Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

The long sides are angled 75°.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block.

Evenly sand two surfaces at once.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

These sheets resist deterioriation when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A coating prevents dust and debris from building up on the abrasive surface.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

These assortments include a selection of sanding sponges with long-lasting diamond abrasive on one side. Flexible enough to sand around curves and in corners, they provide the comfort and control of a sanding block.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

Quickly attach, remove, and reuse.

Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

Cut to convenient sizes and shapes, these fit most sheet sanders.

Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.

Peel and stick to your file handle. When it’s time to change the sheet, peel it off.

A coating prevents dust and debris from building up on the abrasive surface.

Use these sheets with pole sanders.

The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.

Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flexible-edge quick-change discs.

Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.

Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes in the disc let you see the surface you’re sanding.

Fit these discs over your tool's arbor.

Holes in the disc let you see the surface you’re sanding.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

Fit these discs over your tool's arbor to sand masonry, ceramics, and composites.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

Holes allow dust removal when used with a vacuum sander.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

These discs have a long-lasting diamond abrasive.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.

These discs have a harder abrasive than standard flap sanding discs.

The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

A coating prevents dust and debris from building up on the abrasive surface.

Set at an angle and widely spaced, the flaps reach into corners.

Use with commercial floor buffing machines to sand wood floors and strip tape from concrete.

Blocks hold an adhesive-back sanding roll—cut off worn abrasive and pull out more as needed.

Made of foam, these blocks flex to sand around curves.

Access tight spots. These sticks are spring-loaded to hold a small sanding belt taut, but you can easily rotate the belt when it becomes worn.