Teeth Location Teeth Location |
---|
![]() | ![]() |
Teeth on One Side | Teeth on Both Sides |
Material Material |
---|
|
Reinforcement Material Reinforcement Material |
---|
|
Neoprene is reinforced with fiberglass for quiet operation with high strength. Belts are L series (light) and have trapezoidal teeth. The teeth are nylon coated to protect the wear surface and minimize friction.
For technical drawings and 3-D models, click on a part number.
Urethane has excellent abrasion resistance, so these belts don’t create dust while they run. They are L series (light) and have trapezoidal teeth. Reinforced with Kevlar or steel, both materials provide very high strength, low stretch, and excellent shock resistance. Kevlar has higher shock resistance than steel.
For technical drawings and 3-D models, click on a part number.
Use a single belt to drive three or more pulleys in reversing and serpentine drive systems. These belts have teeth on both sides to transmit power from either side and rotate pulleys in opposite directions. Belts are neoprene with fiberglass reinforcement for quiet operation with high strength. They are L series (light) and have trapezoidal teeth. The teeth are nylon coated to protect the wear surface and minimize friction.
For technical drawings and 3-D models, click on a part number.
Belt Trade Number | Outer Circle | Number of Teeth | Pitch | Material | Color | Temperature Range, °F | Each | |
1/2" Wd. | ||||||||
---|---|---|---|---|---|---|---|---|
TP150L050 | 15" | 40 | 0.375" | Neoprene | Black | -30° to 180° | 0000000 | 000000 |