The gas valve allows you to control the gas flow at your torch instead of at the machine.

All the TIG torch accessories you need to get started in one kit, including collets, collet bodies, and nozzles.

Smooth the flow of shielding gas coming out of your TIG torch nozzle, so you have more control and less waste.

Hold your tungsten electrode in place during TIG welding with these collets.

Attach TIG torch nozzles to TIG torches with these collet bodies.

Make welds quickly with these fast-melting rods.

These rods create stronger welds than standard TIG welding rods for steel.

The diamond grinding wheel creates a 20° angle on your electrode tip.

These electrodes come with a 20° angle on both ends.

These electrodes come with a 20° angle on both ends.

These electrodes come with a 20° angle on both ends.

These electrodes come with a 20° angle on both ends.

These guns let you weld with more power for longer periods of time than standard MIG guns.

Use this wire on steel sheets.

Increase the wear resistance of your base metal, or restore a worn-down surface with this wire.

This wire creates stronger welds than standard MIG welding wire for aluminum.

Use these pads with all types of wire to reduce weld spatter.

Ensure high-quality welds by protecting your welding wire from humidity and corrosion.

These electrodes are designed for optimum performance when used with an AC power source.

Make welds quickly with these fast-melting electrodes.

Join gray iron, ductile iron, malleable iron, and alloy cast iron to themselves, and to each other.

These nickel-free electrodes make nonmachinable welds.

These electrodes are commonly used for metallic carbon arc welding of brass, bronze, and copper to themselves, and to mild steel, stainless steel, and cast iron.

For less waste, these holders grasp the electrode close to the end.

Speed up weld removal, edge preparation, gouging, and repairs when you use a holder with your carbon-gouging electrodes.

Store electrodes at a temperature that keeps them dry and in prime condition.

Use hot compressed air to weld plastics.

To apply this antispatter, also known as tip-dip, dunk your MIG gun nozzle into the container.

This thick liquid handles high-heat applications.

Create a dam or mold with these plates to control metal flow while welding.

Check bevel angles, excess weld metal (capping size), and length of a corner-weld leg.

Create a complete Harris torch or replace parts with our selection of handles, mixers, welding tips, cutting attachments, and cutting tips.

With a needle-point flame, these kits are well-suited for use on electronics, plumbing, and small parts. They produce enough heat to weld steel up to 1/8" thick.

The pointed tip is best for tight areas or for a small weld.

The pointed tip is best for tight areas or for a small weld.

Use this ratchet-style tool to clean, dress, and shape electrodes without disassembly.

Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.

Push the lever to lock the handle and prevent accidental opening.

Mount these clamps to a bench top or other surface to keep workpieces in place.

Push the lever to lock the handle and prevent accidental opening.

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

The handle locks in a horizontal position for more clearance above the clamp.

Mount these clamps below a surface.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

These clamps have mounting holes on the bottom.