For Use On For Use On |
---|
For Joining For Joining |
---|
|
Manufacturer Model Number Manufacturer Model Number |
---|
Begins to Harden Begins to Harden |
---|
|
|
|
Connection Type Connection Type |
---|
|
Container Size Container Size |
---|
|
|
Shear Strength Shear Strength |
---|
|
Consistency Consistency |
---|
|
Peel Strength Peel Strength |
---|
Clarity Clarity |
---|
|
Viscosity Viscosity |
---|
Approximate Coverage Approximate Coverage |
---|
|
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP405 | 1.69 | Cartridge | 3 min. | 7 days | 2,260 | 40 | 2:1 | Thick Liquid (9,500 cP) | -65° to 350° | Black | Metal, Plastic, Rubber | 00000000 | 000000 |
DP420 | 1.69 | Cartridge | 15 min. | 24 hrs. | 2,200 | 50 | 2:1 | Thick Liquid (27,000 cP) | -65° to 350° | Black | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
DP420 | 1.69 | Cartridge | 15 min. | 24 hrs. | 2,700 | 50 | 2:1 | Thick Liquid (27,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
DP420 | 6.76 | Cartridge | 15 min. | 24 hrs. | 2,700 | 50 | 2:1 | Thick Liquid (27,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
DP420NS | 1.69 | Cartridge | 20 min. | 7 days | 2,700 | 60 | 2:1 | Paste (185,000 cP) | -65° to 350° | Black | Metal, Plastic, Rubber, Composites | 00000000 | 00000 |
DP460 | 1.69 | Cartridge | 60 min. | 48 hrs. | 2,800 | 60 | 2:1 | Thick Liquid (27,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
DP460 | 6.76 | Cartridge | 60 min. | 48 hrs. | 2,800 | 60 | 2:1 | Thick Liquid (27,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
DP460NS | 1.69 | Cartridge | 60 min. | 48 hrs. | 3,600 | 60 | 2:1 | Paste (145,330 cP) | -65° to 350° | Off-White | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
DP460NS | 13.5 | Cartridge | 60 min. | 48 hrs. | 3,600 | 60 | 2:1 | Paste (145,330 cP) | -65° to 350° | Off-White | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
Each | ||
Mixer Nozzle for 1.69-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.69-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76-oz. and 13.5-oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.69-oz. 3M Cartridges | 0000000 | 00000 |
Replacement Plunger for 6.76-oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.69-oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76-oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 13.5-oz. 3M Cartridges | 00000000 | 000000 |
Air-Powered Dispensing Gun for 1.69-oz. 3M Cartridges | 0000000 | 000000 |
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
2158 bonds to damp concrete.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Specifications Met | For Joining | Each | |
2158 | 32 oz. | Can | 2 hrs. | 7 days | 2,000 | 3 | 1:1 | Paste (425,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 0000000 |
2158 | 64 oz. | Can | 2 hrs. | 7 days | 2,000 | 3 | 1:1 | Paste (425,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 1.66 gal. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 3.3 oz. | Tube | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
2216 | 4 oz. | Tube | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
2216 | 26.6 oz. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 32 oz. | Can | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 53.3 oz. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 64 oz. | Can | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 0000000 | 000000 |
DP190 | 1.64 oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
DP190 | 6.76 oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76-oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | 00000 |
Replacement Plunger for 6.76-oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76-oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
DP125, 14255, and 14251 form flexible bonds.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1838 | 3.6 | Tube | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1838 | 28.8 | Can | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 0000000 | 000000 |
1838 | 57.6 | Can | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1838L | 4 | Tube | 60 min. | 7 days | 2,000 | 4 | 1:1 | Thick Liquid (11,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
1838L | 64 | Can | 60 min. | 7 days | 2,000 | 4 | 1:1 | Thick Liquid (11,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
DP110 | 1.64 | Cartridge | 8 min. | 48 hrs. | 1,500 | 20 | 1:1 | Thick Liquid (50,000 cP) | -65° to 350° | Clear | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP110 | 1.64 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP110 | 6.76 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP125 | 1.64 | Cartridge | 15 min. | 7 days | 1,900 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber | 0000000 | 00000 |
DP125 | 1.64 | Cartridge | 20 min. | 7 days | 1,500 | 35 | 1:1 | Thick Liquid (16,250 cP) | -65° to 300° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
DP190 | 1.64 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
DP190 | 6.76 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 00000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76-oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | 00000 |
Replacement Plunger for 6.76-oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76-oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100NS and 3501 are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3501 | 4 | Tube | 6 min. | 24 hrs. | 2,000 | 10 | 1:1 | Thick Liquid (1,000,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
3501 | 32 | Can | 6 min. | 24 hrs. | 2,000 | 10 | 1:1 | Thick Liquid (1,000,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
DP100 | 1.64 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
DP100 | 6.76 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
DP100NS | 1.64 | Cartridge | 5 min. | 48 hrs. | 840 | 2 | 1:1 | Paste (93,750 cP) | -65° to 320° | White | Metal, Plastic, Rubber | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76-oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | 00000 |
Replacement Plunger for 6.76-oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76-oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
1751 and epoxy in 11-oz. tubes are reinforced with aluminum.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1751 | 3.3 | Tube | 45 min. | 7 days | 2,000 | 4 | 3:2 | Paste (700,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1751 | 26.6 | Can | 45 min. | 7 days | 2,000 | 4 | 3:2 | Paste (700,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1751 | 53.3 | Can | 45 min. | 7 days | 2,000 | 4 | 3:2 | Paste (700,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
These self-extinguishing epoxies meet UL 94V0 for flame retardance. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
DP100FR | 1.64 | Cartridge | 5 min. | 48 hrs. | 1,100 | 2 | 1:1 | Thick Liquid (73,750 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | Each | 00000 |
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | Each | 00000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | Each | 0000 |
Dispensing Gun for 1.64-oz. Cartridges | 0000000 | Each | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | Each | 000000 |
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100 Plus, DP105, and epoxy in 4.5-oz. tubes bond dissimilar materials.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
DP100 Plus | 1.64 | Cartridge | 3 min. | 48 hrs. | 1,700 | 13 | 1:1 | Thick Liquid (8,750 cP) | -65 to 300° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 000000 |
DP105 | 1.64 | Cartridge | 4 min. | 48 hrs. | 1,300 | 35 | 1:1 | Thick Liquid (7,500 cP) | -65 to 300° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
With excellent shear strength, these acrylics form stronger bonds than our standard acrylic structural adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP8407NS and DP8410NS are nonsagging, so they won't drip from vertical or overhead surfaces. They contain 0.01" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
DP8407NS | 1.52 | Cartridge | 7 min. | 24 hrs. | 4,500 | 50 | 10:1 | Thick Liquid (20,000 cP) | -40° to 400° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP805 | 1.64 | Cartridge | 3 min. | 24 hrs. | 2,800 | 35 | 1:1 | Paste (112,500 cP) | -40° to 180° | Off-White | Metal, Plastic, Rubber, Composites, Wood | 0000000 | 000000 |
DP810 | 1.64 | Cartridge | 10 min. | 24 hrs. | 3,400 | 30 | 1:1 | Thick Liquid (20,000 cP) | -40° to 180° | Beige | Metal, Plastic, Rubber, Composites, Wood | 00000000 | 00000 |
DP810NS | 1.64 | Cartridge | 10 min. | 24 hrs. | 3,400 | 23 | 1:1 | Paste (95,000 cP) | -40° to 180° | Beige | Metal, Plastic, Rubber, Composites, Wood | 00000000 | 00000 |
DP820 | 1.64 | Cartridge | 15 min. | 48 hrs. | 2,500 | 22 | 1:1 | Thick Liquid (57,500 cP) | -40° to 180° | Off-White | Metal, Plastic, Rubber, Composites, Wood | 0000000 | 00000 |
Each | ||
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | 0000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP8005 contains 0.008" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.
DP8010 and DP8010NS are moisture and corrosion resistant. DP8010NS is nonsagging, so it won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,275 | 9 | 10:1 | Thick Liquid (24,550 cP) | -65° to 200° | Black | Plastic | 00000000 | 000000 |
DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,500 | 17 | 10:1 | Thick Liquid (25,460 cP) | -65° to 200° | Off-White | Plastic | 00000000 | 00000 |
DP8010 | 1.52 | Cartridge | 10 min. | 24 hrs. | 2,700 | Not Rated | 10:1 | Thick Liquid (20,000 cP) | -40° to 200° | Blue | Plastic | 0000000 | 00000 |
DP8010NS | 1.52 | Cartridge | 10 min. | 24 hrs. | 2,700 | Not Rated | 10:1 | Thick Liquid (65,000 cP) | -40° to 200° | Blue | Plastic | 0000000 | 00000 |
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
A step tip allows you to trim the opening to the diameter you need.
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
3M DP460EG and DP4XLEG also require a plunger to dispense.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Choose a Color | Each | |
3M Compounds—Extra Hard | ||||||||||||
DP270 | 1.64 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 000000 | |
DP270 | 6.8 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 00000 | |
DP270 | 13.5 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | Black | 00000000 | 000000 |
DP270 | 13.5 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | Clear | 00000000 | 000000 |
DP460EG | 1.69 | Thick Liquid | 110 min. | 7 days | 510 | Not Rated | 0° to 175° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Off-White | 00000000 | 00000 |
DP4XLEG | 1.69 | Thick Liquid | 5 hrs. | 7 days | 670 | Not Rated | -40° to 120° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Off-White | 00000000 | 00000 |
Mixer Nozzle for 6.8-oz. 3M Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 6.8-oz. 3M Cartridges | 0000000 | Each | 000000 |
Mixer Nozzle for 13.5-oz. 3M Cartridges | 00000000 | Each | 0000 |
Mixer Nozzle for 1.64-oz. and 1.69-oz. 3M Cartridges (Mixing Elements: 20) | 00000000 | Each | 0000 |
Plunger for 1.69-oz. 3M DP460EG Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 1.64-oz. and 1.69-oz. 3M Cartridges | 0000000 | Each | 000000 |
Mixer Nozzle for 1.64-oz. and 1.69-oz. 3M Cartridges (Mixing Elements: 16) | 0000000 | Each | 0000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges | 0000000 | Each | 0000 |