We will reply to your message within an hour.
More
Create linear motion with the most popular of our air cylinders.
These cylinders thread directly into your equipment, taking minimal space.
Also known as pancake cylinders, these deliver as much force as other cylinders, but with a shorter stroke to function in small spaces.
The magnetic piston inside these cylinders can activate relays and controllers when used with a sensor.
Designed to keep the piston from slamming against the cylinder body, these cylinders have adjustable air cushions at each end to minimize wear and noise.
Built to withstand hard knocks, these cylinders have a thick barrel wall for more durability than standard air cylinders.
Unlike other air cylinders that push and pull one object, these double-ended cylinders push one object while pulling another.
Able to resist corrosive solutions and chemical environments, these cylinders withstand washdown conditions.
Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.
Get the power and stroke of other tie rod cylinders in less than half the space.
Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.
Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns.
Cylinders have two parallel piston rods that prevent twisting as they extend and retract.
These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.
An extruded-aluminum body means these cylinders have no open spaces for debris to collect.
Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a large mounting area.
With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.
Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.
Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.
Control the movement of loads on your conveyor—the rod on these air cylinders extends to stop loads and retracts to let them pass.
Use rotary motion to drive devices in tight spaces.
Turn the adjustment bolt on these actuators to set the rotation between 0° and 190° to meet your application requirements.
Designed to turn heavy loads, these rotary air actuators have rack-and-pinion gears that provide high torque output.
Attach these actuators to manual ball valves, butterfly valves, and plug valves with an ISO 5211 hole pattern to automatically start and stop flow with compressed air.
For easy interchangeability, the mounting footprints of these cylinders meet NFPA and JIC industry standards.
With a small body size, these cylinders fit into tight spaces but offer similar push forces to standard hydraulic cylinders.
These cylinders have a magnetic piston that can be used with tie rod-mount proximity switches to electronically indicate piston position. For easy interchangeability, their mounting footprint meets NFPA or NFPA and JIC industry standards.