The magnetic piston inside these cylinders can activate relays and controllers when used with a sensor.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect.

Control the movement of loads on your conveyor—the rod on these air cylinders extends to stop loads and retracts to let them pass.

Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.

These metric lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects. They're commonly found in hand-powered clamps, vises, grates, doors, and work tables.

Install these nuts on a rotary shaft to create a linear positioning system without a lead screw. Instead of threads, a set of angled ball bearings drives the nut along a shaft as it spins.

Install these threaded collars on a metric lead screw to separate and position components, or use them as an end stop to limit travel.

Connect these fittings to a vacuum cup and compressed air source to create a vacuum generating system.

Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.

Use these cups with a vacuum system to grip, lift, and move flat materials, such as sheet metal and plastic.

Attach these cups to threaded connections on your vacuum system to gently lift bags, plastic film, and other sanitary wrappings.

Also known as spring plungers, these fittings are spring-loaded to accommodate items with variable heights.

Drain static charges from electronics and other sensitive, textured items as you lift and move them with your vacuum system.