Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED, CFL, halogen, and incandescent bulbs (sold separately), while others accept fewer kinds.

Styles 1, 3, 5, 7, and 8 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Styles 2, 4, and 6 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Style B work with LED, CFL, halogen, and incandescent bulbs (sold separately). Lights with a zinc housing are more impact resistant than those with an aluminum housing.

No need for wiring—these lights plug-in with a three-prong plug. Use these fixtures to illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to any angle to direct light where needed. Lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style B detect motion up to 70 feet away. They are compatible with LED, CFL, halogen, and incandescent bulbs (sold separately).

Hang these lights where you need them on the job site.

Styles L, M, and N are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550k33 is compatible with medium-base screw-in incandescent and LED bulbs. Styles L and M have a steel guard to protect the bulb. Style N has an impact-resistant plastic lens.

A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas.

Style A lights are compatible with medium-base, screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They have a plastic-coated steel guard to protect the bulb.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Styles A and B lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately). They have a zinc-plated steel guard to protect the bulb.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight. NEMA 4X is widely considered the standard NEMA rating. These lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses; they have a zinc-plated steel guard to protect them.

Because these lights have a reflector, they distribute light more evenly than other portable lights. A mounting clip at the base lets you attach them to nearby surfaces.

Style A and B are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Style C come with an LED bulb; however, are also compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and infrared bulbs.

Style D are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, infrared, and LED bulbss (sold separately).

The gooseneck arm on this light allows you to direct light exactly where it's needed. It has a reflector that distributes light more evenly than other portable lights. A mounting clip at the base lets you attach it to a nearby surface. This light comes with a CFL (compact fluorescent) bulb; it is also compatible with medium-base, screw-in halogen, incandescent, and LED bulbs (sold separately).

These lights swing out from the wall to illuminate loading docks and trailers.

Styles A-D are compatible with medium-base CFL (compact fluorescent), halogen, and incandescent bulbs (sold separately). Some also work with LED bulbs. All have a zinc-plated steel guard to protect the lens.

Replacement light heads come with a steel guard to protect the lens. Steel heads are stronger and more durable than plastic heads. Plastic heads don’t heat up as much as steel heads, and won’t dent as easily.