Voltage Voltage |
|---|
|
Battery Size Battery Size |
|---|
|
Battery Connection Type Battery Connection Type |
|---|
 | Snap On |
Battery Chemistry Battery Chemistry |
|---|
|
Battery Type Battery Type |
|---|
|
System of Measurement System of Measurement |
|---|
|
Manufacturer Equivalent Number ManufacturerEquivalent Number |
|---|
|
|
Capacity Capacity |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
For Battery Type For Battery Type |
|---|
|
Wire Connection Type Wire Connection Type |
|---|
 | Wire Leads |
 | Solder |
 | Quick- Disconnect Terminals |
Material Material |
|---|
|
|
Contact Type Contact Type |
|---|
|
Input Voltage Input Voltage |
|---|
|
Plug Type Plug Type |
|---|
|
Lithium Type Lithium Type |
|---|
|
About Battery Disposal
More
Disposable Batteries
These batteries hold more power than rechargeable batteries but must be replaced more frequently. When choosing a battery, use the capacity, measured in milliampere-hours, to compare among similar sizes. The higher the mA-hr. rating, the longer the battery should last.
Use alkaline and carbon zinc batteries in low-drain devices such as clocks and radios.
Lithium batteries are lightweight and long lasting. They work well in high-drain devices such as digital cameras.
| Battery Chemistry | Voltage | Battery Connection Type | Manufacturer Equivalent Number | Capacity, mA-hrs. | Pkg. Qty. | Pkg. | |
9V | |||||||
|---|---|---|---|---|---|---|---|
| Alkaline | 9 | Snap On | 4022, 522, 6AM6, 6LR61, MN1604 | 625 | 1 | 00000000 | 00000 |
| Alkaline | 9 | Snap On | 4022, 522, 6AM6, 6LR61, MN1604 | 625 | 12 | 00000000 | 00000 |
| Carbon Zinc | 9 | Snap On | 006PN, 1222, M9VSHD | 350 | 1 | 0000000 | 0000 |
| Carbon Zinc | 9 | Snap On | 006PN, 1222, M9VSHD | 350 | 12 | 0000000 | 00000 |
| Lithium | 9 | Snap On | 6122, DL1604, L522, LA522, LS9V | 1,200 | 1 | 0000000 | 00000 |
Rechargeable Batteries
Reduce battery costs by powering devices with rechargeable batteries. These batteries work well in high-drain devices such as digital cameras. When choosing a battery, use the capacity, measured in milliampere-hours, to compare among similar sizes. The higher the mA-hr. rating, the longer the battery should last.
Nickel cadmium (NiCad) batteries should be drained completely before recharging for maximum battery life.
Chargers cannot be sold to Canada due to import regulations.
Battery Chargers
Chargers cannot be sold to Canada due to import regulations.
For No. of Batteries | ||||||||
|---|---|---|---|---|---|---|---|---|
| AA, AAA, C, D | 9V | Charging Time, hrs. | Input Voltage | Plug Type | Cord Lg., ft. | Cannot Be Sold To | Each | |
| 4 | 1 | 2-10 | 120V AC | Two Prong | 6 | Canada | 0000000 | 000000 |
Battery Holders
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Batteries | Contact Type | Material | Wire Connection Type | Contact Material | Lg. | Wd. | Ht. | No. of | Dia. | Mounting Fasteners Included | Each | |
For 9V Batteries | ||||||||||||
Single Layout | ||||||||||||
| 1 | Snap | Nylon Plastic | Quick-Disconnect (0.187" and 0.205" Tab Widths) | Steel | 2.12" | 1.16" | 0.8" | 4 | 0.13" | No | 00000000 | 00000 |
| 1 | Snap | Aluminum | Solder Lugs | Steel | 1.9" | 1.13" | 0.812" | 4 | 0.13" | No | 0000000 | 0000 |
I-Shape with Single Layout | ||||||||||||
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (6" Lg., 24 Gauge) | Brass | 1.14" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (12" Lg., 24 Gauge) | Brass | 1.14" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
T-Shape with Single Layout | ||||||||||||
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (6" Lg., 24 Gauge) | Brass | 1.04" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (12" Lg., 24 Gauge) | Brass | 1.04" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
Enclosed Battery Holders
Holders have snap-on or screw-on covers to fully enclose and protect batteries.
For technical drawings and 3-D models, click on a part number.
| For No. of Batteries | Contact Type | Battery Layout | Material | Wire Connection Type | Contact Material | Cover Style | Lg. | Wd. | Ht. | Each | |
For 9V Batteries | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Snap | Single | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Brass | Snap On | 2.7" | 1.3" | 0.83" | 00000000 | 00000 |
Circuit Board Battery Holders
For technical drawings and 3-D models, click on a part number.
Circuit Board Battery Contacts
with Spring-Clip
Contact
For technical drawings and 3-D models, click on a part number.
| For Battery Size | Wd. | Ht. | Material | Pkg. Qty. | Pkg. | |
Solder Connection | ||||||
|---|---|---|---|---|---|---|
Spring-Clip Contact | ||||||
| AA, A, 9V | 0.2" | 0.545" | Tin-Nickel-Plated Steel | 10 | 0000000 | 00000 |
Battery Clips
Use these clips to secure batteries in a housing.
For technical drawings and 3-D models, click on a part number.
Retaining Pins for Battery Clips
Pins fit around battery clips to hold them closed and prevent batteries from coming loose.
| Manufacturer | For Battery Size | For Manufacturer Model No. | Material | Pkg. Qty. | Pkg. | |
| Keystone | AA, 9V | 91, 92, 95, 99, 100, 2915 | Stainless Steel | 10 | 0000000 | 00000 |
Battery Caps
Protect the connection point of 9-volt batteries with these caps.
| For Battery Size | Color | Material | Pkg. Qty. | Pkg. | |
| 9V | Black | Plastic | 10 | 0000000 | 00000 |
Battery-Life Testers
Check if it's time to replace your disposable batteries.
| For Battery Type | For Battery Size | Each | |
| Disposable | AA, AAA, C, D, 9V, All Button/Coin Cell Batteries | 0000000 | 000000 |
Battery Enclosures
For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.
For technical drawings and 3-D models, click on a part number.
For Cutout | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of AA Batteries | For No. of 9V Batteries | No. of Contacts | Ht. | Wd. | Dp. | Ht. | Wd. | Environment | Environmental Rating | Includes | Color | Specifications Met | Each | |
Nylon Plastic with Lift-Off Cover and Snap In Closure | ||||||||||||||
| 2 | 1 | 4 | 1 1/2" | 2 1/2" | 7/8" | 1 5/16" | 2 7/16" | Indoor | IP40 | Mounting Clips | Black | DIN EN 60529 | 0000000 | 000000 |
| 4 | 2 | 8 | 2 1/2" | 2 1/2" | 7/8" | 2 7/16" | 2 7/16" | Indoor | IP40 | Mounting Clips | Black | DIN EN 60529 | 0000000 | 00000 |
Hand-Held Enclosures with Battery Holder
A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.
Protective boots prevent damage to the enclosure and make it easy to grip. They have a built-in stand to keep the enclosure upright.
For technical drawings and 3-D models, click on a part number.
Enclosures | Protective Boots | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Environment | Material | Color | Specifications Met | Each | Ht. | Wd. | Choose a Color | Each | ||
| 3 3/4" | 2 3/8" | 1" | Indoor | ABS Plastic | Black | UL 94 HB | 000000 | 00000 | 4 1/2" | 3" | 0000000 | 000000 | |
| 4 1/2" | 2 3/4" | 1" | Indoor | ABS Plastic | Black | UL 94 HB | 000000 | 0000 | 5 1/2" | 3 1/4" | 0000000 | 00000 | |
| 5" | 2 3/4" | 1" | Indoor | ABS Plastic | Black | UL 94 HB | 000000 | 00000 | 5 1/2" | 3" | 0000000 | 00000 | |
| 5 3/4" | 3 5/8" | 1 1/4" | Indoor | ABS Plastic | Black | UL 94 HB | 000000 | 0000 | 7" | 4 1/4" | 0000000 | 00000 | |
| 7 1/2" | 4" | 1 1/4" | Indoor | ABS Plastic | Black | UL 94 HB | 000000 | 00000 | 9" | 4 1/2" | 0000000 | 00000 | |
Hand-Held Enclosures with Battery Holder and See-Through Cover
Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside. They take one 9V battery (not included). The battery slots in without opening the entire enclosure, which is convenient for devices that run through batteries quickly.
For technical drawings and 3-D models, click on a part number.
| Height | Width | Depth | Environment | Environmental Rating | Material | Cover Material | Color | Specifications Met | Each | |
| 2" | 4 3/8" | 3 1/4" | Indoor | IP40 | ABS Plastic | Polycarbonate Plastic | Black | UL 94 HB, UL 94 V-0 | 00000000 | 000000 |
| 2" | 5 5/8" | 3 1/4" | Indoor | IP40 | ABS Plastic | Polycarbonate Plastic | Black | UL 94 HB, UL 94 V-0 | 00000000 | 00000 |
| 2" | 6 7/8" | 4 7/8" | Indoor | IP40 | ABS Plastic | Polycarbonate Plastic | Black | UL 94 HB, UL 94 V-0 | 00000000 | 00000 |