We will reply to your message within an hour.
Choose from a variety of screwdriver, flat, conical, chisel, bevel, needle, and knife tips.
Solder with complete control over the temperature—these stations let you adjust as you go.
These irons come with a fixed temperature tip—to adjust the temperature, change out the tip.
These stations are ESD (electrostatic discharge) safe to protect sensitive components. The tip is a fixed temperature—change out the tip to adjust the temperature.
From electronics to metal sealing, these irons handle intermittent soldering jobs.
Use these irons for your high-volume jobs.
Combine a handle, a heating element, and a tip to create the iron you need.
These irons put an extra layer of cork insulation between your hand and the iron.
Ultra thin, these irons are for precise soldering in electronics applications.
These irons have a large tip for excellent heat transfer, making them ideal for running seams in sheet metal.
These guns heat up the instant you pull the trigger and cool down quickly when you let go.
Kits include a gun, tips for a variety of applications, solder, and a wrench.
Pull the trigger for instant heat; release it and the gun cools quickly.
A plier-style handpiece confines heat to only where it touches when you’re treating, brazing, and silver soldering small parts.
These irons run on AA batteries and are for intermittent use.
With the push of a button, these irons convert from a straight grip to a pistol grip with either a 45° or 90° head angle. Battery power and no cord means you can take them where you need them.
A rechargeable NiCad battery powers these irons.
Kits include an iron, tips for a variety of applications, a heat-shrink attachment, an ejector, and a cap.
Adjust the tip temperature to suit your application using a button control.
These cordless irons run on butane gas, so you don't have to recharge a battery between uses.
Kits include an iron, tips for a variety of applications, a stand, a sponge, and a cap.
These irons are continuous duty.
Traditionally used for sheet metal work, heat the heads of these coppers with an external flame source and they store enough heat to complete long joints.
Touch the tip of your soldering iron for a fast, accurate temperature reading. Within about five seconds, you'll know how hot the iron is, so you can decide whether it's ready for your particular soldering material and application.
These torches handle brazing and soldering, as well as heating jobs.
Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it.
The torch tip rotates 360° to put the heat exactly where you need it.
Tackle roofing and other heavy duty heating applications—these torches have a BTU output starting at nearly seven times the output of standard propane torches.
Connect these torches to a propane cylinder for light-duty flame applications.
These torches have approximately half the BTU output of standard propane torches for use in light duty applications.
Save time by quickly connecting and disconnecting your propane torch tips to get the right output for your job. Kits can also be used with Apachi, HPG, and propylene.
Get flame temperatures from these torches that are capable of cutting, welding, and brazing steel up to 3/16" thick.
This torch includes a standard solder tip as well as a heat tip for applications that require heat without an exposed flame.
Kits include a torch, a solder tip, a heat tip, a hot knife tip, a heat-shrink attachment, a foam cutter, a wire cutter, needle-nose pliers, 60/40 tin/lead solder, a sponge, and a case.
The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint.
Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.
This solder is commonly used in solder melting pots
With five rosin flux cores, this solder joins faster, uses less material, and transmits less heat than single-flux-core solder.
Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.
This flux leaves minimal residue so there's no cleanup.
This solder is commonly used in solder melting pots.
The high melting point prevents remelting when soldering successive joints with another solder.
Use this solder for general purpose applications.
Even as temperatures approach absolute zero, this indium solder remains soft and malleable, allowing it to form an airtight seal between metal and certain non-metal materials..
Made with indium this solder is soft and malleable—even as temperatures approach absolute zero—allowing this solder to form an airtight seal between metal and certain non-metal materials. Thanks to its ribbon shape, this solder is easier to use on large, flat areas than wire solder.
This solder meets NSF/ANSI Standard 61 for drinking water.
Without a flux core, this solder allows you to choose the flux that works best for your application.
The flux residue easily washes away with water.
The flux leaves minimal residue so there's no cleanup.
Composed of pure tin, this solder is safe for use with food service equipment.
This bismuth-tin solder has similar performance properties to lead solder, but is also safe for use in food-processing equipment and copper water pipes.
This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.
Flux is not required for this solder to form strong joints.
Fill this dispenser with the flux of your choice to prepare electrical assemblies and printed circuit boards for soldering.
Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.
This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.
With the strongest cleaning power, this flux is fully activated to clean and prepare electrical assemblies and printed circuit boards for soldering applications up to 840° F.
This flux has less cleaning action, but leaves the least amount of residue.
Use this flux for plumbing applications.
This flux is the fastest to remove from plumbing pipelines.
This flux causes solder to flow in a thin film to create joints using minimal solder.
Protect the solder joint from corrosion with this flux paste.
Fortified with tin, this flux protects nondrinking water pipes from oxidation, especially under temperatures up to 600° F.
Solder aluminum to itself, copper, or brass.
Often used to solder aluminum to difficult-to-solder metal such as stainless steel and nickel, this flux works in applications up to 800° F.
Prepare workpieces for low-temperature lead-free soldering. This flux leaves minimal residue, so there’s no cleanup required.
Keep your solder spools organized.
Also known as solder slugs, these pellets create strong, electrically conductive connections between battery terminal lugs and cable.
This remover is specifically designed to remove rosin and no-clean flux residue. It works well with both lead-free and tin/lead solders.
For applications such as printed circuit boards, switches, and heat sinks, these removers get rid of any residue left behind by no-clean flux.
Ignite your gas torch with these hands-free lighters—they rest on a bench or tabletop, leaving you free to hold solder, workpieces, and other tools.
Attach these installation tips to a soldering iron. The tips transfer heat from the soldering iron to the insert, softening the surrounding plastic. When the plastic cools, it solidifies around the insert to keep it secure.
Extract heat-set inserts by attaching these tips to a soldering iron. The tips transfer heat from the soldering iron to the insert, softening the surrounding plastic to loosen the insert so it can be removed.