Coverage Coverage |
|---|
 |  |
| Arm | Full Hand |
 |  |
| Palm | Open Finger |
Application Application |
|---|
|
Garment Garment |
|---|
|
Cut Resistance Cut Resistance |
|---|
|
Sleeve Style Sleeve Style |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
For Use With For Use With |
|---|
|
About Cut-Resistant Gloves
More
About Glove Sizing
More
Cut-Protection Sleeves
Use these sleeves alone or with gloves to protect your arms when handling sharp objects. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the sleeve using a razor blade.
Kevlar aramid sleeves absorb moisture. Cut 13-yd. long sleeves to the length you need.
Dyneema sleeves are thinner, more breathable, and more form fitting than Kevlar sleeves.
Spectra/stainless steel sleeves are the most durable cut-resistant sleeves.
Polyester sleeves reduce the risk of cuts as well as punctures when handling sharp and pointed objects.
Use sleeves with knit cuffs for a secure fit. Sleeves with open cuffs are more convenient to put on and take off than other sleeves.
| Cut Resistance | Lg. | Cuff Style | Color | Size | Features | Specifications Met | Each | |
Standard | ||||||||
|---|---|---|---|---|---|---|---|---|
Dyneema Fabric | ||||||||
| ANSI Level A4 | 10" | Knit | Gray | One Size | __ | ANSI/ISEA 105 | 0000000 | 00000 |
| ANSI Level A4 | 14" | Knit | Gray | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
| ANSI Level A4 | 18" | Knit | Gray | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
Kevlar Aramid Fabric | ||||||||
| ANSI Level A2 | 13yd. | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 00000 |
| ANSI Level A4 | 10" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
| ANSI Level A4 | 14" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
| ANSI Level A4 | 18" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
Spectra/Stainless Steel Fabric Blend | ||||||||
| ANSI Level A7 | 10" | Knit | Gray | One Size | __ | ANSI/ISEA 105 | 0000000 | 00000 |
| ANSI Level A7 | 22" | Knit | Gray | One Size | __ | ANSI/ISEA 105 | 0000000 | 00000 |
With Thumb Slot | ||||||||
Kevlar Aramid Fabric | ||||||||
| ANSI Level A4 | 10" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
| ANSI Level A4 | 14" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
| ANSI Level A4 | 18" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
Polyester Fabric | ||||||||
| ANSI Level A7 | 9" | Open | Black | One Size | Spandex Hand | ANSI/ISEA 105 | 0000000 | 00000 |
With Thumb and Finger Slots | ||||||||
Kevlar Aramid Fabric | ||||||||
| ANSI Level A4 | 10" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
| ANSI Level A4 | 14" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
| ANSI Level A4 | 18" | Knit | Yellow | One Size | __ | ANSI/ISEA 105 | 0000000 | 0000 |
Cut-Protection Gloves
These gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.
Kevlar aramid gloves absorb moisture.
Polyester gloves are breathable yet abrasion resistant.
Gloves with open cuffs are more convenient to put on and take off than other gloves. Use gloves with knit cuffs for a secure fit.
Style C extend to the elbow to provide additional arm protection.
Style D gloves have textured, reinforced palms to reduce the risk of cuts as well as punctures when handling sharp and pointed objects. They provide additional arm protection up to the elbow.
Available Sizes | |
|---|---|
| Size | Glove Size |
| M | 8 |
| L | 9 |
| XL | 10 |
| 2XL | 11 |
Grip | Pair | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cut Resistance | Surface | Coverage | Pattern | Lg. | Cuff Style | Color | Features | Specifications Met | Choose a Size | 1-11 | 12-Up | |
Gloves with Sleeve | |||||||||||||
Kevlar Aramid Fabric | |||||||||||||
| C | ANSI Level A2 | __ | __ | __ | 18" | Knit | Yellow | __ | ANSI/ISEA 105 | 00000000 | 000000 | 000000 | |
| C | ANSI Level A2 | __ | __ | __ | 22" | Knit | Yellow | __ | ANSI/ISEA 105 | 00000000 | 00000 | 00000 | |
Silicone-Rubber Grip Polyester Fabric | |||||||||||||
| D | ANSI Level A9 | Textured | Palm | Criss Cross | 18" | Open | Gray | Reinforced Palm | ANSI/ISEA 105 | 000000 | 000000 | 00 | |
Welding Sleeves
Use these sleeves alone or with gloves to protect your arms. They shield your arms from welding sparks and spatter.
Leather sleeves are abrasion-resistant cowhide. Open cuffs are convenient to put on and take off. Fasten the wrist snap for a closer fit. Sleeves with an adjustable strap can be tightened around the upper arm to keep them in place.
Welding Gloves
Reinforced seams and fingertips prevent burn-through. Use these gloves to shield your hands from welding sparks and spatter.
Cowhide gloves balance durability and comfort.
Gloves with Kevlar threads have strengthened, flame-resistant seams.
18”, 21”, and 23” gloves have extra length for additional arm protection.
Style E have an adjustable strap for a tight, custom fit. Secure the strap by snapping it into place.
Style F and G have reinforced palms and wrists for improved wear resistance.
Leather Work Gloves
The all-leather design offers durability and wear resistance.
Cowhide gloves balance durability and comfort.
Style D extend just above the elbow for added arm coverage. They have a nylon mesh strip midway down the arm, which allows air to circulate comfortably while you work. An elastic cuff keeps them in place.
Sleeves
Protect your arm from stains, sparks, and abrasions. Use these sleeves alone or with gloves.
Cotton sleeves are comfortable, breathable, and form fitting. Cut 12-yd. long sleeves to the length you need.
Denim sleeves are more durable and abrasion resistant than cotton and cotton terry sleeves.
Heat-Protection Sleeves
Use these sleeves alone or with gloves to protect your arms from heat.
Kevlar aramid/fiberglass blend sleeves are abrasion resistant. Open cuffs are convenient to put on and take off. Fasten the wrist snap for a closer fit. Sleeves with an adjustable strap can be tightened around the upper arm to keep them in place.
Nomex aramid sleeves are breathable and cool down quickly after removal from a hot surface. They have knit cuffs for a secure fit.
| Lg. | Cuff Style | Color | Max. Temp., °F | For Heat Exposure Type | Features | Size | Pair | |
Kevlar Aramid/Fiberglass Fabric Blend | ||||||||
|---|---|---|---|---|---|---|---|---|
| 12" | Open, Snaps | Yellow | 600° | Direct | __ | One Size | 0000000 | 000000 |
| 18" | Open, Snaps | Yellow | 600° | Direct | Adjustable Strap | One Size | 0000000 | 00000 |
| 23" | Open, Snaps | Yellow | 600° | Direct | Adjustable Strap | One Size | 0000000 | 00000 |
Nomex Aramid Fabric | ||||||||
| 23" | Knit | Off-White | 1300° | Direct | __ | One Size | 000000 | 00000 |
Flame- and Heat-Protection Sleeves
Protect your arms against intermittent exposure to flames and radiant heat. Made from the same material used in race car drivers' fire suits, these sleeves won't ignite, burn, or melt. They’re lightweight, breathable, and moisture absorbing.
| Lg. | Color | Max. Temp., °F | For Heat Exposure Type | Size | Pair | |
CarbonX Fabric | ||||||
|---|---|---|---|---|---|---|
| 18" | Black | 2000° | Ambient | One Size | 0000000 | 000000 |
Flame- and Heat-Protection Gloves
Protect your hands from intermittent exposure to flames and radiant heat up to 2000° F. Made from the same material used in race car drivers' fire suits, these gloves won't ignite, burn, or melt. They are lightweight, breathable, and moisture absorbing.
| Lg. | Cuff Style | Color | Max. Temp., °F | For Heat Exposure Type | Glove Size | Size | Pair | |
CarbonX Fabric Gloves with Sleeve | ||||||||
|---|---|---|---|---|---|---|---|---|
| 20" | Knit | Black | 2000° | Ambient | 9 | L | 0000000 | 000000 |
Disposable Sleeves
Use these sleeves alone or with gloves to protect your arms.
Tyvek polyethylene sleeves are made of heat- and pressure-bonded olefin fibers that form a barrier that's soft yet strong and abrasion resistant. They resist liquid splashes, but are not recommended for continuous liquid exposure.
Kleenguard polypropylene sleeves are tear resistant and have three layers of fabric for more abrasion resistance than Tyvek polyethylene. The material is antistatic. It also resists liquid splashes, but is not recommended for continuous liquid exposure.
Tychem 2000 (formerly known as Tychem QC) sleeves are polyethylene coated for protection from inorganic acids and bases.
Welding Cape Sleeves
Protect your arms and chest when welding. Attach a bib (sold separately) to the snaps to protect your stomach.
Cotton is treated to protect against low radiant heat and minor sparks.
Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. There is a pocket on the right sleeve.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these cape sleeves.
Available Sizes | |
|---|---|
| Size | Chest Size |
| S | 36"/38" |
| M | 40"/42" |
| L | 44"/46" |
| XL | 48"/50" |
| 2XL | 52"/54" |
| 3XL | 56"/58" |