and sizes without lifting and repositioning your tool. A ratcheting handle drives screws with smooth, continuous motion to save time with every turn. Just snap one of the included bits onto the shaft and get cranking.
    Style B—Bits store neatly inside the handle so you won't lose them.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    Shaft
    Bit
    Style
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding
    Mechanism
    Grip
    Style
    Each
    B10Phillips: No. 1, No. 2
    Pozidriv®: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Square: No. 1, No. 2
    Torx: T10, T15    		1/4"10"Chrome-Plated Steel3"3/8"SteelMagnetUltra Grip0000000000000

    Quick-Drive Ratcheting Bit Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Quick-Drive Ratcheting Bit Screwdrivers.
    Drive screws four times faster than with other ratcheting tools. Grip the gear shift with one hand and turn the handle with the other to spin screws at record speed. Release the gear shift to revert back to a slower speed for more torque. These screwdrivers come with interchangeable bits, so you can drive a variety of screws with a single tool. Bits store neatly inside the handle when not in use.
    Corrosion-Resistant Stainless Steel—With solid stainless steel construction, these screwdrivers have no coating that could flake off and damage the screw drive. They resist salt water and chemicals better than steel screwdrivers, but are not quite as strong.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding
    Mechanism
    Grip
    Style
    Each
    4Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"    		1/4"9 1/4"Stainless Steel2 7/8"3/8"SteelMagnetUltra Grip0000000000000

    Strong-Hold Bit Screwdrivers

    Image of Product. Front orientation. Contains Inset. Screwdrivers. Strong-Hold Bit Screwdrivers.
    When locked into the chuck, these bits won't budge. Use these screwdrivers for high-torque applications, such as driving long screws into dense material.
    Pull back the chuck to insert a bit in the magnetic holder; push it forward to lock it in place. Bits store neatly inside the handle so you won't lose them.
    Steel—Best for dry environments, since moisture will cause it to rust.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding Mechanism
    Grip
    Style
    Container
    Type
    Each
    6Phillips: No. 1, No. 2, No. 3
    Slotted: 3/16", 7/32", 1/4"    		1/4"8"Steel3 1/4"5/8"SteelQuick-Change ChuckUltra GripFabric Case0000000000000

    Reversible-Bit Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdriver/Nutdrivers. Reversible-Bit Screwdriver/Nutdrivers, Ultra Grip, 6 Sizes.
    Image of Product. Front orientation. Screwdriver/Nutdrivers. Reversible-Bit Screwdriver/Nutdrivers, Ultra Grip, 10 Sizes.

    Ultra Grip

    6 Sizes

    Ultra Grip

    10 Sizes

    Image of Specification. External Hex. Front orientation. Contains Annotated. For External Hex Drives.
    Image of Specification. Phillips. Front orientation. For Phillips Drives.
    Image of Specification. Slotted. Front orientation. For Slotted Drives.
    Image of Specification. Square. Front orientation. For Square Drives.
    Image of Specification. Torx. Front orientation. For Torx Drives.

    External

    Hex

    Phillips

    Slotted

    Square

    Torx

    Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.
    Ultra Grip—Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque.
    6 Sizes—For those with six sizes, bits turn four screw sizes and the shaft two external hex sizes.
    Voltage Detector—Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft two external hex sizes.
    Shaft
    Material
    For Bit Hex
    Shank Size
    No. of
    Sizes
    Sizes Included
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Bit-Holding
    Mechanism
    Shaft
    Bit
    Handle
    Certification
    Features
    For Drive Style
    Each
    Ultra Grip
    1/4", 5/16"6Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    External Hex: 1/4", 5/16"    		7 3/4"2 1/4"7/16"Ball DetentChrome-Plated SteelSteelPlastic—Bit storage inside shaftExternal Hex, Phillips, Slotted
    		000000000000
    1/4", 5/16"10Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Torx: T10, T15
    Square: No. 1, No. 2
    External Hex: 1/4", 5/16"    		9"3 3/8"1 1/4"Ball DetentPlastic-Coated SteelSteelPlasticC-UL Listed, UL Listed
    		Bit storage inside shaft, Bit storage inside tool, Voltage DetectorExternal Hex, Phillips, Slotted, Square, Torx
    		000000000000
     

    Electrically Insulating Bit Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Electrically Insulating Bit Screwdrivers.
    If you accidentally touch a live circuit, these bit screwdrivers prevent a dangerous zap. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet EN and IEC standards. Use these screwdrivers for everything from installing electrical panels to repairing outlets, switches, and light fixtures. Change the bit to drive a variety of screws with a single tool.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding
    Mechanism
    Grip
    Style
    Specs. Met
    Each
    13Phillips: No. 0, No. 1, No. 2, No. 3
    Slotted: 5/32", 7/32", 1/4"
    Square: No. 1, No. 2, No. 3
    Torx: T15, T20, T25    		1/4"9 1/8"Plastic-Coated Steel3 3/8"0.48"SteelMagnetUltra GripIEC 60900, EN 609000000000000000

    Swivel-Head Ratchet Wrench/Screwdrivers

    Image of Product. Front orientation. Ratchet Wrench/Screwdrivers. Swivel-Head Ratchet Wrench/Screwdrivers.
    Image of Attribute. Front orientation.

    Tighten or loosen fasteners with a socket or bit—these tools have a magnet for attaching both. Pivot the head freely to drive fasteners at odd angles. Or, slide the switch to lock the head in place at set increments. When you don’t need a lot of torque to tighten your fastener, twist these tools as you would a screwdriver. A ratcheting mechanism lets you turn fasteners without removing or repositioning.
    Head
    Grip
    For Bit Hex
    Shank Size
    No. of
    Sizes
    Sizes Included
    Bit-Holding
    Mechanism
    Overall
    Lg.
    Turn Req.
    to Ratchet
    Shape
    Range of
    Motion
    Angle
    Material
    Style
    Material
    Features
    Each
    3/8" Square Drive
    1/4"13External Hex: 1/4"
    Hex: 1/8", 5/32", 3/16", 1/4"
    Phillips: No. 1, No. 2
    Square: No. 1, No. 2
    Torx: T10, T15, T20, T25    		Magnet5 1/4"5°Round180°0°, 15°, 90°, 165°, 180°Black-Oxide SteelUltra GripRubber
    		Pop-up bit storage inside tool00000000000000
     

    Ball-Tip Screwdriver Sets

    Image of ProductInUse. Front orientation. Contains Annotated. Ball-Tip Screwdriver Sets.
    Image of Product. Front orientation. Screwdrivers. Ball-Tip Screwdriver Sets.
    Turn a variety of screws at an angle when you can't access them head on. These assorted screwdrivers have a ball tip that engages the drive with less contact than a straight tip. They're handy for reaching screws in corners and underneath machinery. However, ball tips don't grip as tightly as straight tips and may strip threads if you crank them too hard.
    Phosphate-Coated Steel—The dark, matte coating resists rust in most wet and outdoor applications. However, it won't hold up to salt water and chemicals.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Max. Access
    Angle
    Grip
    Style
    Container
    Type
    Each
    Hex
    71.5 mm Hex Screwdriver—4 3/4" O'all Lg.
    2 mm Hex Screwdriver—5" O'all Lg.
    2.5 mm Hex Screwdriver—5 1/8" O'all Lg.
    3 mm Hex Screwdriver—6 3/4" O'all Lg.
    4 mm Hex Screwdriver—8 1/4" O'all Lg.
    5 mm Hex Screwdriver—8 3/4" O'all Lg.
    6 mm Hex Screwdriver—10 1/4" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch0000000000000
    75/64" Hex Screwdriver—4 13/16" O'all Lg.
    3/32" Hex Screwdriver—5 1/4" O'all Lg.
    7/64" Hex Screwdriver—5 5/16" O'all Lg.
    1/8" Hex Screwdriver—6 5/8" O'all Lg.
    9/64" Hex Screwdriver—6 13/16" O'all Lg.
    5/32" Hex Screwdriver—7 15/16" O'all Lg.
    3/16" Hex Screwdriver—8" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
    80.050" Hex Screwdriver—4 1/8" O'all Lg.
    1/16" Hex Screwdriver—4 3/4" O'all Lg.
    5/64" Hex Screwdriver—4 13/16" O'all Lg.
    3/32" Hex Screwdriver—5 1/4" O'all Lg.
    7/64" Hex Screwdriver—5 5/16" O'all Lg.
    1/8" Hex Screwdriver—6 5/8" O'all Lg.
    9/64" Hex Screwdriver—6 13/16" O'all Lg.
    5/32" Hex Screwdriver—7 15/16" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
    87/64" Hex Screwdriver—5 5/16" O'all Lg.
    1/8" Hex Screwdriver—6 5/8" O'all Lg.
    9/64" Hex Screwdriver—6 13/16" O'all Lg.
    5/32" Hex Screwdriver—7 15/16" O'all Lg.
    3/16" Hex Screwdriver—8" O'all Lg.
    7/32" Hex Screwdriver—9" O'all Lg.
    1/4" Hex Screwdriver—9 3/4" O'all Lg.
    5/16" Hex Screwdriver—10 1/2" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
    82 mm Hex Screwdriver—6 1/4" O'all Lg.
    2.5 mm Hex Screwdriver—6 3/4" O'all Lg.
    3 mm Hex Screwdriver—9 3/4" O'all Lg.
    4 mm Hex Screwdriver—11 1/2" O'all Lg.
    5 mm Hex Screwdriver—12 1/4" O'all Lg.
    6 mm Hex Screwdriver—13 1/2" O'all Lg.
    8 mm Hex Screwdriver—14 1/4" O'all Lg.
    10 mm Hex Screwdriver—15" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
    91.5 mm Hex Screwdriver—4 3/4" O'all Lg.
    2 mm Hex Screwdriver—5" O'all Lg.
    2.5 mm Hex Screwdriver—5 1/8" O'all Lg.
    3 mm Hex Screwdriver—6 3/4" O'all Lg.
    4 mm Hex Screwdriver—8 1/4" O'all Lg.
    5 mm Hex Screwdriver—8 3/4" O'all Lg.
    6 mm Hex Screwdriver—10 1/4" O'all Lg.
    8 mm Hex Screwdriver—11 1/4" O'all Lg.
    10 mm Hex Screwdriver—12 1/4" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
    115/64" Hex Screwdriver—4 13/16" O'all Lg.
    3/32" Hex Screwdriver—5 1/4" O'all Lg.
    7/64" Hex Screwdriver—5 5/16" O'all Lg.
    1/8" Hex Screwdriver—6 5/8" O'all Lg.
    9/64" Hex Screwdriver—6 13/16" O'all Lg.
    5/32" Hex Screwdriver—7 15/16" O'all Lg.
    3/16" Hex Screwdriver—8" O'all Lg.
    7/32" Hex Screwdriver—9" O'all Lg.
    1/4" Hex Screwdriver—9 3/4" O'all Lg.
    5/16" Hex Screwdriver—10 1/2" O'all Lg.
    3/8" Hex Screwdriver—11 1/4" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
    115/64" Hex Screwdriver—6 1/2" O'all Lg.
    3/32" Hex Screwdriver—7 1/4" O'all Lg.
    7/64" Hex Screwdriver—8 1/2" O'all Lg.
    1/8" Hex Screwdriver—10" O'all Lg.
    9/64" Hex Screwdriver—10 1/2" O'all Lg.
    5/32" Hex Screwdriver—11 3/4" O'all Lg.
    3/16" Hex Screwdriver—12 1/4" O'all Lg.
    7/32" Hex Screwdriver—13 1/4" O'all Lg.
    1/4" Hex Screwdriver—13 3/4" O'all Lg.
    5/16" Hex Screwdriver—14 1/4" O'all Lg.
    3/8" Hex Screwdriver—14 3/4" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
    130.050" Hex Screwdriver—4 1/8" O'all Lg.
    1/16" Hex Screwdriver—4 3/4" O'all Lg.
    5/64" Hex Screwdriver—4 13/16" O'all Lg.
    3/32" Hex Screwdriver—5 1/4" O'all Lg.
    7/64" Hex Screwdriver—5 5/16" O'all Lg.
    1/8" Hex Screwdriver—6 5/8" O'all Lg.
    9/64" Hex Screwdriver—6 13/16" O'all Lg.
    5/32" Hex Screwdriver—7 15/16" O'all Lg.
    3/16" Hex Screwdriver—8" O'all Lg.
    7/32" Hex Screwdriver—9" O'all Lg.
    1/4" Hex Screwdriver—9 3/4" O'all Lg.
    5/16" Hex Screwdriver—10 1/2" O'all Lg.
    3/8" Hex Screwdriver—11 1/4" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch000000000000
     
    Torx
    8T9 Torx Screwdriver—5" O'all Lg.
    T10 Torx Screwdriver—5 1/4" O'all Lg.
    T15 Torx Screwdriver—6 7/16" O'all Lg.
    T20 Torx Screwdriver—7 1/2" O'all Lg.
    T25 Torx Screwdriver—7 3/4" O'all Lg.
    T27 Torx Screwdriver—8 3/4" O'all Lg.
    T30 Torx Screwdriver—9" O'all Lg.
    T40 Torx Screwdriver—9 1/2" O'all Lg.    		Phosphate-Coated Steel20°Ultra GripPlastic Pouch0000000000000
     
    Square
    4No. 0 Square Screwdriver—7" O'all Lg.
    No. 1 Square Screwdriver—7 1/4" O'all Lg.
    No. 2 Square Screwdriver—8 1/4" O'all Lg.
    No. 3 Square Screwdriver—8 1/4" O'all Lg.    		Phosphate-Coated Steel25°Ultra GripPlastic Pouch0000000000000
     

    Tight-Clearance Bit Screwdrivers with Offset Tip

    Image of Product. Front orientation. Screwdrivers. Tight-Clearance Bit Screwdrivers with Offset Tip.
    Fasten multiple screw sizes and styles in spots with low overhead clearance. The offset head reaches into engine compartments and other spaces where there isn't room to turn a standard driver. Snap one of the included bits onto the shaft and stow the others in the handle so you won't lose them.
    Steel—Best for dry environments, since moisture will cause it to rust.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Offset
    Angle
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding
    Mechanism
    Grip
    Style
    Each
    4Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"    		1/4"10"105°Steel4 3/4"1"SteelMagnetUltra Grip0000000000000

    Bit Screwdrivers

    Image of Product. Ultra Grip. Front orientation. Screwdrivers. Bit Screwdrivers, Magnet Bit Holder, Ultra Grip.

    Ultra Grip

    Don't lug around a toolbox full of drivers—just swap out the bit to drive multiple screw sizes and styles with one tool. The ultimate space savers, these bit screwdrivers are a smart solution for on-the-go jobs.
    Steel—Best for dry environments, since moisture will cause it to rust.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding
    Mechanism
    Grip
    Style
    Each
    26Phillips: No. 0, No. 1, No. 2, No. 3
    Pozidriv®: No. 1, No. 2
    Slotted: 3 mm, 4 mm, 4.5 mm, 5.5 mm, 6 mm, 6.5 mm
    Square: No. 0, No. 1, No. 2, No. 3
    Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30    		1/4"9"Steel3 1/2"3/8"SteelMagnetUltra Grip0000000000000

    Screw-Holding Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Screw-Holding Screwdriver Sets.
    Image of Product. With Retaining Ring. Front orientation. Screwdrivers. Screw-Holding Screwdriver Sets.

    With

    Retaining

    Ring

    When you've only got one free hand to fasten, reach for these screwdrivers. A retaining ring on the tip grips screws securely so they won't fall off as you tighten. These sets are useful when working above crevices that screws could slip into.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Screw-Holding
    Mechanism
    Grip
    Style
    Each
    Torx
    6T8 Torx Screwdriver—6 1/2" O'all Lg.
    T10 Torx Screwdriver—7 1/2" O'all Lg.
    T15 Torx Screwdriver—7 1/2" O'all Lg.
    T20 Torx Screwdriver—8 1/4" O'all Lg.
    T25 Torx Screwdriver—8 1/4" O'all Lg.
    T30 Torx Screwdriver—9 1/4" O'all Lg.    		Chrome-Plated SteelRetaining RingUltra Grip0000000000000
     

    Changeable-Shaft Torque Screwdriver Sets

    Image of Product. Front orientation. Torque Screwdrivers. Changeable-Shaft Torque Screwdriver Sets .
    Image of Attribute. Front orientation. Changeable-Shaft Torque Screwdriver Sets .

    Set includes a handle, six shafts, and an adjustment tool. Remove and replace the shaft to use a different size or drive style. To adjust torque, insert the adjustment tool into the handle and turn to the desired setting. When set torque is reached, the driver signals with an audible click. The handle has a contoured ultra grip for comfort. Sets come with a calibration certificate that is traceable to DIN and includes the test measurements that confirm accuracy.
    Note: Accuracy ratings apply to the entire torque range.
    Material
    No. of
    Pieces
    Components Included
    Torque Range,
    in·lbf
    Graduations,
    in·lbf
    Clockwise
    Accuracy
    Torque-Limiting
    Direction
    Certificate Type
    Overall Lg.
    with Shaft
    Shaft
    Handle
    Container
    Type
    Each
    Click Torque Limiter
     
    Measures in·lbf
    86 Changeable Shafts
    1 Screwdriver Handle
    1 Torque Adjustment Tool    		5 to 180.5±6%ClockwiseCalibration Certificate with Test Data Traceable to DIN7 5/8"Chrome-Plated SteelPlasticCanvas Pouch00000000000000
     

    Adjustable Screwdriver Sets

    Image of Product. Chrome-Plated Steel with Ultra Grip. Front orientation. Screwdrivers. Adjustable Screwdriver Sets, Ultra Grip.

    Chrome-Plated Steel with

    Ultra Grip

    Say goodbye to bulky screwdriver sets. Just swap out the shaft to fasten a variety of screws with a single tool. These screwdrivers free up space in your toolkit and are easy to carry wherever the job takes you.
    Screwdrivers with an adjustable handle let you modify the shaft's length. Press down on the handle’s collar to slide the shaft in or out.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Components Included
    Sizes Included
    Overall Lg.
    Grip
    Style
    Each
    Chrome-Plated Steel
    51 Adjustable Screwdriver Handle
    4 Reversible Shafts    		Phillips: No. 1, No. 2
    Slotted: 9/64", 3/16", 7/32", 17/64"
    Square: No. 1, No. 2    		6 1/4" to 9 1/4"Ultra Grip000000000000
    61 Adjustable Screwdriver Handle
    5 Reversible Shafts    		Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T406 1/4" to 9 1/4"Ultra Grip00000000000
    151 Adjustable Screwdriver Handle
    14 Reversible Shafts    		Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
    Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Phillips: No. 1, No. 2
    Slotted: 9/64", 3/16", 7/32", 17/64"
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40    		6 1/4" to 9 1/4"Ultra Grip000000000000
     
    Reversible Shafts
    Drive Size
    Overall
    Lg.
    Material
    Each
    Hex
    3/32" x 7/64"6"Chrome-Plated Steel000000000000
    1/8" x 9/64"6"Chrome-Plated Steel00000000000
    5/32" x 3/16"6"Chrome-Plated Steel00000000000
    2 mm x 2.5 mm6"Chrome-Plated Steel00000000000
    3 mm x 4 mm6"Chrome-Plated Steel00000000000
    5 mm x 6 mm6"Chrome-Plated Steel00000000000
     
    Slotted and Phillips
    1/8" x No. 06"Chrome-Plated Steel000000000000
    5/32" x No. 16"Chrome-Plated Steel000000000000
    1/4" x No. 26"Chrome-Plated Steel000000000000
     
    Square
    No. 1 x No. 26"Chrome-Plated Steel000000000000
     
    Tamper-Resistant Torx
    T6 x T86"Chrome-Plated Steel000000000000
    T7 x T96"Chrome-Plated Steel000000000000
    T10 x T156"Chrome-Plated Steel000000000000
    T20 x T256"Chrome-Plated Steel000000000000
    T30 x T406"Chrome-Plated Steel000000000000
     

    T-Handle Key Sets

    Image of Product. Front orientation. T-Handle Keys. T-Handle Key Sets.
    Keep a selection of top-quality T-handle keys on hand, so you always have the size you need. They're perfect for cranking screws in large machinery, such as engines and CNC mills. A wide handle gives you maximum leverage, and a long shaft reaches into deep pockets. The shaft is permanently bonded to the handle for a secure hold that won't break under high torque. To prevent slipping, these T-handle keys are precision manufactured to tight tolerances for an exact fit. Made of hardened steel, they'll last a lifetime in your tool kit.
    Black-Oxide Steel—The dark, matte coating offers minimal corrosion resistance, so these T-handle keys are best for dry environments.
    Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.
    No. of
    Pieces
    Includes
    Grip
    Style
    Relative
    Lg.
    Container
    Type
    Each
    Hex
     
    Black-Oxide Steel
    62 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    2.5 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    3 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    4 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    5 mm Hex T-Handle Key (6 13/16" O'all Lg.)
    6 mm Hex T-Handle Key (6 13/16" O'all Lg.)    		Ultra GripStandardPlastic Pouch0000000000000
    62 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    2.5 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    3 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    4 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    5 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    6 mm Hex T-Handle Key (9 3/4" O'all Lg.)    		Ultra GripLongPlastic Pouch000000000000
    82 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    2.5 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    3 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    4 mm Hex T-Handle Key (6 5/8" O'all Lg.)
    5 mm Hex T-Handle Key (6 13/16" O'all Lg.)
    6 mm Hex T-Handle Key (6 13/16" O'all Lg.)
    8 mm Hex T-Handle Key (7" O'all Lg.)
    10 mm Hex T-Handle Key (7" O'all Lg.)    		Ultra GripStandardPlastic Pouch000000000000
    82 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    2.5 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    3 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    4 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    5 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    6 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    8 mm Hex T-Handle Key (10 O'all Lg.)
    10 mm Hex T-Handle Key (10" O'all Lg.)    		Ultra GripLongPlastic Pouch000000000000
    95/64" Hex T-Handle Key (6 5/8" O'all Lg.)
    3/32" Hex T-Handle Key (6 5/8" O'all Lg.)
    7/64" Hex T-Handle Key (6 5/8" O'all Lg.)
    1/8" Hex T-Handle Key (6 5/8" O'all Lg.)
    9/64" Hex T-Handle Key (6 5/8" O'all Lg.)
    5/32" Hex T-Handle Key (6 5/8" O'all Lg.)
    3/16" Hex T-Handle Key (6 13/16" O'all Lg.)
    7/32" Hex T-Handle Key (6 13/16" O'all Lg.)
    1/4" Hex T-Handle Key (6 13/16" O'all Lg.)    		Ultra GripStandardPlastic Pouch000000000000
    95/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    3/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    7/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    1/8" Hex T-Handle Key (9 3/4" O'all Lg.)
    9/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    5/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    3/16" Hex T-Handle Key (9 3/4" O'all Lg.)
    7/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    1/4" Hex T-Handle Key (9 3/4" O'all Lg.)    		Ultra GripLongPlastic Pouch000000000000
    115/64" Hex T-Handle Key (6 5/8" O'all Lg.)
    3/32" Hex T-Handle Key (6 5/8" O'all Lg.)
    7/64" Hex T-Handle Key (6 5/8" O'all Lg.)
    1/8" Hex T-Handle Key (6 5/8" O'all Lg.)
    9/64" Hex T-Handle Key (6 5/8" O'all Lg.)
    5/32" Hex T-Handle Key (6 5/8" O'all Lg.)
    3/16" Hex T-Handle Key (6 13/16" O'all Lg.)
    7/32" Hex T-Handle Key (6 13/16" O'all Lg.)
    1/4" Hex T-Handle Key (6 13/16" O'all Lg.)
    5/16" Hex T-Handle Key (7" O'all Lg.)
    3/8" Hex T-Handle Key (7" O'all Lg.)    		Ultra GripStandardPlastic Pouch000000000000
    115/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    3/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    7/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    1/8" Hex T-Handle Key (9 3/4" O'all Lg.)
    9/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    5/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    3/16" Hex T-Handle Key (9 3/4" O'all Lg.)
    7/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    1/4" Hex T-Handle Key (9 3/4" O'all Lg.)
    5/16" Hex T-Handle Key (10" O'all Lg.)
    3/8" Hex T-Handle Key (10" O'all Lg.)    		Ultra GripLongPlastic Pouch000000000000
     

    Screw-Holding Ball-Tip Screwdriver Sets

    Image of ProductInUse. Front orientation. Contains Annotated. Easy Align, Driver, Manual, Ball Tip, Sold as Sets, Standard.
    Image of Product. Front orientation. Screwdrivers. Screw-Holding Ball-Tip Screwdriver Sets.
    Image of Product. With Retaining Ring. Front orientation. Screwdrivers. Screw-Holding Ball-Tip Screwdriver Sets.

    With

    Retaining

    Ring

    Image of Product. With Ball Detent. Front orientation. Screwdrivers. Screw-Holding Ball-Tip Screwdriver Sets.

    With Ball

    Detent

    Turn a variety of screws in hard-to-reach places with just one hand. The ball tip has a detent or a retaining ring that grips screws securely to stop them from falling off as you fasten. Also, the ball tip engages the screw drive at an angle to squeeze into tight spots.
    Steel—Best for dry environments, since moisture will cause it to rust.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Max. Access
    Angle
    Screw-Holding
    Mechanism
    Grip
    Style
    Container
    Type
    Each
    Hex
    81/8" Hex Screwdriver—9 3/4" O'all Lg.
    9/64" Hex Screwdriver—9 3/4" O'all Lg.
    5/32" Hex Screwdriver—10 3/4" O'all Lg.
    3/16" Hex Screwdriver—10 3/4" O'all Lg.
    7/32" Hex Screwdriver—10 3/4" O'all Lg.
    1/4" Hex Screwdriver—10 3/4" O'all Lg.
    5/16" Hex Screwdriver—10 3/4" O'all Lg.
    3/8" Hex Screwdriver—10 3/4" O'all Lg.    		Chrome-Plated Steel20°Retaining RingUltra Grip—000000000000
    91.5 mm Hex Screwdriver—4 3/4" O'all Lg.
    2 mm Hex Screwdriver—5" O'all Lg.
    2.5 mm Hex Screwdriver—5 1/8" O'all Lg.
    3 mm Hex Screwdriver—6 3/4" O'all Lg.
    4 mm Hex Screwdriver—8 1/4" O'all Lg.
    5 mm Hex Screwdriver—8 3/4" O'all Lg.
    6 mm Hex Screwdriver—10 1/4" O'all Lg.
    8 mm Hex Screwdriver—11 1/4" O'all Lg.
    10 mm Hex Screwdriver—12 1/4" O'all Lg.    		Steel20°Ball DetentUltra GripPlastic Pouch00000000000
    130.050" Hex Screwdriver—4 1/8" O'all Lg.
    1/16" Hex Screwdriver—4 3/4" O'all Lg.
    5/64" Hex Screwdriver—4 7/8" O'all Lg.
    3/32" Hex Screwdriver—5 1/4" O'all Lg.
    7/64" Hex Screwdriver—5 3/8" O'all Lg.
    1/8" Hex Screwdriver—6 5/8" O'all Lg.
    9/64" Hex Screwdriver—6 7/8" O'all Lg.
    5/32" Hex Screwdriver—8" O'all Lg.
    3/16" Hex Screwdriver—8" O'all Lg.
    7/32" Hex Screwdriver—9" O'all Lg.
    1/4" Hex Screwdriver—10" O'all Lg.
    5/16" Hex Screwdriver—10 1/2" O'all Lg.
    3/8" Hex Screwdriver—11 1/2" O'all Lg.    		Steel20°Ball DetentUltra GripPlastic Pouch00000000000
     

    Easy-Align Ball-Tip T-Handle Key Sets

    Image of ProductInUse. Front orientation. Contains Annotated. Easy-Align Ball-Tip T-Handle Key Sets.
    Image of Product. Front orientation. T-Handle Keys. Easy-Align Ball-Tip T-Handle Key Sets.
    Turn screws at an angle when you can't access them head on. These T-handle key sets have a ball tip that engages the drive with less contact than a straight tip. They're handy for reaching screws in corners and underneath large machines, such as lathes and CNC mills. However, ball tips don't grip as tightly as straight tips and may strip threads if you crank them too hard. The highest-quality T-handle keys you can find, these are made of hardened steel to last a lifetime in your tool kit.
    Black-Oxide Steel—The dark, matte coating offers minimal corrosion resistance, so these T-handle keys are best for dry environments.
    Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.
    No. of
    Pieces
    Includes
    Grip
    Style
    Max. Access
    Angle
    Relative
    Lg.
    Container
    Type
    Each
    Hex
     
    Black-Oxide Steel
    82 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    2.5 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    3 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    4 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    5 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    6 mm Hex T-Handle Key (9 3/4" O'all Lg.)
    8 mm Hex T-Handle Key (10 O'all Lg.)
    10 mm Hex T-Handle Key (10" O'all Lg.)    		Ultra Grip20°LongPlastic Pouch00000000000000
    115/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    3/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    7/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    1/8" Hex T-Handle Key (9 3/4" O'all Lg.)
    9/64" Hex T-Handle Key (9 3/4" O'all Lg.)
    5/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    3/16" Hex T-Handle Key (9 3/4" O'all Lg.)
    7/32" Hex T-Handle Key (9 3/4" O'all Lg.)
    1/4" Hex T-Handle Key (9 3/4" O'all Lg.)
    5/16" Hex T-Handle Key (10" O'all Lg.)
    3/8" Hex T-Handle Key (10" O'all Lg.)    		Ultra Grip20°LongPlastic Pouch0000000000000
     

    Screw Starter Sets

    Image of Product. Front orientation. Screw Starters. Screw Starter Sets.
    Image of Specification. Slotted. Front orientation. For Slotted Drives.

    Slotted

    Sets include an assortment of screw starters for gripping and turning screws that are too small to hold by hand or located in hard-to-reach spots. Push the sleeve on the handle forward and insert the wedge tip into the screw slot. Release the sleeve and the tip splits and pushes out to hold the screw firmly. These tools have a contoured, ultra-grip handle for comfort. They are not intended for final tightening or removal of fasteners.
    No. of
    Pieces
    Includes
    For Screw Size
    Material
    Handle
    Material
    Screw-Holding
    Mechanism
    Container
    Type
    Each
    For Slotted Drives
    41/8" Slotted Screw Starter—5" O'all Lg.
    3/16" Slotted Screw Starter—6 1/2" O'all Lg.
    3/16" Slotted Screw Starter—8" O'all Lg.
    1/4" Slotted Screw Starter—10" O'all Lg.    		No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", M2, M2.5, M2.6, M3, M3.5, M4, M5, M6, M8, M10
    		Black-Oxide SteelPlasticWedge TipPlastic Rack0000000000000
    71/8" Slotted Screw Starter—5" O'all Lg.
    3/16" Slotted Screw Starter—6 1/2" O'all Lg.
    3/16" Slotted Screw Starter—8" O'all Lg.
    3/16" Slotted Screw Starter—8 1/2" O'all Lg.
    3/16" Slotted Screw Starter—10" O'all Lg.
    3/16" Slotted Screw Starter—12" O'all Lg.
    1/4" Slotted Screw Starter—10" O'all Lg.    		No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", M2, M2.5, M2.6, M3, M3.5, M4, M5, M6, M8, M10
    		Black-Oxide SteelPlasticWedge Tip—000000000000
     

    High-Leverage Easy-Align Ball-Tip T-Handle Key Sets

    Image of ProductInUse. Front orientation. Contains Annotated. Sold as Sets, Easy Align, Ball Tip.
    Image of Product. Front orientation. T-Handle Keys. High-Leverage Easy-Align Ball-Tip T-Handle Key Sets.
    Our most versatile T-handle key sets, these have two driving ends to tackle any fastening task. Use the ball tip on the long shaft to turn screws at an angle in hard-to-reach places. Alternatively, flip the key around and drive with the short shaft for extra leverage when loosening stubborn screws.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.
    No. of
    Pieces
    Includes
    Grip
    Style
    Max. Access
    Angle
    Each
    Hex
     
    Chrome-Plated Steel
    82 mm Hex T-Handle Key (6 7/8" O'all Lg.)
    2.5 mm Hex T-Handle Key (6 7/8" O'all Lg.)
    3 mm Hex T-Handle Key (6 7/8" O'all Lg.)
    4 mm Hex T-Handle Key (6 7/8" O'all Lg.)
    5 mm Hex T-Handle Key (7 1/8" O'all Lg.)
    6 mm Hex T-Handle Key (7 1/8" O'all Lg.)
    8 mm Hex T-Handle Key (9 1/4" O'all Lg.)
    10 mm Hex T-Handle Key (9 1/4" O'all Lg.)    		Ultra Grip20°0000000000000
    103/32" Hex T-Handle Key (6 7/8" O'all Lg.)
    7/64" Hex T-Handle Key (6 7/8" O'all Lg.)
    1/8" Hex T-Handle Key (6 7/8" O'all Lg.)
    9/64" Hex T-Handle Key (6 7/8" O'all Lg.)
    5/32" Hex T-Handle Key (6 7/8" O'all Lg.)
    3/16" Hex T-Handle Key (7 1/8" O'all Lg.)
    7/32" Hex T-Handle Key (7 1/8" O'all Lg.)
    1/4" Hex T-Handle Key (7 1/8" O'all Lg.)
    5/16" Hex T-Handle Key (9 1/4" O'all Lg.)
    3/8" Hex T-Handle Key (9 1/4" O'all Lg.)    		Ultra Grip20°0000000000000
     

    High-Leverage T-Handle Key Sets

    Image of Product. Front orientation. T-Handle Keys. High-Leverage T-Handle Key Sets.
    With two driving ends, these T-handle keys offer both extended reach and enhanced leverage. Drive with the short shaft and crank with the long to loosen stubborn screws. Alternatively, flip these keys around and drive with the long shaft to reach screws tucked deep in machinery. These sets include the most popular drive sizes, so you always have the right tool on hand.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.
    No. of
    Pieces
    Includes
    Grip
    Style
    Each
    Torx
     
    Chrome-Plated Steel
    7T10 Torx T-Handle Key (4 15/16" O'all Lg.)
    T15 Torx T-Handle Key (4 15/16" O'all Lg.)
    T20 Torx T-Handle Key (5 1/8" O'all Lg.)
    T25 Torx T-Handle Key (7 1/8" O'all Lg.)
    T27 Torx T-Handle Key (7 1/8" O'all Lg.)
    T30 Torx T-Handle Key (7 1/8" O'all Lg.)
    T40 Torx T-Handle Key (7 1/8" O'all Lg.)    		Ultra Grip0000000000000
     

    Fold-Up L-Key Sets

    Image of Product. Front orientation. L-Keys. Fold-Up L-Key Sets, Ultra Grip.

    Ultra Grip

    Multiple L-keys fold up in the handle for easy carrying, similar to a Swiss army knife. Slip these sets in your pocket and never worry about misplacing individual keys. The handle gives you leverage to tighten with minimal effort.
    Ultra Grip— The textured handle adds cushioning and is easy to grip with wet or oily hands.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Handle
    No. of
    Sizes
    Drive Size
    Max. Fold-Out
    Angle
    Material
    Lg.
    Material
    Color
    Each
    Ultra Grip
     
    Hex
    65/32", 3/16", 7/32", 1/4", 5/16", 3/8"180°Black-Oxide Alloy Steel5 1/4"PlasticRed0000000000000
    63 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm180°Black-Oxide Alloy Steel5 1/4"PlasticBlue000000000000
    71.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm180°Black-Oxide Alloy Steel3 5/8"PlasticBlue00000000000
    82 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm180°Black-Oxide Alloy Steel5 1/4"PlasticBlue000000000000
    90.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"180°Black-Oxide Alloy Steel3 5/8"PlasticRed00000000000
    95/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"180°Black-Oxide Alloy Steel4 1/4"PlasticRed00000000000
     
    Torx
    8T8, T10, T15, T20, T25, T27, T30, T40180°Black-Oxide Alloy Steel4 1/4"PlasticGreen000000000000
     
    Tamper-Resistant Torx
    7T10, T15, T20, T25, T27, T30, T40180°Black-Oxide Alloy Steel4 1/4"PlasticGreen0000000000000
     

    Adjustable Nutdriver Sets

    Image of Product. Front orientation. Nutdrivers. Adjustable Nutdriver Sets.
    Image of Attribute. Front orientation.

    An easy fix when your standard nutdriver is too short for a bolt or too long for a tight space. Press the collar on the handle to lengthen or shorten the shaft. You can also swap shafts in and out to turn nuts of different sizes.
    Chrome-Plated Steel—The bright plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Contoured and coated with soft plastic for a secure grip and maximum comfort.
    No. of
    Pieces
    Components Included
    Sizes Included
    Bolt
    Clearance
    Material
    Grip
    Style
    Container
    Type
    Each
    81 Screwdriver Handle
    7 Shafts    		3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"1"Chrome-Plated SteelUltra GripCanvas Pouch000000000000

    Tight-Clearance Flexible Nutdriver Sets

    Image of Product. Front orientation. Nutdrivers. Sold as Sets, Flexible.
    Image of Attribute. Front orientation.

    Keep a range of flexible nutdrivers on hand so you always have the size you need. The braided steel shaft bends around obstacles to adjust a nut. Slide these nutdrivers into tight or cluttered spots in compact machinery or HVAC units.
    Ultra Grip—Contoured and coated with soft plastic for a secure grip and maximum comfort.
    No. of
    Pieces
    Includes
    Bolt
    Clearance
    Construction
    Material
    Grip
    Style
    Each
    75 mm Nutdriver—10" O'all Lg.
    5.5 mm Nutdriver—10" O'all Lg.
    6 mm Nutdriver—10" O'all Lg.
    7 mm Nutdriver—10 1/2" O'all Lg.
    8 mm Nutdriver—10 1/2" O'all Lg.
    10 mm Nutdriver—11 1/2" O'all Lg.
    13 mm Nutdriver—11 1/2" O'all Lg.    		1/4" to 9/16"BraidedPlastic-Coated SteelUltra Grip000000000000000

    Easy-Align Ball-Tip Fold-Up L-Key Sets

    Image of ProductInUse. Front orientation. Contains Annotated. Easy-Align Ball-Tip Fold-Up L-Key Sets, Easy Align.
    Image of Product. Front orientation. L-Keys. Easy-Align Ball-Tip Fold-Up L-Key Sets, Ultra Grip.

    Easy Align

    Ultra Grip

    These L-keys turn screws at an angle when you can't access them head on. Fold them into the handle like a Swiss army knife when finished for easy storage and portability.
    Ultra Grip— The textured handle adds cushioning and is easy to grip with wet or oily hands.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Handle
    No. of
    Sizes
    Drive Size
    Max. Fold-Out
    Angle
    Max. Access
    Angle
    Material
    Lg.
    Material
    Color
    Each
    Ultra Grip
     
    Hex
    53/16", 7/32", 1/4", 5/16", 3/8"180°20°Black-Oxide Alloy Steel5 1/2"PlasticRed0000000000000
    54 mm, 5 mm, 6 mm, 8 mm, 10 mm180°20°Black-Oxide Alloy Steel5 1/2"PlasticBlue000000000000
    62 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm180°20°Black-Oxide Alloy Steel3 3/4"PlasticBlue000000000000
    95/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"180°20°Black-Oxide Alloy Steel4 7/16"PlasticRed000000000000
     
    back to top