McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    25 Products

    Submersible Anchoring Adhesives for Concrete

    When concrete is saturated with or submerged in water, use these epoxies to permanently set threaded rods, studs, and rebar. They form a weather-resistant chemical bond that seals out moisture and resists vibration and dynamic loads better than mechanical anchors. Warning: Allowable pull-out strength is 25% of ultimate values or less, as required by building authorities. Use a mixer nozzle and dispensing gun (dispensing gun sold separately) to simultaneously mix and dispense adhesive.
    Cartridge
    Image of Product. 9.5 fl. oz.. Front orientation. Anchoring Adhesives. Submersible Anchoring Adhesives for Concrete, Cartridge, 9.5 fl. oz. Container.
    Image of Product. 28 fl. oz.. Front orientation. Anchoring Adhesives. Submersible Anchoring Adhesives for Concrete, Cartridge, 28 fl. oz. Container.

    9.5 fl. oz.

    28 fl. oz.

    Container
    Size, fl. oz.
    Begins to
    Harden
    Reaches Full
    Strength, min.
    No. of 1/2" Dia. Rods Set at
    4 1/2" Installation Dp.
    Ultimate Pull-Out Strength (in 4,000 psi Concrete)
    Mix
    Ratio
    Consistency
    Temp. Range,
    ° F
    Color
    Each
    9.55 min. @ 70° F4525 in 9/16" Dia. Hole10,900 lbf—3/8" Diameter Threaded Rod × 3 3/8" Installation Depth
    17,100 lbf—1/2" Diameter Threaded Rod × 4 1/2" Installation Depth
    26,500 lbf—5/8" Diameter Threaded Rod × 5 5/8" Installation Depth
    29,500 lbf—3/4" Diameter Threaded Rod × 6 3/4" Installation Depth
    44,500 lbf—7/8" Diameter Threaded Rod × 7 7/8" Installation Depth
    48,000 lbf—1" Diameter Threaded Rod × 9" Installation Depth
    56,500 lbf—1 1/4" Diameter Threaded Rod × 11 1/4" Installation Depth    		10:1Paste15 to 110Gray7498A55000000
    285 min. @ 70° F4575 in 9/16" Dia. Hole10,900 lbf—3/8" Diameter Threaded Rod × 3 3/8" Installation Depth
    17,100 lbf—1/2" Diameter Threaded Rod × 4 1/2" Installation Depth
    26,500 lbf—5/8" Diameter Threaded Rod × 5 5/8" Installation Depth
    29,500 lbf—3/4" Diameter Threaded Rod × 6 3/4" Installation Depth
    44,500 lbf—7/8" Diameter Threaded Rod × 7 7/8" Installation Depth
    48,000 lbf—1" Diameter Threaded Rod × 9" Installation Depth
    56,500 lbf—1 1/4" Diameter Threaded Rod × 11 1/4" Installation Depth    		10:1Paste15 to 110Gray7498A5600000
    Accessories and Replacements for Anchoring Adhesives
    Each
    Dispensing Gun for 9.5 fl. oz. Cartridges76015T13000000
    Dispensing Gun for 28 fl. oz. Cartridges7498A58000000
    Replacement Mixer Nozzle for 9.5 fl. oz. Cartridges7498A1150000
    Replacement Mixer Nozzle for 28 fl. oz. Cartridges7498A570000

    Mesh Anchors for Hollow Block and Brick

    Image of ProductInUse. Front orientation. Anchors. Mesh Anchors for Hollow Block and Brick.
    Image of Product. Front orientation. Anchors. Mesh Anchors for Hollow Block and Brick.
    Create a secure connection that withstands vibration better than any of our other anchors for block and brick. The mesh on these anchors grips adhesive (sold separately), preventing it from running into the cavities of hollow block and brick to secure threaded rods or screws. To achieve the stated strengths, you must use the adhesive listed. A good option for outdoor use, these anchors are made of 18-8 stainless steel to resist rusting while your adhesive seals out moisture.
    To install, first fill the mesh anchor with adhesive and press it into a drilled hole. Then, press the tab against your block to hold the anchor in place, and insert a threaded rod or screw. The rod or screw will push the adhesive out of the mesh, forming a plug that keeps the rod or screw in place once the adhesive dries. Once installed, the rod or screw can’t be removed.
    Dia.
    Ultimate
    Strength, lbf
    For
    Rod
    For
    Hole
    Lg.
    Material
    Pull-Out
    Shear
    Each
    1/4"3/8"2"18-8 Stainless Steel1,5501,90097178A11000000
    3/8"1/2"3 1/2"18-8 Stainless Steel1,6602,07097178A1200000
    1/2"5/8"3 1/2"18-8 Stainless Steel2,4504,46097178A1300000
    5/8"3/4"4 1/2"18-8 Stainless Steel2,5405,04097178A1400000
    Anchoring Adhesives
    Container
    Size, fl. oz.
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Mix
    Ratio
    Temp. Range,
    ° F
    Each
    9.554510:115 to 1107498A55000000

    High-Strength Anchors for Concrete

    Image of ProductInUse. Front orientation. Anchors. High-Strength Anchors for Concrete.
    Image of Product. Front orientation. Contains Annotated. Anchors. High-Strength Anchors for Concrete.
    Offering the highest pull-out strengths, adhesive grips the anchors' lobes and knurls to keep anchors from shaking loose. These anchors are often used to secure heavy machinery with jarring starts and stops, such as compressors and compactors.
    To install, fill a clean, drilled hole half full of epoxy adhesive (sold separately). Thread a screw or threaded rod into the anchor and then slightly twist the anchor into the hole until it's flush with the surface. Then, hammer the head of the screw or rod a few times for a snug fit. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these anchors won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Ultimate
    Strength
    Size
    Dp.
    Type
    Lg.
    Drill Bit
    Size
    Min. Installation
    Dp.
    Pull-Out,
    lbf
    Shear
    Conditions
    Tested In
    Each
    Zinc-Plated Steel
    1/4"-20
    		1/2"UNC
    		1 5/8"5/16"
    		1 3/4"2,880Not Rated3,000 psi Concrete93980A11000000
    5/16"-18
    		3/4"UNC
    		2 3/8"7/16"
    		2 3/4"7,200Not Rated3,000 psi Concrete93980A1300000
    3/8"-16
    		1"UNC
    		2 3/4"1/2"
    		3 1/4"9,200Not Rated3,000 psi Concrete93980A15000000
    1/2"-13
    		1"UNC
    		3 3/4"5/8"
    		4 1/8"12,800Not Rated3,000 psi Concrete93980A17000000
    5/8"-11
    		1 1/2"UNC
    		5 3/4"7/8"
    		6 1/4"26,000Not Rated3,000 psi Concrete93980A19000000
    3/4"-10
    		1 1/2"UNC
    		6 1/2"1"
    		7 1/2"36,000Not Rated3,000 psi Concrete93980A21000000
    1"-8
    		2"UNC
    		8 1/2"1 1/2"
    		9 1/2"50,800Not Rated3,000 psi Concrete93980A230000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"-20
    		1/2"UNC
    		1 5/8"5/16"
    		1 3/4"2,880Not Rated3,000 psi Concrete93980A53000000
    5/16"-18
    		3/4"UNC
    		2 3/8"7/16"
    		2 3/4"7,200Not Rated3,000 psi Concrete93980A55000000
    3/8"-16
    		1"UNC
    		2 3/4"1/2"
    		3 1/4"9,200Not Rated3,000 psi Concrete93980A57000000
    1/2"-13
    		1"UNC
    		3 3/4"5/8"
    		4 1/8"12,800Not Rated3,000 psi Concrete93980A59000000
    5/8"-11
    		1 1/2"UNC
    		5 3/4"7/8"
    		6 1/4"26,000Not Rated3,000 psi Concrete93980A630000000
    3/4"-10
    		1 1/2"UNC
    		6 1/2"1"
    		7 1/2"36,000Not Rated3,000 psi Concrete93980A650000000
    1"-8
    		2"UNC
    		8 1/2"1 1/2"
    		9 1/2"50,800Not Rated3,000 psi Concrete93980A670000000
     
    Anchoring Adhesives
    Container
    Size, fl. oz.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Mix
    Ratio
    Temp. Range,
    ° F
    Each
    8.530241:140 to 1007505A4000000
    back to top