Material Material | Show |
---|
|
Material Material | Hide |
---|
Shape Shape |
---|
![]() | ![]() |
Rod and Disc | Round Tube |
System of Measurement System of Measurement |
---|
|
Flexibility Flexibility |
---|
![]() | Semi- Flexible |
![]() | Semi-Rigid |
Performance Properties Performance Properties |
---|
|
Hardness Hardness |
---|
|
Friction Rating Friction Rating |
---|
|
Texture Texture |
---|
![]() | Smooth |
Impact Strength Rating Impact Strength Rating |
---|
|
Impact Strength Impact Strength |
---|
|
Clarity Clarity |
---|
![]() |
Opaque |
Flexural Modulus Flexural Modulus |
---|
|
Specifications Met Specifications Met |
---|
|
Fabrication Fabrication |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
More
Form these rods into parts that require protection from shock, such as rollers and bumpers. Made of ABS, they are easy to form, plus they’re more impact resistant than polycarbonate.
Dia. | Dia. Tolerance | Lengths, ft. | Choose a Color | Each | |
1/8" | -0.010" to 0.000" | 5 | 0000000 | 00000 | |
3/16" | -0.010" to 0.000" | 5 | 0000000 | 0000 | |
1/4" | 0.000" to 0.002" | 5 | 000000 | 0000 | |
3/8" | 0.000" to 0.002" | 5 | 000000 | 0000 | |
1/2" | 0.000" to 0.002" | 5 | 000000 | 00000 | |
Per Ft. | |||||
---|---|---|---|---|---|
5/8" | 0.000" to 0.002" | 000000 | 0000 | ||
3/4" | 0.000" to 0.002" | 000000 | 0000 | ||
7/8" | 0.000" to 0.002" | 0000000 | 0000 | ||
1" | 0.000" to 0.002" | 000000 | 0000 | ||
1 1/4" | 0.000" to 0.005" | 0000000 | 00000 | ||
1 1/2" | 0.000" to 0.005" | 000000 | 00000 | ||
1 3/4" | 0.000" to 0.005" | 000000 | 00000 | ||
2" | 0.000" to 0.005" | 000000 | 00000 | ||
2 1/2" | 0.000" to 0.030" | 0000000 | 00000 | ||
3" | 0.000" to 0.250" | 0000000 | 00000 | ||
3 1/2" | 0.000" to 0.250" | 0000000 | 00000 | ||
4" | 0.000" to 0.250" | 0000000 | 000000 | ||
5" | 0.000" to 0.250" | 0000000 | 000000 |
Slide wires and cords through these tubes for 360° protection from impact. ABS is easily thermoformed and provides more resistance to impact than polycarbonate. These tubes have an oversized OD and undersized ID to allow for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
Absorbing impact without cracking or breaking, these plastic pellets are molded into parts that endure bumps, scrapes, and falls. Use them with injection molders, 3D printers, and other molding equipment.
ABS pellets are easy to thermoform, have good impact resistance at low temperatures, and have more chemical resistance than those made of HIPS or polycarbonate. They’re also more impact resistant than HIPS pellets. Use them to make storage cases, tote trays, equipment housings, and protective gear.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Size, lbs. | Molding Temperature, °F | Melting Temperature, °F | Melt Flow Rate | Shrinkage | Hardness | Impact Strength | Tensile Strength | Clarity | Specifications Met | Each | |
ABS Plastic | ||||||||||||
Off-White | ||||||||||||
Pail | 7 | 145° to 185° | 400° to 460° | 35 g/10 min | 0.5%-0.8% | Rockwell R108 (Hard) | 5.5 ft.-lbs./in. (Excellent) | 6,500 psi (Good) | Opaque | FDA Compliant 21 CFR 177.1020 | 0000000 | 0000000 |
Cardboard Box | 50 | 145° to 185° | 400° to 460° | 35 g/10 min | 0.5%-0.8% | Rockwell R108 (Hard) | 5.5 ft.-lbs./in. (Excellent) | 6,500 psi (Good) | Opaque | FDA Compliant 21 CFR 177.1020 | 0000000 | 000000 |