Use these versatile jacks for lifting, spreading, bending, pushing, and straightening.

Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it.

Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose.

Push or pry apart material with these rams by attaching them to a hydraulic pump.

Connect up to four rams and a gauge to a pump. Ram connections have flow-adjustment valves to adjust ram speed, or shut it off to temporarily hold a load.

Use these fittings with hydraulic hose.

This steel-reinforced hose has male threads.

Thread one of these plates onto your ram and use the four mounting holes to secure it in place.

Fit these compact jacks under low-height loads.

A swivel caster lets you reposition your load.

The turning bar gives you leverage to lift heavier loads than wrench-adjustable screw jacks.

Roll from job to job and under hard-to-reach places.

Turn the hand wheels to raise the load and tilt it up to 30° for a more ergonomic angle.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

For easy access to material, the tabletop rotates 360° and locks in any position.

A battery-operated motor and a hydraulic pump do the work for you; they lift loads with the push of a button.

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier.

The turntable rotates to reduce reaching.

A hydraulic pump and an air-driven motor do the work for you.

The screw adjustment allows you to make small changes to the height of your load.

Also known as engine cranes, a hydraulic hand pump raises and lowers the arm (boom) to lift items without the need for a hoist.

With no legs in front, these cranes let you lift close to your load. They are also known as engine cranes, and have a hydraulic hand pump that raises and lowers the arm (boom) to lift items without the need for a hoist.

Broad, strong Acme threads make these screw jacks better than ball screw jacks for heavy loads, intermittent positioning applications, and where vibration is present.

Add a flat mounting surface to to a screw jack to support loads.

Add a flat mounting surface to a ball screw jack to support loads.

Low-friction ball bearings allow these screw jacks to use half the power required by an Acme screw jack to lift the same load. Typically used as actuators, they run at higher speeds than Acme screw jacks.

For the most demanding environments, these all-stainless steel pallet trucks have the best corrosion resistance.

A lower fork height allows these trucks to work with low-clearance pallets. Hydraulic pumps let you easily raise and move pallets.

Move loads around your facility, then use the hydraulic pump to lift them to a comfortable working height.

Let these trucks do the lifting for you. A hydraulic pump raises and lowers loads at the touch of a button while a throttle controls forward and reverse speed.

A hydraulic pump powered by a rechargeable battery raises and lowers the load with the push of a button.

Crank a handle or pump a foot pedal to raise and lower loads.