Search Results
Length Length |
|---|
Usable Length Usable Length |
|---|
Material Material |
|---|
|
End Type End Type |
|---|
 |  |
| Wire Retainer | Locking Retainer |
Retainer Closure Retainer Closure |
|---|
|
Retainer Clearance Retainer Clearance |
|---|
|
|
|
Pin Type Pin Type |
|---|
 |  |
| Clevis | For Tubing |
 | |
| Cotter |
Minimum Hardness Minimum Hardness |
|---|
|
Wire-Lock Clevis Pins
Rounded Retainer with Loop Closure
Rounded Retainer with Easy-Release Tab
Squared Retainer with Hook Closure
Squared Retainer with Loop Closure
Squared Retainer with Easy-Release Tab
The wire retainer snaps closed to secure the pin for a one-piece alternative to a clevis and cotter pin combination. Also known as PTO pins.
Pins with easy-release tab are easier to install and remove than other wire-lock clevis pins.
Zinc-plated steel pins have good strength and some corrosion resistance. Pins that meet SAE J429 comply with specifications and testing requirements for material quality. They have a coating that protects them from rusting due to salt spray.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
| Dia. | Usable Lg. | Lg. | Retainer Clearance | Min. Hardness | Specifications Met | Each | |
Rounded Retainer with Loop Closure | |||||||
|---|---|---|---|---|---|---|---|
Zinc-Plated 1004-1045 Carbon Steel | |||||||
| 1/4" | 1 1/8" | 2" | 1 5/8" | Rockwell B55 | __ | 000000000 | 00000 |
| 1/4" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 1/4" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 1 1/8" | 2" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 1 1/8" | 2" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 1 3/8" | 2 3/8" | 1 3/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
Zinc-Plated 1008-1018 Carbon Steel | |||||||
| 1/4" | 1 3/4" | 2 3/8" | 1 5/8" | Not Rated | __ | 000000000 | 0000 |
| 5/16" | 1 3/4" | 2 1/4" | 1 5/8" | Not Rated | __ | 000000000 | 0000 |
| 5/16" | 2 1/2" | 3 1/16" | 2" | Not Rated | __ | 000000000 | 0000 |
| 3/8" | 1 1/2" | 2 1/16" | 1 1/2" | Not Rated | __ | 000000000 | 0000 |
18-8 Stainless Steel | |||||||
| 1/4" | 1 1/8" | 2" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 1/4" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 1/4" | 1 3/4" | 2 3/8" | 1 5/8" | Rockwell B80 | __ | 000000000 | 0000 |
| 1/4" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B75 | __ | 000000000 | 0000 |
| 5/16" | 1 1/8" | 2" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 5/16" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 5/16" | 1 3/4" | 2 1/4" | 1 5/8" | Rockwell B80 | __ | 000000000 | 0000 |
| 5/16" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 5/16" | 2 1/2" | 3 1/16" | 2" | Rockwell B80 | __ | 000000000 | 0000 |
| 3/8" | 1 1/8" | 2" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 3/8" | 1 3/8" | 2 3/8" | 1 3/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 3/8" | 1 1/2" | 2 1/16" | 1 1/2" | Rockwell B80 | __ | 000000000 | 0000 |
| 3/8" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
Rounded Retainer with Loop with Easy-Release Tab Closure | |||||||
Zinc-Plated 1004-1045 Carbon Steel | |||||||
| 1/4" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 1 3/8" | 2 3/8" | 1 3/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B55 | __ | 000000000 | 0000 |
Zinc-Plated 1008-1018 Carbon Steel | |||||||
| 1/4" | 1 3/4" | 2 3/8" | 1 5/8" | Not Rated | __ | 000000000 | 0000 |
18-8 Stainless Steel | |||||||
| 1/4" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 1/4" | 1 3/4" | 2 3/8" | 1 5/8" | Rockwell B80 | __ | 000000000 | 0000 |
| 5/16" | 1 3/8" | 2 3/8" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 5/16" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B75 | __ | 000000000 | 0000 |
| 3/8" | 1 3/8" | 2 3/8" | 1 3/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 3/8" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B75 | __ | 000000000 | 0000 |
Squared Retainer with Hook Closure | |||||||
Zinc-Plated 1004-1045 Carbon Steel | |||||||
| 1/4" | 3" | 3 3/4" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 1/4" | 3 1/2" | 4 1/4" | 1 3/4" | Rockwell B55 | __ | 000000000 | 0000 |
| 1/4" | 4" | 4 3/4" | 2" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 3" | 3 3/4" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 3 1/2" | 4 1/4" | 1 3/4" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 4" | 4 3/4" | 2" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 3" | 3 3/4" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 3 1/2" | 4 1/4" | 1 3/4" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 4" | 4 3/4" | 2" | Rockwell B55 | __ | 000000000 | 0000 |
| 1/2" | 4 1/4" | 6" | 3" | Rockwell B90 | __ | 000000000 | 0000 |
| 5/8" | 4 1/4" | 6" | 3" | Rockwell B90 | __ | 000000000 | 0000 |
| 3/4" | 4 1/4" | 6" | 3" | Rockwell B90 | __ | 000000000 | 0000 |
| 3/4" | 6 1/4" | 8" | 3" | Rockwell B90 | __ | 000000000 | 00000 |
| 7/8" | 6 1/4" | 7 1/2" | 3 1/4" | Rockwell B90 | __ | 000000000 | 00000 |
| 1" | 6 1/4" | 7 3/4" | 3 1/4" | Rockwell B90 | __ | 000000000 | 00000 |
Zinc-Plated 1144 Carbon Steel | |||||||
| 1/2" | 3 1/2" | 5 1/8" | 2 1/2" | Rockwell C22 | __ | 000000000 | 0000 |
| 5/8" | 4" | 5 3/4" | 3 3/8" | Rockwell C22 | __ | 000000000 | 0000 |
| 3/4" | 4" | 5 3/4" | 3 1/4" | Rockwell C22 | __ | 000000000 | 00000 |
| 3/4" | 6" | 7 3/4" | 3 1/4" | Rockwell C22 | __ | 000000000 | 00000 |
| 7/8" | 5 1/2" | 7 3/8" | 3 1/4" | Rockwell C22 | __ | 000000000 | 00000 |
| 1" | 5 1/2" | 7 3/8" | 3 1/4" | Rockwell C22 | __ | 000000000 | 00000 |
18-8 Stainless Steel | |||||||
| 1/4" | 3" | 3 3/4" | 1 1/2" | Rockwell B75 | __ | 000000000 | 00000 |
| 1/4" | 3 1/2" | 4 1/4" | 1 3/4" | Rockwell B75 | __ | 000000000 | 00000 |
| 1/4" | 4" | 4 3/4" | 2" | Rockwell B75 | __ | 000000000 | 00000 |
| 5/16" | 3" | 3 3/4" | 1 1/2" | Rockwell B75 | __ | 000000000 | 00000 |
| 5/16" | 3 1/2" | 4 1/4" | 1 3/4" | Rockwell B75 | __ | 000000000 | 00000 |
| 5/16" | 4" | 4 3/4" | 2" | Rockwell B75 | __ | 000000000 | 00000 |
| 3/8" | 3" | 3 3/4" | 1 1/2" | Rockwell B75 | __ | 000000000 | 00000 |
| 3/8" | 3 1/2" | 4 1/4" | 1 3/4" | Rockwell B75 | __ | 000000000 | 00000 |
| 3/8" | 4" | 4 3/4" | 2" | Rockwell B75 | __ | 000000000 | 00000 |
| 1/2" | 3 1/2" | 5 1/8" | 2 1/2" | Rockwell B75 | __ | 000000000 | 00000 |
| 5/8" | 4" | 5 3/4" | 3 3/8" | Rockwell B75 | __ | 000000000 | 00000 |
| 3/4" | 4" | 5 3/4" | 3 1/4" | Rockwell B75 | __ | 000000000 | 00000 |
| 3/4" | 6" | 7 3/4" | 3 1/4" | Rockwell B75 | __ | 000000000 | 00000 |
| 7/8" | 5 1/2" | 7 3/8" | 3 1/4" | Rockwell B75 | __ | 000000000 | 00000 |
| 1" | 5 1/2" | 7 3/8" | 3 1/4" | Rockwell B75 | __ | 000000000 | 00000 |
Squared Retainer with Loop Closure | |||||||
Zinc-Plated 1004-1045 Carbon Steel | |||||||
| 1/4" | 1 7/8" | 2 7/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 1/4" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 1 7/8" | 2 7/8" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 5/16" | 2 7/8" | 3 5/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 1 7/8" | 2 7/8" | 1 1/2" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 3/8" | 2 7/8" | 3 5/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
| 1/2" | 3" | 3 7/8" | 1 5/8" | Rockwell B55 | __ | 000000000 | 0000 |
Zinc-Plated 1008-1010 Carbon Steel | |||||||
| 1/4" | 2 7/8" | 3 5/8" | 1 11/16" | Not Rated | __ | 000000000 | 0000 |
| 5/16" | 3 7/16" | 4 5/16" | 1 5/8" | Not Rated | __ | 000000000 | 0000 |
| 5/16" | 3 9/16" | 4 13/16" | 1 5/8" | Not Rated | __ | 000000000 | 0000 |
| 3/8" | 3 7/16" | 4 5/16" | 1 5/8" | Not Rated | __ | 000000000 | 0000 |
| 3/8" | 3 9/16" | 4 13/16" | 1 5/8" | Not Rated | __ | 000000000 | 0000 |
Zinc-Plated 1008-1018 Carbon Steel | |||||||
| 1/4" | 2 1/2" | 3" | 1 9/16" | Not Rated | __ | 000000000 | 0000 |
| 5/16" | 2 1/2" | 3 1/16" | 1 3/4" | Not Rated | __ | 000000000 | 0000 |
| 3/8" | 2 1/4" | 2 7/8" | 1 1/2" | Not Rated | __ | 000000000 | 0000 |
Black Carbon Steel | |||||||
| 1/4" | 2 3/16" | 3 1/16" | 1 3/4" | Not Rated | SAE J429 | 000000000 | 0000 |
| 5/16" | 2 3/16" | 3 1/16" | 1 11/16" | Not Rated | SAE J429 | 000000000 | 0000 |
| 3/8" | 2 3/16" | 3 1/16" | 1 5/8" | Not Rated | SAE J429 | 000000000 | 0000 |
| 1/2" | 3" | 3 13/16" | 1 5/8" | Not Rated | SAE J429 | 000000000 | 0000 |
18-8 Stainless Steel | |||||||
| 1/4" | 1 7/8" | 2 7/8" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 1/4" | 2 1/8" | 3 1/8" | 1 3/4" | Rockwell B75 | __ | 000000000 | 0000 |
| 1/4" | 2 1/2" | 3" | 1 9/16" | Rockwell B80 | __ | 000000000 | 0000 |
| 5/16" | 1 7/8" | 2 7/8" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 5/16" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 5/16" | 2 1/2" | 3 1/16" | 1 3/4" | Rockwell B80 | __ | 000000000 | 0000 |
| 5/16" | 2 7/8" | 3 5/8" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 3/8" | 1 7/8" | 2 7/8" | 1 1/2" | Rockwell B75 | __ | 000000000 | 0000 |
| 3/8" | 2 1/8" | 3 1/8" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 3/8" | 2 1/4" | 2 7/8" | 1 1/2" | Rockwell B80 | __ | 000000000 | 0000 |
| 3/8" | 2 7/8" | 3 5/8" | 1 5/8" | Rockwell B75 | __ | 000000000 | 0000 |
| 1/2" | 3" | 3 13/16" | 1 5/8" | Rockwell B75 | __ | 000000000 | 00000 |
Squared Retainer with Loop with Easy-Release Tab Closure | |||||||
Zinc-Plated 1004-1045 Carbon Steel | |||||||
| 1/4" | 2 1/2" | 3" | 1 1/2" | Not Rated | __ | 000000000 | 0000 |
| 5/16" | 2 1/2" | 3" | 1 1/2" | Not Rated | __ | 000000000 | 0000 |
| 3/8" | 2 1/2" | 3" | 1 1/2" | Not Rated | __ | 000000000 | 0000 |
18-8 Stainless Steel | |||||||
| 1/4" | 2 1/4" | 3 1/16" | 1 5/8" | Rockwell B75 | __ | 000000000 | 00000 |
| 5/16" | 2 1/4" | 3 1/16" | 1 5/8" | Rockwell B75 | __ | 000000000 | 00000 |
| 3/8" | 2 1/4" | 3 1/16" | 1 5/8" | Rockwell B75 | __ | 000000000 | 00000 |
| 3/8" | 2 1/2" | 3 1/16" | 1 1/2" | Rockwell B80 | __ | 000000000 | 00000 |
Wire-Lock Pins for Telescoping Tubing
Sized to fit snugly around pipe and tube, these pins use spring force to keep the retainer closed. Also known as linch pins and PTO pins, use them for a one-piece alternative to a clevis and cotter pin combination.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Locking Clevis Pins
Often used to connect equipment to a drawbar in towing applications, these rugged pins have a welded solid steel retainer. The hinged handle and lock prevent disengaging.
For technical drawings and 3-D models, click on a part number.
| Dia. | Usable Lg. | Lg. | Retainer Clearance | Min. Hardness | Each | |
Black Powder-Coated 1004-1045 Carbon Steel | ||||||
|---|---|---|---|---|---|---|
| 5/8" | 4 1/2" | 8" | 3" | Rockwell C32 | 000000000 | 000000 |
| 3/4" | 4 1/2" | 8" | 3" | Rockwell C32 | 000000000 | 00000 |
| 3/4" | 6" | 10" | 3" | Rockwell C32 | 000000000 | 00000 |
| 7/8" | 4 1/2" | 8" | 3" | Rockwell C32 | 000000000 | 00000 |
| 7/8" | 6" | 10" | 3" | Rockwell C32 | 000000000 | 00000 |
| 1" | 6" | 10" | 3" | Rockwell C32 | 000000000 | 00000 |
| 1 1/8" | 7" | 11" | 3 3/4" | Rockwell C32 | 000000000 | 00000 |
| 1 1/4" | 7" | 11" | 3 3/4" | Rockwell C32 | 000000000 | 00000 |
| 1 1/2" | 8" | 12" | 3 3/4" | Rockwell C32 | 000000000 | 00000 |
Strong-Hold Wire-Snap Cotter Pins
Wire-Snap Cotter Pin
Wire-Snap Cotter Pin with Lanyard
These pins are coiled for more tension than standard wire-snap cotter pins. Also known as safety pins, they are easy to install and remove. Tension keeps them closed. Use them to secure the ends of clevis pins and shafts to keep components in place. Choose a pin with a lanyard to keep the pin from getting lost when removed.
Zinc-plated steel pins have good strength and some corrosion resistance.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
| Wire Dia. | Usable Lg. | Lg. | Retainer Clearance | Pkg. Qty. | Pkg. | |
Wire-Snap Cotter Pins | ||||||
|---|---|---|---|---|---|---|
Zinc-Plated 1050-1095 Spring Steel | ||||||
| 3/64" | 15/16" | 1 9/16" | 3/8" | 25 | 000000000 | 00000 |
| 1/16" | 1 1/16" | 1 3/4" | 3/8" | 25 | 000000000 | 0000 |
| 3/32" | 1 11/16" | 2 3/4" | 5/8" | 25 | 000000000 | 0000 |
| 1/8" | 2 13/16" | 4 3/8" | 3/4" | 10 | 000000000 | 0000 |
| 5/32" | 3 3/4" | 5 3/4" | 1 1/8" | 10 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||
| 1/16" | 1 5/8" | 2 5/8" | 5/8" | 1 | 000000000 | 0000 |
| 3/32" | 1 5/8" | 2 5/8" | 5/8" | 1 | 000000000 | 0000 |
| 3/32" | 2" | 3 1/4" | 5/8" | 1 | 000000000 | 0000 |
| 3/32" | 2 1/2" | 3 3/4" | 5/8" | 1 | 000000000 | 0000 |
| 1/8" | 2" | 3 3/4" | 3/4" | 1 | 000000000 | 0000 |
| 1/8" | 2 1/2" | 4 1/4" | 3/4" | 1 | 000000000 | 0000 |
| 1/8" | 3" | 5" | 3/4" | 1 | 000000000 | 0000 |
| 5/32" | 2 1/2" | 4 1/4" | 3/4" | 1 | 000000000 | 0000 |
| 5/32" | 3" | 5" | 3/4" | 1 | 000000000 | 0000 |
Wire-Snap Cotter Pins with Stainless Steel Lanyard | ||||||
18-8 Stainless Steel | ||||||
| 1/16" | 1 5/8" | 2 5/8" | 5/8" | 1 | 000000000 | 0000 |
| 3/32" | 1 5/8" | 2 5/8" | 5/8" | 1 | 000000000 | 0000 |
| 3/32" | 2" | 3 1/4" | 5/8" | 1 | 000000000 | 0000 |
| 3/32" | 2 1/2" | 3 3/4" | 5/8" | 1 | 000000000 | 0000 |
| 1/8" | 2" | 3 3/4" | 3/4" | 1 | 000000000 | 0000 |
| 1/8" | 2 1/2" | 4 1/4" | 3/4" | 1 | 000000000 | 0000 |
| 1/8" | 3" | 5" | 3/4" | 1 | 000000000 | 0000 |
| 5/32" | 2 1/2" | 4 1/4" | 3/4" | 1 | 000000000 | 0000 |
| 5/32" | 3" | 5" | 3/4" | 1 | 000000000 | 0000 |
Wire Snap Cotter Pins
Also known as safety pins, these are easy to install and remove. Tension keeps them closed. Use them to secure the ends of clevis pins and shafts to keep components in place.
For technical drawings and 3-D models, click on a part number.