Search Results
Thickness Thickness |
|---|
|
|
|
Performance Properties Performance Properties |
|---|
|
Specifications Met Specifications Met |
|---|
|
Friction Rating Friction Rating |
|---|
|
For Use With For Use With |
|---|
Hardness Hardness |
|---|
|
Flexural Modulus Flexural Modulus |
|---|
|
Density Density |
|---|
|
Dielectric Strength Dielectric Strength |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Impact Strength Impact Strength |
|---|
|
Environment Environment |
|---|
|
Filler Material Filler Material |
|---|
|
About Plastic
More
Wear-Resistant Easy-to-Machine Delrin®
Acetal Resin Sheets, Bars, and Strips
These sheets, bars, and strips resist expanding when exposed to heat and moisture, so they can be easily machined to close tolerances. They also have a naturally slippery, wear-resistant surface. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
Tight-tolerance bars are consistently flat, square, and parallel on all six sides.
White sheets, bars, and strips are FDA compliant for contact with food.
Sheets
- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met:
White: ASTM D6100, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51, NSF/ANSI 61
Black: ASTM D6100
White | Black | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
6" × 6" | |||||
| 1/4" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
| 1/2" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
| 5/8" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
| 3/4" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 0" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/4" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/2" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 1 3/4" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 2" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 2 1/4" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 2 1/2" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 2 3/4" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 3" | 0" to 0.05" | 00000000 | 00000 | 00000000 | 00000 |
| 4" | 0" to 0.125" | 00000000 | 00000 | 00000000 | 000000 |
12" × 12" | |||||
| 1/32" | -0.003" to 0.003" | 00000000 | 0000 | 00000000 | 0000 |
| 3/64" | -0.003" to 0.003" | 00000000 | 0000 | 00000000 | 0000 |
| 1/16" | -0.002" to 0.005" | 0000000 | 0000 | 00000000 | 00000 |
| 5/64" | -0.002" to 0.005" | 00000000 | 00000 | 00000000 | 00000 |
| 3/32" | -0.004" to 0.006" | 0000000 | 00000 | 00000000 | 00000 |
| 7/64" | -0.004" to 0.006" | 00000000 | 00000 | 00000000 | 00000 |
| 1/8" | -0.005" to 0.005" | 0000000 | 00000 | 00000000 | 00000 |
| 3/16" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 1/4" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 3/8" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 1/2" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 5/8" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 3/4" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 1" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 000000 |
| 1 1/4" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 1 1/2" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 1 3/4" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 2" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 2 1/4" | 0" to 0.05" | 00000000 | 000000 | 00000000 | 000000 |
| 2 1/2" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 2 3/4" | 0" to 0.05" | 00000000 | 000000 | 00000000 | 000000 |
| 3" | 0" to 0.05" | 00000000 | 000000 | 00000000 | 000000 |
| 4" | 0" to 0.125" | 00000000 | 000000 | 00000000 | 000000 |
24" × 24" | |||||
| 1/32" | -0.003" to 0.003" | 00000000 | 00000 | 00000000 | 00000 |
| 3/64" | -0.003" to 0.003" | 00000000 | 00000 | 00000000 | 00000 |
| 1/16" | -0.002" to 0.005" | 0000000 | 00000 | 00000000 | 00000 |
| 5/64" | -0.002" to 0.005" | 00000000 | 00000 | 00000000 | 00000 |
| 3/32" | -0.004" to 0.006" | 0000000 | 00000 | 00000000 | 00000 |
| 7/64" | -0.004" to 0.006" | 00000000 | 00000 | 00000000 | 00000 |
| 1/8" | -0.005" to 0.005" | 0000000 | 00000 | 00000000 | 00000 |
| 3/16" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 1/4" | 0" to 0.025" | 0000000 | 00000 | 00000000 | 00000 |
| 3/8" | 0" to 0.025" | 0000000 | 000000 | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 0000000 | 000000 | 00000000 | 000000 |
| 5/8" | 0" to 0.025" | 0000000 | 000000 | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 0000000 | 000000 | 00000000 | 000000 |
| 1" | 0" to 0.025" | 0000000 | 000000 | 00000000 | 000000 |
| 1 1/4" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 1 1/2" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 1 3/4" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 2" | 0" to 0.05" | 0000000 | 000000 | 00000000 | 000000 |
| 2 1/4" | 0" to 0.05" | 00000000 | 000000 | 00000000 | 000000 |
| 2 1/2" | 0" to 0.05" | 00000000 | 000000 | 00000000 | 000000 |
| 2 3/4" | 0" to 0.05" | 00000000 | 000000 | 00000000 | 000000 |
| 3" | 0" to 0.05" | 00000000 | 000000 | 00000000 | 000000 |
| 4" | 0" to 0.125" | 00000000 | 000000 | 00000000 | 00000000 |
Bars
- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met:
White: ASTM D6100, FDA Compliant 21 CFR 177.2480
Black: ASTM D6100
White | Black | ||||
|---|---|---|---|---|---|
| Wd. | Lengths, ft. | Per Ft. | Per Ft. | ||
1/4" Thick. (0" to 0.025") | |||||
| 1/4" | 1, 2, 3, 4 | 0000000 | 00000 | 0000000 | 00000 |
5/16" Thick. (0" to 0.025") | |||||
| 5/16" | 1, 2, 3, 4 | 0000000 | 0000 | 0000000 | 0000 |
3/8" Thick. (0" to 0.025") | |||||
| 3/8" | 1, 2, 3, 4 | 0000000 | 0000 | 0000000 | 0000 |
1/2" Thick. (0" to 0.025") | |||||
| 1/2" | 1, 2, 3, 4 | 0000000 | 0000 | 0000000 | 0000 |
5/8" Thick. (0" to 0.025") | |||||
| 5/8" | 1, 2, 3, 4 | 0000000 | 0000 | 0000000 | 0000 |
3/4" Thick. (0" to 0.025") | |||||
| 3/4" | 1, 2, 3, 4 | 0000000 | 0000 | 0000000 | 0000 |
1" Thick. (0" to 0.025") | |||||
| 1" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
1 1/4" Thick. (0" to 0.025") | |||||
| 1 1/4" | 1, 2, 3, 4 | 0000000 | 00000 | 0000000 | 00000 |
1 1/2" Thick. (0" to 0.025") | |||||
| 1 1/2" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
1 3/4" Thick. (0" to 0.025") | |||||
| 1 3/4" | 1, 2, 3, 4 | 0000000 | 00000 | 0000000 | 00000 |
2" Thick. (0" to 0.05") | |||||
| 2" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
2 1/2" Thick. (0" to 0.05") | |||||
| 2 1/2" | 1, 2, 3, 4 | 0000000 | 00000 | 00000000 | 00000 |
3" Thick. (0" to 0.05") | |||||
| 3" | 1, 2, 3, 4 | 0000000 | 00000 | 0000000 | 00000 |
4" Thick. (0" to 0.125") | |||||
| 4" | 1, 2, 3, 4 | 0000000 | 000000 | 0000000 | 000000 |
Tight-Tolerance Bars
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6100, FDA Compliant 21 CFR 177.2480
Slippery Wear-Resistant Easy-to-Machine
Delrin® Acetal AF Resin Sheets and Strips
The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. These sheets and strips resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Fabricate them into pump components, gears, and bearings. Delrin® acetal resin is also known as acetal homopolymer.
Sheets
- Color: Brown
- Temperature Range: -40° to 185° F
- Tensile Strength: 7,690-8,100 psi (Good)
- Impact Strength: 0.7-1 ft.-lbs./in. (Poor)
- Hardness: Rockwell R115-R118 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6778, UL 94HB
| Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
|---|---|---|---|
| 1/8" | -0.005" to 0.005" | 00000000 | 000000 |
| 1/4" | 0" to 0.025" | 00000000 | 00000 |
| 3/8" | 0" to 0.025" | 00000000 | 00000 |
| 1/2" | 0" to 0.025" | 00000000 | 00000 |
| 5/8" | 0" to 0.025" | 00000000 | 00000 |
| 3/4" | 0" to 0.025" | 00000000 | 00000 |
| 1" | 0" to 0.025" | 00000000 | 000000 |
12" × 12" | |||
| 1/8" | -0.005" to 0.005" | 00000000 | 00000 |
| 1/4" | 0" to 0.025" | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 5/8" | 0" to 0.025" | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 00000000 | 000000 |
| 1" | 0" to 0.025" | 00000000 | 000000 |
24" × 24" | |||
| 1/8" | -0.005" to 0.005" | 00000000 | 000000 |
| 1/4" | 0" to 0.025" | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 5/8" | 0" to 0.025" | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 00000000 | 00000000 |
| 1" | 0" to 0.025" | 00000000 | 00000000 |
Rigid Glass-Filled Wear-Resistant
Easy-to-Machine Delrin® Acetal Resin Sheets
- Color: White
- Temperature Range: -40° to 185° F
- Tensile Strength: 7,700 psi (Good)
- Impact Strength: 0.9 ft.-lbs./in. (Poor)
- Hardness: Rockwell M87 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6100, UL 94 HB
A glass-fiber filler makes these naturally slippery, wear-resistant sheets more rigid than standard Delrin® acetal resin sheets. They resist expanding when exposed to heat and moisture resistant, so they can be machined to close tolerances. Use them to make manifolds, impellers, and other parts that require rigidity. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
V-Belts
