McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    27 Products

    Food and Beverage Air Tool Oil

    Image of Product. Front orientation. Oil. Food and Beverage Air Tool Oil, Aerosol Can.
    Image of Product. Front orientation. Oil. Food and Beverage Air Tool Oil, Bottle.
    Image of Product. Front orientation. Oil. Food and Beverage Air Tool Oil, Jug.

    Aerosol

    Can

    Bottle

    Jug

    For air-powered tools in food-processing and preparation areas, this oil prevents corrosion and has wear-resistant and extreme-pressure properties. It absorbs water to reduce condensation and prevent buildup.
    Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
    Vegetable Oil Base—Vegetable oil is slicker than mineral oil but also breaks down more quickly.
    FDA Compliant 21 CFR 178.3570 and NSF Registered H1—Oil that is NSF Registered H1 and oil that is FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food.
    Viscosity
    Grade
    Container
    Temp.,
    ° F
    Each
    Package
    ISO
    SAE
    SSU @ Temp.
    Size
    Net Wt.,
    oz.
    Type
    Min.
    Max.
    Color
    With
    Detergent
    Food Industry Std.
    Each
    Pkg.
    Qty.
    Pkg.
    Vegetable Oil Base
    10—70 SSU @ 100° F—11Aerosol Can-20290ClearNoNSF Registered H1
    		1298K81000000121298K820000000
    10—70 SSU @ 100° F1 gal.—Jug-20290ClearNoNSF Registered H1
    		1298K830000041298K84000000
    22822 SSU @ 100° F1 gal.—Jug-35250YellowNoFDA Compliant 21 CFR 178.3570, NSF Registered H11298K60000041298K16000000
    228110 SSU @ 100° F5 gal.—Pail-40420ClearNoFDA Compliant 21 CFR 178.3570, NSF Registered H11298K811000000————0
    2210W22 SSU @ 100° F32 fl. oz.—Bottle-35250YellowNoFDA Compliant 21 CFR 178.3570, NSF Registered H11298K500000121298K15000000
     

    Chain Oil

    Image of Product. Front orientation. Oil. Chain Oil, Bottle.

    Bottle

    Thin enough to penetrate inside chain pins and links, yet tacky so it stays in place, use this oil to lubricate chain and roller chain.
    Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
    Vegetable Oil Base—Vegetable oil is slicker than mineral oil, but it breaks down faster. It’s considered an environmentally acceptable lubricant by the EPA because it breaks down quickly in water, limiting the effect on the environment. It’s designed for use with chainsaws.
    Container
    Temp.,
    ° F
    SAE Viscosity
    Grade
    Size, fl.
    oz.
    Type
    Min.
    Max.
    Color
    With
    Detergent
    Specs. Met
    Each
    Vegetable Oil Base
    15W-5032Bottle-20200AmberNoEnvironmentally Acceptable Lubricant (EAL) per VGP8990N101000000
     

    Biodegradable Hydraulic Oil

    Image of Product. Front orientation. Oil. Biodegradable Hydraulic Oil.
    Protect equipment while having a limited impact on the environment. This oil is considered an Environmentally Acceptable Lubricant (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water. Wear-resistant properties keep hydraulic pumps and equipment working, even in high-pressure systems.
    Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
    Viscosity
    Grade
    Container
    Temp.,
    ° F
    ISO
    AGMA
    SAE
    Size,
    gal.
    Type
    Min.
    Max.
    Color
    With
    Detergent
    Specs. Met
    Each
    Vegetable Oil Base
    461205Pail-25460YellowNoEnvironmentally Acceptable Lubricant (EAL) per VGP2288N140000000
    682205Pail-25460YellowNoEnvironmentally Acceptable Lubricant (EAL) per VGP2288N15000000
     

    Biodegradable Moisture-Resistant Grease

    Image of Product. Front orientation. Grease. Biodegradable Moisture-Resistant Grease.
    Protect equipment while having a limited impact on the environment. This grease resists moisture but is still considered an Environmentally Acceptable Lubricant (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water.
    Grease lubricates most efficiently within the listed temperature range.
    2 NLGI Grade—NLGI 2 is about the consistency of peanut butter.
    Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
    Container
    Temp.,
    ° F
    NLGI Consistency
    Grade
    Base Oil
    Size, fl.
    oz.
    Type
    Min.
    Max.
    Melting
    Temp., ° F
    Color
    Each
    Lithium Thickener—Environmentally Acceptable Lubricant (EAL) per VGP
    2
    		Vegetable Oil14Grease Gun Cartridge10275385Amber2192N13000000
     

    Biodegradable Penetrating Lubricants

    Image of Product. Front orientation. Penetrating Lubricants. Biodegradable Penetrating Lubricants, Aerosol Can.
    Image of Product. Front orientation. Penetrating Lubricants. Biodegradable Penetrating Lubricants, Jug.

    Aerosol

    Can

    Jug

    Protect equipment while limiting environmental impact. These lubricants are considered Environmentally Acceptable Lubricants (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.
    Container
    Each
    Package
    Size,
    gal.
    Net Wt.,
    oz.
    Type
    Temp. Range,
    ° F
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    —11Aerosol Can-20 to 295Environmentally Acceptable Lubricant (EAL) per VGP, ASTM D58641475K41000000121475K4110000000
    1—Jug-20 to 295Environmentally Acceptable Lubricant (EAL) per VGP, ASTM D58641475K430000041475K431000000
     

    Biodegradable Food and Beverage Penetrating Lubricants

    Image of Product. Front orientation. Penetrating Lubricants. Biodegradable Food and Beverage Penetrating Lubricants.
    Protect food-processing and preparation equipment while limiting environmental impact. These thin, multipurpose lubricants are NSF registered H1 for incidental food contact and are considered Environmentally Acceptable Lubricants (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Temp. Range,
    ° F
    Specs. Met
    Food Industry Std.
    Each
    Pkg.
    Qty.
    Pkg.
    11Aerosol Can0 to 280Environmentally Acceptable Lubricant (EAL) per VGP, ASTM D5864NSF Registered H1, NSF Registered H2
    		1485K24000000121485K2410000000
     

    Food and Beverage Hydraulic Oil

    Image of Product. Front orientation. Oil. Food and Beverage Hydraulic Oil.
    For use in food-processing and preparation areas, this oil is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental food contact. It has wear-resistant properties to keep hydraulic pumps and equipment working, even in high-pressure systems.
    Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
    Vegetable Oil Base—Vegetable oil is slicker than mineral oil but also breaks down more quickly.
    Viscosity Grade
    Container
    Temp.,
    ° F
    Each
    Package
    ISO
    AGMA
    SAE
    SSU @ Temp.
    Size,
    gal.
    Type
    Min.
    Max.
    Color
    With
    Detergent
    Food Industry
    Std.
    Each
    Pkg.
    Qty.
    Pkg.
    Vegetable Oil Base
    32, 46120175 SSU @ 100° F1Jug40125YellowNoNSF Registered H1
    		3499K2200000063499K2210000000
    46120175 SSU @ 100° F5Pail40125YellowNoNSF Registered H1
    		3499K24000000————0
     

    Biodegradable Food and Beverage Penetrating Lubricants for Chain

    Image of Product. Front orientation. Penetrating Lubricants. Biodegradable Food and Beverage Penetrating Lubricants for Chain.
    Protect chain and other moving metal parts found in food-processing and preparation equipment while limiting environmental impact. These lubricants are NSF registered H1 for incidental food contact and are considered Environmentally Acceptable Lubricants (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water. Use them to cut through dirt, grease, and rust, and to protect metal surfaces.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Temp. Range,
    ° F
    Specs. Met
    Food Industry
    Std.
    Each
    Pkg.
    Qty.
    Pkg.
    11Aerosol Can10 to 150Environmentally Acceptable Lubricant (EAL) per VGP, CEC L-33-A-94NSF Registered H1
    		6159K75000000126159K7510000000
     

    Coolants for Drill Presses

    Image of Product. Front orientation. Coolants. Coolants for Drill Presses, Bottle.
    Image of Product. Front orientation. Coolants. Coolants for Drill Presses, Jug.

    Bottle

    Jug

    Use these lubricants with magnetic-base drill presses to cool machining cycles, improving workpiece surface finishes and extending tool life. All are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Dilute with water. Coolants are designed for use with Hougen drill presses. One 1.6-oz. bottle makes 16 oz. of coolant; one 1-gallon jug makes 11 gallons of coolant.
    Container
    Size
    Type
    For Use
    With
    Each
    Vegetable Base Oil
    1.6 fl. oz.BottleSteel2831A5200000
    1 gal.JugSteel2831A5300000
     

    Milling, Drilling, and Turning Coolants for Micro-Drop Dispensers

    Image of Product. Front orientation. Coolants. Milling, Drilling, and Turning Coolants for Micro-Drop Dispensers.
    Micro-drop coolant dispensers (sold separately) reduce heat with small, controlled droplets of coolant and air that dissipate heat and resist misting. Because only a small amount of coolant is used, they’re easy to clean up. Use for small jobs. They prevent corrosion and inhibit bacteria growth to prevent foul odors. They are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.
    Vegetable Base Oil—Vegetable-oil-based coolants are slipperier than synthetic-oil-based coolants, but they break down more quickly. They are sulfur free.
    Container
    Size,
    gal.
    Type
    For Use With
    Each
    Vegetable Base Oil
    1JugAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium10305K260000000
     
    back to top