Open and close circuits quickly to minimize arcing and prevent contacts from sticking. These switches are often used as door-open indicators on appliances and enclosures.

The smallest snap-acting switches we offer, these fit into the tiniest of spaces.

With a rubber-encased housing and stainless steel bracket, these switches resist vibration and corrosion. They're rated IP68 for protection from washdowns and temporary submersion.

Small enough to fit in the tiniest spaces, these switches are rated IP67 for protection from temporary submersion.

Secure these switches into panels using mounting nuts.

Rated IP67, these switches are protected from temporary submersion.

Rated NEMA 6P, 13, and IP67, these switches are protected from corrosion, oil/coolant spraying, washdowns, and temporary submersion.

Often used on conveyor systems and bin filling operations, these switches have the rapid-closing action of a snap-acting switch but have a large actuator for sensing larger objects.

Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.

Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 16 mm switch.

These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.

Often used as position indicators, pump level controls, and machine limit switches, these switches actuate when tilted to a certain angle.

With a shallower depth than most other starters, these fit in narrow spaces.

Sized to fit in tight spaces, these starters have a shorter height and narrower depth than most other starters.

Housed in a durable steel enclosure.

Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns.

Operated by hand, these starters are more compact than electrically actuated motor starters; use them when multiple motor circuits are housed in one panel.

Combine a switch and a thermal overload element to build a starter that can handle high-current-rated motors. Also known as a NEMA starter.

Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of screw sizes.

A plastic cover on the barrel provides electrical insulation. These terminals can withstand temperatures up to 300° F.

Thicker than standard ring terminals, these are more durable.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. They are rated to 600 volts.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

These terminals withstand temperatures up to 900° F.

A plastic cover on the barrel provides electrical insulation.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

Able to withstand temperatures up to 900° F, these terminals have the highest heat resistance of the spade terminals we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

Connect two female quick-disconnects.

A single row of terminals fits in narrow spaces.

These blocks handle at least twice as much current as standard terminal blocks.

Blocks are made of ceramic to withstand elevated temperatures.

The spring-clamp terminals on these blocks make wire installation faster than other types of terminals. Push wire into the spring clamp for a secure connection that withstands vibration.

Recessed terminals prevent accidental contact with a live circuit.

Solder the pins on these blocks directly to your circuit board.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

With the help of distribution blocks, you can take a high-current wire from your power source and connect it to one or more electrical devices.

Protect connections against corrosion.These bars are tin-plated copper and have stainless steel terminals.

Maintain a supply of extra wire ferrules.

Keep a variety of male/female pairs of quick-disconnect terminals on hand.

Compress the barrel twice for an extra-tight grip in high-vibration applications.

An offset tongue gives you extra space to insert wire.

Thicker walls than standard battery terminal lugs make these more durable.

Serrations on both sides lock these lugs in place.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

Holders have snap-on or screw-on covers to fully enclose and protect batteries.

Copper rivets are electrically conductive and have good corrosion resistance.