Size Size | Show |
|---|
|
Size Size | Hide |
|---|
Overall Length Overall Length |
|---|
Wrench Style Wrench Style |
|---|
 | Open End |
 | Box |
 | Combination |
Material Material |
|---|
|
Individual/Set Individual/Set |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
For Drive Style For Drive Style |
|---|
 |  |  |
| External Hex | External Square | External 12-Point |
Finish Finish |
|---|
|
Jaw Type Jaw Type |
|---|
|
Ratcheting or Nonratcheting Ratcheting or Nonratcheting |
|---|
|
For Use With For Use With |
|---|
|
Head Thickness Head Thickness |
|---|
|
|
|
Wrench Type Wrench Type |
|---|
|
Container Type Container Type |
|---|
|
Grip Material Grip Material |
|---|
|
Combination Wrenches
 12-Point Box Opening |  |
 |
Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
Ratcheting Combination Wrenches
A ratchet mechanism in the box end allows you to turn fasteners in tight spaces without removing and repositioning the wrench. Flip these wrenches over to ratchet in the opposite direction. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. Wrenches are polished for a mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Box End | Open End | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Overall Lg. | Head Thick. | Turn Required to Ratchet | Opening Angle | Head Thick. | Material | Appearance | Each | |
12-Point Box Opening | |||||||||
| 1 13/16" | 25 1/2" | 63/64" | 5° | 15° | 27/32" | Chrome-Plated Steel | Polished | 0000000 | 0000000 |
Open-End Wrenches
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
| 1 13/16" | 16 1/2" | 15° | 15/16" | Steel | Black | ASME B107 | 0000000 | 0000000 |
Two-Head Open-End Wrenches
Wrenches with square openings provide the best grip on square fasteners.
For technical drawings and 3-D models, click on a part number.
Dull Chrome Plated | ||||||
|---|---|---|---|---|---|---|
| Size | Overall Lg. | Opening Angle | Head Thick. | Material | Each | |
Rounded Openings | ||||||
| 1 11/16" × 1 13/16" | 18 1/2" | 15° | 23/32" × 45/64" | Steel | 0000000 | 000000 |
60° Angle Open-End Wrenches
One head is angled 60° for access to hard-to-reach fasteners. These tools are also known as ignition wrenches.
For technical drawings and 3-D models, click on a part number.
Aluminum Open-End Wrenches
These lightweight tools are also known as AN (Army-Navy) wrenches. The opening has recesses in the corners that won’t mar or round fasteners. Wrenches are color coded by size.
| Size | AN Size | Overall Lg. | Opening Angle | Head Thick. | Material | Color | Each | |
| 1 13/16" | 20 | 9 1/4" | 15° | 23/64" | Painted Aluminum | Dark Blue | 000000000 | 000000 |
Tight-Clearance Open-End Wrenches
Striking Open-End Wrenches
Strike the handle with a hammer to break stuck fasteners free. These are also known as slugging wrenches.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Opening Angle | Head Thick. | Material | Specifications Met | Each | |
| 1 13/16" | 10" | 15° | 25/32" | Steel | DIN 133 | 00000000 | 0000000 |
Tapered-Handle Open-End Wrenches
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
| 1 13/16" | 23" | 15° | 15/16" | Steel | Black | ASME B107 | 0000000 | 0000000 |
Deep-Offset Tapered-Handle Open-End Wrenches
The head is offset 45° to provide clearance when reaching over obstructions.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Opening Angle | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
| 1 13/16" | 24" | Straight | 13/16" | 45° | Steel | Black | ASME B107 | 0000000 | 0000000 |
Multi-Size Open-End Wrenches
Also known as alligator wrenches and water-meter nut wrenches, the V-shaped head fits multiple hex fastener sizes.
| Size | Overall Lg. | Opening Angle | Head Thick. | Jaw Finish | Material | Color | Grip Material | Each | |
| 3/4"–2" | 21" | Straight | 11/16" | Zinc Plated | Powder-Coated Steel | Red | Plastic | 0000000 | 0000000 |
Aluminum Open-End Wrench Sets
These lightweight tools are also known as AN (Army-Navy) wrenches. The openings have recesses in the corners that won’t mar or round fasteners. Wrenches are color coded by size.
| Sizes Included | Overall Lg. | Opening Angle | Material | Container Type | Each | |
8-Piece Sets | ||||||
|---|---|---|---|---|---|---|
| 1/2"—AN Size 3 (Gray) 9/16"—AN Size 4 (Black) 11/16"—AN Size 6 (Light Blue) 7/8"—AN Size 8 (Pink) 1"—AN Size 10 (Light Yellow) 1 1/4"—AN Size 12 (Red) 1 1/2"—AN Size 16 (Dark Yellow) 1 13/16"—AN Size 20 (Dark Blue) | 4"-9 1/4" | 15° | Painted Aluminum | Plastic Roll-Up Pouch | 000000000 | 0000000 |
Tight-Clearance Offset Sockets
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Each | |
1/2" Square Drive | ||||||
|---|---|---|---|---|---|---|
| 1 13/16" | 3 3/8" | 17/32" | 2 3/16" | Chrome-Plated Steel | 0000000 | 000000 |
Secure-Grip Tight-Clearance Offset Sockets
The opening makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
12-point secure-grip sockets quickly position on hex fasteners.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Each | |
12-Point Secure Grip | ||||||
|---|---|---|---|---|---|---|
1/2" Square Drive | ||||||
| 1 13/16" | 3 1/8" | 1 1/32" | 1 5/8" | Chrome-Plated Steel | 0000000 | 000000 |
6-Point Impact Sockets
Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.
3/4", 1", and 1 1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Sockets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
| Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
| 1 13/16" | 1 3/16" | 2 3/32" | __ | Steel | Black | 2 13/16" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
| 1 13/16" | 1 1/8" | 1 11/16" | 1 5/8" | Steel | Black | 2 5/8" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
| 1 13/16" | 1 1/8" | 1 1/2" | 2 1/4" | Steel | Black | 2 11/16" | 00000000 | 00000 | 00000000 | 0000 |
1 1/2" Square Drive | ||||||||||
| 1 13/16" | 1 5/32" | 1 19/32" | 2 7/8" | Steel | Black | 3 7/16" | 0000000 | 000000 | 0000000 | 0000 |
Sockets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
| Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
| 1 13/16" | 2 9/32" | 3 1/32" | __ | Steel | Black | 3 11/16" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
| 1 13/16" | 2 1/4" | 2 5/8" | 1 5/8" | Steel | Black | 3 7/8" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
| 1 13/16" | 2 21/32" | 3 9/32" | 2 1/8" | Steel | Black | 4 1/2" | 00000000 | 00000 | 0000000 | 0000 |
12-Point Impact Sockets
The 12-point shape quickly positions on hex fasteners. These sockets are made to withstand the high torque and force of impact tools.
3/4" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Premium 12-Point Socket Sets
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The 12-point shape quickly positions on hex fasteners.
| No. of Pieces | Components Included | Includes | Each | |
3/4" Square Drive | ||||
|---|---|---|---|---|
| 22 | 16 Sockets 2 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2" 20" Long Ratchet Wrench 22" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Square Drive Adapter | 0000000 | 0000000 |
| 29 | 22 Sockets 3 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8, 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2", 2 1/8", 2 3/16", 2 1/4", 2 3/8" 20" Long Ratchet Wrench 19" Long Sliding-Head Wrench Handle 22" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Long Flex Adapter | 0000000 | 00000000 |
| Foam Socket Organizer for 22 Piece 3/4" Square Drive Size Set | 0000000 | Each | 0000000 |
Ratcheting Box Wrenches
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Head OD | Head Thick. | Turn Required to Ratchet | Finish | Appearance | Grip Material | Specifications Met | Each | |
12-Point Opening | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Steel | ||||||||||
| 1 13/16" | 19" | 3 3/8" | 5/8" | 20° | Chrome Plated | Polished | Plastic | Fed. Spec. GGG-W-001405 | 0000000 | 0000000 |
Striking Box Wrenches
Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free. Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
Nonsparking Striking Box Wrenches
Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.
Warning: Do not use these tools in direct contact with acetylene.
| Size | Overall Lg. | Head Thick. | Material | Specifications Met | Each | |
6-Point Opening | ||||||
|---|---|---|---|---|---|---|
| 1 13/16" | 9 7/8" | 1" | Aluminum-Bronze | FM Approved | 0000000 | 0000000 |
Deep-Offset Striking Box Wrenches
The head is offset 45° to provide clearance for reaching over obstructions. Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.
| Size | Overall Lg. | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
12-Point Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 13/16" | 13" | 1 3/16" | 45° | Steel | Black | ASME B107 | 0000000 | 0000000 |
Deep-Offset High-Leverage Box Wrenches
A 45° offset head provides clearance for reaching over obstructions. These wrenches have a long handle for extra leverage—add an extension to increase it even more.
Extension handles (sold separately) fit securely over the end of the wrench.
For technical drawings and 3-D models, click on a part number.
Tapered-Handle Box Wrenches
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
12-Point Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 13/16" | 23" | 1 1/4" | 60° | Steel | Black | ASME B107 | 0000000 | 0000000 |