Dynamic Push Load Capacity Dynamic Push Load Capacity |
---|
|
|
Maximum Speed Maximum Speed |
---|
|
|
Retracted Length Retracted Length |
---|

|
|
|
Dynamic Pull Load Capacity Dynamic Pull Load Capacity |
---|
|
|
Stroke Protection Type Stroke Protection Type |
---|
|
Rod End Location Rod End Location |
---|
|
Extension Rod Type Extension Rod Type |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Plug-In Electric Actuators with Manual Controls
Without any hardwiring, these actuators give you control over your push-pull motion using either a hand or foot switch. Plug the actuator and the hand or foot switch into the control box (all sold separately). If power fails, actuators hold their loads in position. The brake prevents loads from shifting even slightly, making these actuators useful in vertical and high-vibration applications. Both actuator ends must be secured to fixed surfaces for the rod to extend and retract rather than rotate. Twist the extension rod until the clevis holes line up with your mounting holes. Fasten with clevis pins.
Control boxes supply power to actuators and switches. They have their own overload protection switch, which prevents damage to the actuator from overheating. If triggered, manually reset the switch after the actuator has cooled.
Switches have separate buttons to extend and retract each actuator they control. Some switches can be used to operate as many as three separate actuators.
IP04 rated actuators stand up to splashing water. IP66 rated actuators seal out dust and water from washdowns.
Maximum speed is how fast the actuator will move under no-load conditions. If you increase the load, the actuator speed will decrease. Use a speed-load chart to confirm which actuator will work for your application. Click on a part number and select “Product Detail” to view the chart for an actuator.
For technical drawings and 3-D models, click on a part number.


Actuators | Control Boxes | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Voltage | Full Load Current | Max. Speed, in./sec. | Extension Rod Type | Cord Lg., ft. | Retracted Lg. | Features | Each | Each | ||
For Damp Environments—IP04 | |||||||||||
449 lbs. Dynamic Pull Load/449 lbs. Dynamic Push Load | |||||||||||
2" | 24V DC | 4A | 0.52 | Rotating | 1 1/2 | 9 1/2" | Brake | 0000000 | 0000000 | 0000000 | 0000000 |
4" | 24V DC | 4A | 0.52 | Rotating | 1 1/2 | 11 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
6" | 24V DC | 4A | 0.52 | Rotating | 1 1/2 | 13 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
8" | 24V DC | 4A | 0.52 | Rotating | 1 1/2 | 15 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
10" | 24V DC | 4A | 0.52 | Rotating | 1 1/2 | 17 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
12" | 24V DC | 4A | 0.52 | Rotating | 1 1/2 | 19 1/4" | Brake | 0000000 | 000000 | 0000000 | 000000 |
899 lbs. Dynamic Pull Load/1,348 lbs. Dynamic Push Load | |||||||||||
2" | 24V DC | 6A | 0.28 | Rotating | 1 1/2 | 9 1/2" | Brake | 0000000 | 000000 | 0000000 | 000000 |
4" | 24V DC | 6A | 0.28 | Rotating | 1 1/2 | 11 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
6" | 24V DC | 6A | 0.28 | Rotating | 1 1/2 | 13 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
8" | 24V DC | 6A | 0.28 | Rotating | 1 1/2 | 15 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
10" | 24V DC | 6A | 0.28 | Rotating | 1 1/2 | 17 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
12" | 24V DC | 6A | 0.28 | Rotating | 1 1/2 | 19 1/4" | Brake | 0000000 | 000000 | 0000000 | 000000 |
For Damp, Dusty, and Washdown Environments—IP66 | |||||||||||
337 lbs. Dynamic Pull Load/337 lbs. Dynamic Push Load | |||||||||||
3" | 24V DC | 5A | 0.7 | Rotating | 2 1/2 | 12" | Brake | 0000000 | 000000 | 0000000 | 000000 |
6" | 24V DC | 5A | 0.7 | Rotating | 2 1/2 | 14 3/4" | Brake | 0000000 | 000000 | 0000000 | 000000 |
12" | 24V DC | 5A | 0.7 | Rotating | 2 1/2 | 20 5/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
18" | 24V DC | 5A | 0.7 | Rotating | 2 1/2 | 29 1/2" | Brake | 0000000 | 000000 | 0000000 | 000000 |
674 lbs. Dynamic Pull Load/674 lbs. Dynamic Push Load | |||||||||||
3" | 24V DC | 5.2A | 0.7 | Rotating | 2 1/2 | 12 3/4" | Brake | 0000000 | 000000 | 0000000 | 000000 |
6" | 24V DC | 5.2A | 0.7 | Rotating | 2 1/2 | 15 1/2" | Brake | 0000000 | 000000 | 0000000 | 000000 |
12" | 24V DC | 5.2A | 0.7 | Rotating | 2 1/2 | 21 1/2" | Brake | 0000000 | 000000 | 0000000 | 000000 |
18" | 24V DC | 5.2A | 0.7 | Rotating | 2 1/2 | 30 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |
1,348 lbs. Dynamic Pull Load/1,798 lbs. Dynamic Push Load | |||||||||||
3" | 24V DC | 5A | 0.28 | Rotating | 2 1/2 | 12 3/4" | Brake | 0000000 | 000000 | 0000000 | 000000 |
6" | 24V DC | 5A | 0.28 | Rotating | 2 1/2 | 15 1/2" | Brake | 0000000 | 000000 | 0000000 | 000000 |
12" | 24V DC | 5A | 0.28 | Rotating | 2 1/2 | 21 1/2" | Brake | 0000000 | 000000 | 0000000 | 000000 |
18" | 24V DC | 5A | 0.28 | Rotating | 2 1/2 | 30 3/8" | Brake | 0000000 | 000000 | 0000000 | 000000 |


For No. of Actuators | Cord Lg., ft. | Voltage | Current | Lg. | Wd. | Dp. | Environmental Rating | Button Type | Features | Each | |
Hand | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1 | 8 | 12V DC | 50mA | 6" | 2 1/4" | 1 1/8" | IP67 | Extend, Retract | Belt Clip | 0000000 | 0000000 |
2 | 8 | 12V DC | 50mA | 6" | 2 1/4" | 1 1/8" | IP67 | Extend, Retract | Belt Clip | 0000000 | 000000 |
3 | 8 | 12V DC | 50mA | 6" | 2 1/4" | 1 1/8" | IP67 | Extend, Retract | Belt Clip | 0000000 | 000000 |
Foot | |||||||||||
1 | 4 | 12V DC | 50mA | 1 1/2" | 9" | 4 1/8" | IP05 | Extend, Retract | __ | 0000000 | 000000 |

Material | Pkg. Qty. | Pkg. | |
Rubber | 2 | 0000000 | 00000 |
Precision Actuators for Stepper Motors


Accurately position a load by combining these actuators with a stepper motor, driver, and controller (all not included). Instead of just fully extending and retracting, these actuators precisely move loads to any point along the length of the stroke. And with a repeatability of ±0.01 mm, they'll move to the same spot on the stroke length every time. They’re often used in automated assemblies and other processes that require fine motion control. All are rated IP65 to withstand light rinses.
The extension rod is nonrotating, so it won’t twist as it extends and retracts. Thread accessories, such as clevis ends and ball joints, onto the rod end to attach your load.
Actuators for NEMA 23 motors mount from the motor body end to your mounting bracket with a clevis pin.
Actuators for NEMA 34 motors mount to a flat surface with the included base.
For technical drawings and 3-D models, click on a part number.
Dynamic Load Capacity, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg., mm | Pull | Push | Max. Speed, mm/s | Repeatability, mm | For Shaft Dia. | For Max. Motor Speed, rpm | For Max. Motor Torque, in.-oz. | Extension Rod Type | Environmental Rating | Retracted Lg. | Each | |
For NEMA 23 Motor Frame Size | ||||||||||||
100 | 719 | 719 | 1,000 | ±0.01 | 3/8" | 6,000 | 722 | Nonrotating | IP65 | 10 7/8" | 0000000 | 000000000 |
300 | 719 | 719 | 1,000 | ±0.01 | 3/8" | 6,000 | 722 | Nonrotating | IP65 | 18 3/4" | 0000000 | 00000000 |
500 | 719 | 719 | 1,000 | ±0.01 | 3/8" | 6,000 | 722 | Nonrotating | IP65 | 26 5/8" | 0000000 | 00000000 |
For NEMA 34 Motor Frame Size | ||||||||||||
100 | 719 | 719 | 1,000 | ±0.01 | 1/2" | 6,000 | 722 | Nonrotating | IP65 | 11 1/2" | 0000000 | 00000000 |
300 | 719 | 719 | 1,000 | ±0.01 | 1/2" | 6,000 | 722 | Nonrotating | IP65 | 19 3/8" | 0000000 | 00000000 |
500 | 719 | 719 | 1,000 | ±0.01 | 1/2" | 6,000 | 722 | Nonrotating | IP65 | 27 1/4" | 0000000 | 00000000 |