We will reply to your message within an hour.
Grab some of these spoons, forks, and knives before sitting down to eat. They're available in reusable and disposable materials.
With a 4" diameter wheel, these pizza cutters quickly slice thin- and thick-crust pizzas.
Quickly serve the same portion size every time with these utensils.
Grab and serve food with these tongs.
These wire whisks make it easy to mix and whip wet and dry ingredients.
Use these spatulas for mixing, flipping, and scraping.
The short, narrow blade on these knives makes it easy to trim, peel, and slice with precision.
Chop, slice, dice, and mince with these multipurpose knives.
The curved, narrow blade can maneuver along bones to separate them from the meat.
Also known as vegetable cleavers, these knives mince, slice, and scoop chopped vegetables, including those with thick skins.
Similar to boning knives but with a more flexible blade, these knives are used to prepare fish.
Slice, dice, and cut large pieces of meat.
Often used for slicing soft fruits and vegetables, the blade on these knives is narrower than a chef's knife and longer than a paring knife.
A serrated edge allows these knives to cut through bread without tearing.
These knives have a long, straight blade that produces even cuts when slicing cooked meat.
Drain liquids and rinse food with these strainers.
Open canned food and beverages with ease.
Stir sticks come packaged loose in a box.
Toothpicks are mint flavored and come individually wrapped.
Sip and stir beverages with these disposable paper or plastic straws. They're individually wrapped so they'll stay clean if stored in an open dispenser.
Often used in food-processing applications, these plastic scoops can be located using metal detectors.
These scoops are our most chemical-resistant plastic scoops.
Move, measure, or dispense bulk materials in sanitary environments, such as food processing and pharmaceutical plants.
Includes four fine-tip markers, eight medium-tip markers, an eraser, and cleaner stored in a plastic case. All markers are low odor.
Includes a set of four or five colors. All markers are low odor.
Choose the colors you need.
Clean and restore boards to their original write-on/wipe-off capability.
When a pad becomes dirty, peel it away to expose a clean pad.
Store four markers and an eraser in the holder.
Includes one black, blue, green, and red marker.
Includes 12 black markers.
Choose only the colors you need.
Includes a set of five or eight colors.
The round sponge tip allows you to apply large, clear marks with ease—even on moving objects such as boxes on a conveyor.
A valve eliminates the risk of seepage caused by the expansion and contraction of a marker due to extreme temperature fluctuations.
You can leave the cap off of these markers for up to two weeks without them drying out.
Includes a set of four colors.
Load these markers with a color of your choice and fill up again when the ink runs out. You can change color by swapping out the ink and tip.
The thin inch-long tip allows you to make clear marks in small and confined spaces.
Once dried, writing made with these markers can be flaked off or removed with a damp cloth or brush.
Containing only trace amounts of chlorides and other halogens, these markers safely write on materials that are prone to stress cracking, such as stainless steel and titanium.
Mark storage containers, processing equipment, and other surfaces in your food plant without risking contamination.
Marks remain intact when exposed to degreasing solvents such as mineral spirits, mineral oil, gasoline, and most alcohols.
Mark surfaces that are exposed to extreme heat. Ink withstands environments 500° F or hotter.
Make marks on natural and synthetic fabric.
Write on damp surfaces and in wet conditions without smearing.
Pens are sterilized and double bagged to meet requirements for use in ISO Class 5 and Fed. Spec. Class 100 clean rooms and other clean production environments.
Wash the writing off your surface with water.
Good for wet environments, the writing from these markers won't come off with water alone.
Often used for quality control and theft detection, the ink in these markers is invisible under normal conditions but fluorescent in ultraviolet light.
Commonly used in food processing facilities, these highlighters are made of a plastic that can be detected with a metal-sensing device.
Includes blue, green, orange, pink, and yellow highlighters.
Low in chlorides and halogens, these markers won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
Mark surfaces that are exposed to extreme heat.
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
Write on cotton, wool, synthetic blends, and other fabrics with a pigment-based paint that won’t come off in laundering.
Write on wet surfaces or underwater. These paint markers also work well on dirty, rusty, and oily surfaces.
Includes one black, blue, orange, red, white, and yellow marker.
These long-life markers hold twice as much paint as our other fabric paint markers.
Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.
These long-life markers hold twice as much paint as our other wet-surface paint markers.
Includes a set of five colors.
Commonly used in food processing facilities, these pens are made of a plastic that can be detected with a metal-sensing device.
Minimize the buildup of electrostatic charge.
These pens write in black, blue, green, and red ink.
These pens are pressurized to write at any angle, on wet surfaces, and in extreme cold.
Write at any angle in food-, pharmaceutical-, and cosmetics-processing plants—these pens contain metal and chemical additives that set off metal detectors and show up on X-rays if they fall into your line.
An adhesive-backed base keeps pens where you need them.
Includes an assortment of colors.
This chalk is widest at the top for a comfortable grip.
This high-visibility chalk fluoresces when light shines on it, even in dark environments.
Write clearly with bold strokes.
Write on wet and cold rubber.
Write on glass, metal, paper, and wood.
Peel away the paper cover to write.
Also known as lumber crayons, these work better on rough surfaces than our standard wax crayons. Use on concrete, metal, and wood.
Also known as China markers, these wax-based pencils make marks that won’t wash off with water but can be wiped off with a dry cloth or sanding.
Often used for structural steel parts or layout work, markings from these crayons show through oil- and solvent-based primer coatings. Works on metal surfaces.
Rub the crayon over engraved or stamped characters to make them stand out. Paint completely fills crevices and dries with a luster.
Marks written at room temperature will hold up through heating and cooling processes. Use on welds, ingots, castings, forgings, and other metal surfaces.
Write on concrete, forgings, castings, and other rough surfaces with these paint crayons.
Paint stores energy from exposure to light to create luminescent marks you can see in the dark. Works on ceramic, fabric, glass, metal, plastic, and wood.
Low in chlorides and halogens, these crayons won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
These crayons come in a tube that makes it easier to write and keeps the crayon from drying out.
Paint dries immediately when applied to heated metal and won't smear, char, discolor, or peel.
These paint crayons work well even on dirty, rusty, and oily surfaces.
The lead automatically advances when it's lifted from the paper—no clicking required. Looks like a standard No. 2 pencil.
The rectangular profile prevents rolling.
These solid sticks of graphite write vivid lines on concrete, metal, and wood and can mark surfaces up to 1100° F without melting. Also known as lumber crayons.
Remove smudges, mistakes, and stray marks.
These pencils provide a smoother stroke with less effort than regular pencils.
Create precise drawings with these pens.
Use with plotter machines to produce design, engineering, and architectural drawings.
Remove unwanted pencil marks with ease.
Hold 2 mm lead for drawing or drafting.
These 2 mm leads come in a variety of grades, from soft to hard, to meet your drawing or drafting needs.
Easily hold this half-moon-shaped chalk to coat snap lines for line marking.
Load this chalk into chalk line reels to mark straight lines for both indoor and outdoor projects.
This chalk leaves a water-resistant mark that lasts three times longer than marks made with standard powdered chalk.
Fill these reels with powdered chalk and you'll be ready to snap a line.
Apply multiple temperature markings to workpieces, pipes, and equipment to visually identify a wide range of temperature changes.
Quickly apply temperature markings without the mess of a liquid.
Touch-up nicks and scratches on wood.
This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.
Use these pads to protect your hands from intermittent exposure to direct heat when handling hot items.