For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Mount these bearings onto a hex shaft.

For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.

Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.

These bearings have twice as many contact points as angular-contact ball bearings.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

A bolt in each corner makes for a secure, even hold.

The tapered rollers in these bearings support large shafts at high static loads.