Diameter Diameter |
|---|
Shape Shape |
|---|
 |  |
| Rod and Disc | Round Tube |
Performance Properties Performance Properties |
|---|
|
Specifications Met Specifications Met |
|---|
For Use With For Use With |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Friction Rating Friction Rating |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Flexural Modulus Flexural Modulus |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Dielectric Strength Dielectric Strength |
|---|
|
Impact Strength Impact Strength |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Plastic
More
Wear-Resistant Easy-to-Machine Acetal Rods and Discs
White
Black
- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 9,135-9,700 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 176.170, FDA Compliant 21 CFR 177.2470, NSF/ANSI 51, NSF/ANSI 61, UL 94 HB
Made of naturally slippery acetal copolymer, these rods and discs are an economical alternative to Delrin® acetal resin. They offer similar wear resistance and are equally resistant to expanding when exposed to heat and moisture. They can be machined to close tolerances and are often used to make precision gears, bushing, bearings, and rollers.
For technical drawings and 3-D models, click on a part number.
Rods
White | Black | |||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Lengths, ft. | Each | Each | ||
| 1/8" | 0.000" to 0.003" | 4 | 0000000 | 00000 | 000000 | 00 |
| 3/16" | 0.000" to 0.003" | 4 | 00000000 | 0000 | 00000000 | 00000 |
| 1/4" | 0.000" to 0.003" | 4 | 00000000 | 0000 | 00000000 | 0000 |
| 5/16" | 0.000" to 0.003" | 4 | 00000000 | 0000 | 00000000 | 0000 |
| 3/8" | 0.000" to 0.003" | 4 | 00000000 | 0000 | 00000000 | 0000 |
| 7/16" | 0.000" to 0.003" | 4 | 00000000 | 0000 | 00000000 | 0000 |
| 1/2" | 0.000" to 0.003" | 4 | 00000000 | 0000 | 00000000 | 0000 |
| 9/16" | 0.000" to 0.003" | 4 | 00000000 | 00000 | 00000000 | 00000 |
| 5/8" | 0.000" to 0.003" | 4 | 00000000 | 00000 | 00000000 | 00000 |
| 3/4" | 0.000" to 0.003" | 4 | 00000000 | 00000 | 00000000 | 00000 |
| 4" | 0.000" to 0.250" | 1 | 00000000 | 00000 | 00000000 | 00000 |
| 4 1/2" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 5" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 5 1/2" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 6" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 6 1/2" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 7" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 7 1/2" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 8" | 0.000" to 0.250" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 9" | 0.000" to 0.300" | 1 | 00000000 | 000000 | 00000000 | 000000 |
| 10" | 0.000" to 0.300" | 1 | 00000000 | 000000 | 00000000 | 000000 |
White | Black | |||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Lengths, ft. | Per Ft. | Per Ft. | ||
| 7/8" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 0000 | 00000000 | 0000 |
| 1 1/4" | 0.000" to 0.005" | 1, 2, 3, 4 | 00000000 | 0000 | 00000000 | 00000 |
| 1 1/2" | 0.000" to 0.005" | 1, 2, 3, 4 | 00000000 | 00000 | 00000000 | 00000 |
| 1 3/4" | 0.000" to 0.005" | 1, 2, 3, 4 | 00000000 | 00000 | 00000000 | 00000 |
| 2" | 0.000" to 0.005" | 1, 2, 3, 4 | 00000000 | 00000 | 00000000 | 00000 |
| 2 1/4" | 0.000" to 0.015" | 1, 2, 3, 4 | 00000000 | 00000 | 00000000 | 00000 |
| 2 1/2" | 0.000" to 0.015" | 1, 2, 3, 4 | 00000000 | 00000 | 00000000 | 00000 |
| 3" | 0.000" to 0.250" | 1, 2 | 00000000 | 00000 | 00000000 | 00000 |
| 3 1/2" | 0.000" to 0.250" | 1, 2 | 00000000 | 00000 | 00000000 | 00000 |
Discs
White | Black | ||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Each | Each | ||
3" Lg. | |||||
| 3" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 4" | 0.000" to 0.250" | 0000000 | 00000 | 00000000 | 00000 |
| 5" | 0.000" to 0.250" | 0000000 | 00000 | 00000000 | 00000 |
| 6" | 0.000" to 0.250" | 0000000 | 00000 | 00000000 | 00000 |
| 7" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 8" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 9" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 10" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
6" Lg. | |||||
| 3" | 0.000" to 0.250" | 0000000 | 00000 | 00000000 | 00000 |
| 4" | 0.000" to 0.250" | 0000000 | 00000 | 00000000 | 00000 |
| 5" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 6" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 7" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 8" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 9" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 10" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
9" Lg. | |||||
| 3" | 0.000" to 0.250" | 0000000 | 00000 | 00000000 | 00000 |
| 4" | 0.000" to 0.250" | 0000000 | 00000 | 00000000 | 00000 |
| 5" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 6" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 7" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 8" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 9" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
| 10" | 0.000" to 0.250" | 0000000 | 000000 | 00000000 | 000000 |
Wear-Resistant Easy-to-Machine Acetal Tubes
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 6,400-9,500 psi (Good)
- Impact Strength: 1-1.8 ft.-lbs./in. (Poor)
- Hardness: Rockwell M50-M90 (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 HB, FDA Compliant 21 CFR 177.2470
These naturally slippery acetal copolymer tubes offer similar wear resistance to Delrin® acetal but at an economical price. Use them to make gears, bearings, and bushings. The OD is oversized and the ID is undersized for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
Oversized Tubes
| OD | ID | Lengths, ft. | Each | |
1/16" Wall Thick. | ||||
|---|---|---|---|---|
| 1/4" | 1/8" | 5 | 0000000 | 00000 |
| Per Ft. | ||||
| 5/8" | 1/2" | 0000000 | 0000 | |
1/8" Wall Thick. | ||||
| 1/2" | 1/4" | 0000000 | 0000 | |
| 5/8" | 3/8" | 0000000 | 0000 | |
| 3/4" | 1/2" | 0000000 | 0000 | |
| 1 1/4" | 1" | 0000000 | 00000 | |
3/16" Wall Thick. | ||||
| 5/8" | 1/4" | 0000000 | 0000 | |
1/4" Wall Thick. | ||||
| 3/4" | 1/4" | 0000000 | 0000 | |
| 1" | 1/2" | 0000000 | 00000 | |
| 1 1/4" | 3/4" | 0000000 | 00000 | |
| 1 1/2" | 1" | 0000000 | 00000 | |
| 2" | 1 1/2" | 0000000 | 00000 | |
Slippery Wear-Resistant Easy-to-Machine Acetal Copolymer
- Color: Blue or Red
- Temperature Range: -50° to 180° F
- Tensile Strength:
Blue: 7,600 psi (Good)
Red: 5,900 psi (Good) - Impact Strength: 0.54 ft.-lbs./in. (Poor)
- Hardness:
Blue: Rockwell M81 (Hard)
Red: Rockwell M63 (Hard) - For Use Outdoors: No
- Specifications Met: UL 94 HB
A silicone additive gives these rods a self-lubricating surface that reduces friction and extends the life of your parts.
Blue is also known as Turcite A; it is stronger than red, making it a good choice for heavier loads at moderate speeds.
Red is also known as Turcite X; it is more slippery than blue, making it suitable for low-load applications at high speeds.
For technical drawings and 3-D models, click on a part number.
Blue | Red | |||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Lengths, ft. | Per Ft. | Per Ft. | ||
| 1/4" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 000000 | 0000000 | 000000 |
| 3/8" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 00000 |
| 1/2" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 00000 |
| 5/8" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 00000 |
| 3/4" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 00000 |
| 1 1/4" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 00000 |
| 1 1/2" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 00000 |
| 1 3/4" | 0.000" to 0.010" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 00000 | 0000000 | 000000 |
| 2" | 0.000" to 0.250" | 1, 2, 3, 4, 5, 6, 7, 8 | 0000000 | 000000 | 0000000 | 000000 |
| 2 1/2" | 0.000" to 0.250" | 1, 2, 3, 4 | 0000000 | 000000 | 0000000 | 000000 |
| 3" | 0.000" to 0.250" | 1, 2, 3, 4 | 0000000 | 000000 | 0000000 | 000000 |
| 3 1/2" | 0.000" to 0.250" | 1, 2, 3, 4 | 0000000 | 000000 | 0000000 | 000000 |
Antistatic Wear-Resistant Easy-to-Machine Acetal Rods
- Color: Off-White
- Temperature Range: -20° to 180° F
- Tensile Strength: 5,000-6,400 psi (Good)
- Impact Strength: 1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 HB
When static is a concern, machine your conveyor components, rollers, and other moving parts from these antistatic acetal copolymer rods. These rods have a naturally slippery, wear-resistant surface. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. They’re also excellent electrical insulators.
For technical drawings and 3-D models, click on a part number.