Drain, Waste, and Vent ABS Pipe Fittings for Chemicals
These Schedule 40 fittings are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Fittings meet ASTM D2661, ASTM D3311, ASTM D3965, and ASTM F1498 specifications and testing requirements for material quality and product dimensions.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
- For Use With: Sodium Hydroxide
- Max. Temperature: See table
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
- For Use With: Sodium Hydroxide
- Maximum Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
Offset tees are also known as sanitary tees and eccentric tees. They have an offset branch so the line can drain. Use them for applications that require frequent cleaning and inspecting.
- For Use With: Sodium Hydroxide
- Maximum Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
Offset tees are also known as sanitary tees and eccentric tees. They have an offset branch so the line can drain. Use them for applications that require frequent cleaning and inspecting. Long offset tees are also known as long radius wyes.
- For Use With: Sodium Hydroxide
- Maximum Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
Inline tees are also known as branch tees. Offset tees are also known as sanitary tees and eccentric tees. They have an offset branch so the line can drain. Use them for applications that require frequent cleaning and inspecting.
Expansion Plugs for Cleanout Tees
Seal cleanout tees when testing your drain, waste, and vent systems for pressure and leaks—no need to inflate these plugs with an air compressor or hand pump. To install, insert the plug end into your pipe so the curved foot is on the bottom threads of the cleanout tee, then push down the handle to lock it into the foot. The foot has a two-stage release latch: lift the handle one notch to release the plug and allow liquid to drain slowly, then lift the handle again until the foot fully disengages to take out the plug.
For Pipe | Max. Back Pressure | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Size | ID | Air, psi | Water, ft. of head | O'all Ht. | Temp. Range, °F | Seal | Handle | For Use With | Each | |
| 2 | 2.067" | 65 | 150 | 9 1/2" | 32° to 120° | Natural Rubber | Steel | ABS Pipe, Cast Iron Pipe, PVC Pipe | 00000000 | 000000 |
| 3 | 3.068" | 65 | 150 | 11 3/4" | 32° to 120° | Natural Rubber | Steel | ABS Pipe, Cast Iron Pipe, PVC Pipe | 00000000 | 00000 |
| 4 | 4.026" | 65 | 150 | 13 1/2" | 32° to 120° | Natural Rubber | Steel | ABS Pipe, Cast Iron Pipe, PVC Pipe | 00000000 | 00000 |
| 6 | 6.065" | 35 | 80 | 18" | 32° to 120° | Natural Rubber | Steel | ABS Pipe, Cast Iron Pipe, PVC Pipe | 00000000 | 000000 |
| 8 | 7.981" | 20 | 40 | 19" | 32° to 120° | Natural Rubber | Steel | ABS Pipe, Cast Iron Pipe, PVC Pipe | 00000000 | 000000 |