Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

A silicone additive gives this material a self-lubricating surface that reduces friction and extends the life of your parts.

This material prevents the buildup of static charges.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This material has tighter tolerances than standard 304 stainless steel.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

This material has tighter tolerances than standard 303 stainless steel.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.

One side of these sheets is polished to either a brushed or mirror-like finish.

Stronger and more corrosion resistant than 316 stainless steel, Nitronic 50 is especially well-suited for use as shafts and fixtures in marine environments.

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

Also known as Project 70+, this material machines faster with less wear on cutting tools than standard 17-4 PH stainless steel.

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

The width and thickness are oversized for finishing to your exact requirements.

Precision ground on the top and bottom to a tight tolerance.

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

Also called flat stock, these precision-ground bars are held to tight thickness and width tolerances.

Suitable for making molds, 420 stainless steel is a hard, wear-resistant material that can be finely polished to a very smooth surface.

The titanium content of 321 stainless steel preserves corrosion resistance around weld points.

Able to withstand temperatures up to 2100° F, 330 stainless steel is widely used as components for industrial furnaces, gas turbines, and boilers. It resists cracking when exposed to heating and cooling cycles.

These rod sets are supplied in a metal index case with fold-out panels.

Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.

These bars are precision ground to a tight thickness tolerance.

Also known as cobalt steel, this M42 tool steel maintains its hardness in high-speed cutting applications that generate intense heat. Use it to make tools for cutting extremely hard materials.

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

The thickness, length, and width are oversized for finishing to your exact requirements.

An oversized diameter allows for finishing to your exact requirements.

An oversized diameter allows for finishing to your exact requirements.

These precision-ground sheets and bars are held to a tight thickness tolerance.

All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.

The thickness, length, and width are oversized for finishing to your exact requirements.

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

The diameter on these rods is precision ground while the straightness is held to a strict tolerance, so they're ready for turning in a lathe.

Also known as flat stock, these bars have an oversized thickness, length, and width for finishing to your exact requirements.

These rods and discs are precision ground to offer tighter tolerances than standard 6061 rods and discs.

Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5.

Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom.

These rods are precision ground and held to a strict straightness tolerance, so they’re ready for turning in a lathe.

One side of these sheets is painted in your choice of gloss color, while the other side is painted gloss white.

These rods are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.

Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance.

Also known as flat stock, the thickness on these sheets and bars is held to a tight tolerance.

These sheets and bars are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.

The thickness is oversized for finishing to your exact requirements.

Combining strength with weldability and formability, A572 alloy steel is an economical choice for structural components, such as channels, beams, and framing. It has a low carbon content, making it easy to weld with a variety of welding methods.

Also known as weathering steel, this high-strength steel develops a thin layer of rust over time in outdoor environments that protects the inner steel from corrosion.

In addition to good corrosion resistance, the nickel coating provides better wear resistance than the zinc-galvanized coating.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

A silver-filled resin coating on one side of these sheets protects from degradation caused by bacteria and fungi.

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

Even in low temperatures, A516 carbon steel resists breaking upon impact. Also known as pressure-vessel-quality (PVQ) steel, it is mostly used for boilers, storage tanks, and pressure vessels.

Also known as blue-tempered steel.

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.