Get notified about equipment issues even when you aren't around your machines. These lights connect to your computer via Ethernet, allowing you to set up email alerts when there is a problem with a machine, server, or conveyor. The buzzer can emit both continuous and pulse tones—pulse tones alternate on/off to draw greater attention than continuous tones. Lights have an LED bulb for years of maintenance-free operation.

Bring light to areas that don't have electrical power service. These lights have an impact-resistant plastic lens to protect their LEDs. No need to swap out disposable batteries—just charge these flashlights up and they’re ready to go.

Style B are a good choice if you are working close to your light—their wide-angle lens disperses the light. They can also be used like a flashlight by turning on the bulb at the end of the light, which produces a narrow spot beam. Good for inspecting, they have a cool appearance that highlights white and blue tones.

Our brightest plug-in floodlights, these lights illuminate large worksites—about the size of a hockey rink. Rated IP68, they’re dust- and watertight enough to handle being temporarily submerged in water, so torrential downpours and snowstorms won’t be a problem. Tilt the heads and adjust the height of the stand to direct light where you need it.

Style A lights are also known as balloon lights—they cast light in all directions through a fabric diffuser to reach a diameter of 200 ft. For focused light, remove the diffuser. They’re lightweight, weighing just 45 lbs., so you can move them around your site. Yet they’re sturdy enough to withstand winds of 30 mph with the diffuser on and 60 mph with the diffuser off.

Style B lights have four heads that rotate and pivot individually, so you can aim the light up to 160 ft. in whatever direction you choose. Once you raise the lights, you can rotate the mast to direct light. They’re stable enough to stand firm in 45 mph winds thanks to their sturdy steel frame. A single person can maneuver them, even through doorways. You cannot tow these lights. They have a power outlet at the base to plug in a tool or link up a second light.

An extension cord (sold separately) is required to power Style B lights. If you’re powering only one, use a cord with a NEMA 5-15 plug. If you’re powering two of these lights on one circuit or plan to plug in a power tool, use a cord with a NEMA L5-20 plug to power the first light. The light has inlets for both plug types.