Material Material |
|---|
|
Specifications Met Specifications Met |
|---|
|
Shape Shape |
|---|
 | Round Tube |
 | Straight |
 | 270° Bend |
System of Measurement System of Measurement |
|---|
|
Color Color |
|---|
 | Black |
Flexibility Flexibility |
|---|
|
Performance Properties Performance Properties |
|---|
|
Clarity Clarity |
|---|
|
Impact Strength Rating Impact Strength Rating |
|---|
|
For Use With For Use With |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Thermal Stability Thermal Stability |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Friction Rating Friction Rating |
|---|
|
Flexural Modulus Flexural Modulus |
|---|
|
Fabrication Fabrication |
|---|
|
Density Density |
|---|
|
About Plastic
More
About Heat-Shrink Tubing
More
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Drain, Waste, and Vent ABS Pipe for Chemicals
- For Use With: Sodium Hydroxide
- Max. Temperature: 140° F
- Fittings: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
Use this Schedule 40 pipe as an economical option for gravity-flow chemical waste systems. Pipe is ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Connect to unthreaded female socket-connect fittings using ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Each | |
5 ft. | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | ABS Plastic | Black | 00000000 | 000000 |
| 2 | 2 3/8" | 2.067" | 0.154" | ABS Plastic | Black | 00000000 | 00000 |
| 3 | 3 1/2" | 3.068" | 0.216" | ABS Plastic | Black | 00000000 | 00000 |
10 ft. | |||||||
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | ABS Plastic | Black | 00000000 | 00000 |
| 2 | 2 3/8" | 2.067" | 0.154" | ABS Plastic | Black | 00000000 | 00000 |
| 3 | 3 1/2" | 3.068" | 0.216" | ABS Plastic | Black | 00000000 | 00000 |
| Pipe Cement (8-oz. Can) | 00000000 | Each | 00000 |
Drain, Waste, and Vent ABS Pipe Fittings for Chemicals
- For Use With: Sodium Hydroxide
- Max. Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
These Schedule 40 fittings are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Fittings meet ASTM D2661, ASTM D3311, ASTM D3965, and ASTM F1498 specifications and testing requirements for material quality and product dimensions.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
Impact-Resistant Easy-to-Form ABS Tubes
- Color: Black
- Max. Temperature: 140° F
- Tensile Strength: 4,200-5,100 psi (Poor)
- Impact Strength: 6.3-7.7 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R101-R109 (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94HB
Slide wires and cords through these tubes for 360° protection from impact. ABS is easily thermoformed and provides more resistance to impact than polycarbonate. These tubes have an oversized OD and undersized ID to allow for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
Low-Smoke Flame-Retardant Heat-Shrink Tubing
- Material: Polyolefin Plastic
- Shrink Ratio: 3:1
- Dielectric Strength: 250 V/mil
- Shrink Temperature: 250° F
- Temperature Range: -65° to 230° F
- American Bureau of Shipping, MIL-C-24643
Also known as halogen-free tubing, this tubing meets MIL-C-24643 for minimal emission of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels. It also has a flame-retardant additive that makes it combustion resistant and minimizes the spread of flames.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | 1/2 ft. Lg. | 4 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | ||
| 0.3" | 0.1" | 0.06" | Black | 0000000 | 00000 | 0000000 | 000000 |
| 0.4" | 0.15" | 0.06" | Black | 0000000 | 0000 | 0000000 | 00000 |
| 0.75" | 0.22" | 0.08" | Black | 0000000 | 0000 | 0000000 | 00000 |
| 1.1" | 0.38" | 0.11" | Black | 0000000 | 00000 | 0000000 | 00000 |
| 1.5" | 0.5" | 0.12" | Black | 0000000 | 00000 | 0000000 | 00000 |
| 2" | 0.75" | 0.12" | Black | 0000000 | 00000 | 0000000 | 000000 |
| 3" | 1.25" | 0.16" | Black | 0000000 | 00000 | 0000000 | 000000 |