System of Measurement System of Measurement |
|---|
|
For Tube OD For Tube OD | Show |
|---|
|
For Tube OD For Tube OD | Hide |
|---|
Material Material |
|---|
|
Thread Type Thread Type |
|---|
Connection Style Connection Style |
|---|
 |
| Threaded |
 |
| Barbed |
 |
| Flared |
 |
| Socket Connect |
 |
| Butt Weld |
 |
| Quick Clamp |
 |
| Clamp On |
Dash Size Dash Size |
|---|
|
For Tube Material For Tube Material |
|---|
|
Clamp Type Clamp Type |
|---|
 |  |
| Wing Nut | Bolt |
 |  |
| Spring | Recessed Nut |
For Use With For Use With |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Quick-Clamp Connection Type Quick-Clamp Connection Type |
|---|
 |
| Standard |
Nut Material Nut Material |
|---|
|
Flared Connection Type Flared Connection Type |
|---|
 | Standard |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Nuts, Materials, and Finishes
More
Drain, Waste, and Vent ABS Pipe Fittings for Chemicals
- For Use With: Sodium Hydroxide
- Max. Temperature: 180° F
- Specifications Met: ASTM D2661, ASTM D3311, ASTM D3965, ASTM F1498
- Pipe Nipples and Pipe: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
These Schedule 40 fittings are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Fittings meet ASTM D2661, ASTM D3311, ASTM D3965, and ASTM F1498 specifications and testing requirements for material quality and product dimensions.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
Aboveground Standard-Wall PVC Pipe Fittings for Drain, Waste, and Vent
- For Use With: Water
- Max. Temperature: 140° F
- Specifications Met: ASTM D1784, ASTM D2665
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Schedule 40 PVC Plastic
These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications. Fittings are PVC, which has good corrosion resistance. They meet ASTM D1784 and ASTM D2665 specifications and testing requirements for material quality.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Fittings with a compression end are also known as slip-joint fittings. Insert the tube into the compression end and turn the nut until hand tight. Since you don't have to wait for cement to dry, they are quicker to install than socket-connect fittings.
37° Flared Fittings for Stainless Steel Tubing
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They are 316 stainless steel for excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.
- For Use With: See table
- Temperature Range: See table
| For Tube OD | Pipe Size | For Use With | Material | Max. Pressure | Temp. Range, ° F | Each | |
NPT Threads | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/4" | 1 1/4 | Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water | 316 Stainless Steel | 3,000 psi @ 72° F | -420 to 1200° | 000000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
| For Tube OD | Nut Material | Each | |
| 1 1/4" | 316 Stainless Steel | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
For Tube OD | |||
|---|---|---|---|
| Inch | Sleeve Material | Each | |
Inch | |||
| 1 1/4" | 316 Stainless Steel | 000000000 | 000000 |
Sleeves for 37° Flared Fittings for Stainless Steel Tubing
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
- Tubing: Use with seamless or welded 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
For technical drawings and 3-D models, click on a part number.
For Tube OD | |||
|---|---|---|---|
| Inch | Sleeve Material | Each | |
Inch | |||
| 1 1/4" | 316 Stainless Steel | 000000000 | 000000 |
Precision AN 37° Flared Fittings for Stainless Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
304 stainless steel fittings have very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
304 Stainless Steel | |||||
|---|---|---|---|---|---|
| For Tube OD | Pipe Size | Max. Pressure | Specifications Met | Each | |
ANPT Threads | |||||
| 1 1/4" | 1 1/4 | 1,500 psi @ 72° F | AN816-20J, ASTM A380, SAE AS4841 | 00000000 | 000000 |
304 Stainless Steel | ||||
|---|---|---|---|---|
| For Tube OD | Max. Pressure | Specifications Met | Each | |
| 1 1/4" | 1,500 psi @ 72° F | AN818-20J, ASTM A380, SAE AS4841 | 00000000 | 000000 |
304 Stainless Steel | ||||
|---|---|---|---|---|
| For Tube OD | Max. Pressure | Specifications Met | Each | |
| 1 1/4" | 1,500 psi @ 72° F | AN819-20J, ASTM A380, MS20819, SAE AS4841 | 00000000 | 000000 |
High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets
The smooth finish inside these fittings makes it easy to remove product residue. Also known as aseptic and tri-clamp fittings, they connect with a gasket, a clamp, and another quick-clamp fitting for a fast and easy way to access your line. The pressure rating of the fitting will vary depending on the clamp you choose, and the temperature rating will vary based on the gasket material you choose.
316 stainless steel fittings have excellent corrosion resistance.
Note: To complete a connection, you’ll need two quick-clamp fittings, a clamp, and a gasket (all sold separately).
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water
- Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270
316 Stainless Steel | ||||
|---|---|---|---|---|
| For Tube OD | Flange OD | Pipe Size | Each | |
BSPP Threads | ||||
| 1 1/4" | 1.984" | 1 1/4 | 0000000 | 0000000 |
- For Use With: Air, Water
- Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270
316 Stainless Steel | ||||
|---|---|---|---|---|
| For Tube OD | Flange OD | Pipe Size | Each | |
BSPP Threads | ||||
| 1 1/4" | 1.984" | 1 1/4 | 0000000 | 0000000 |
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
Clamps with wing nut tighten by hand. Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold.
| For Tube OD | For Flange OD | Bolt Material | Max. Pressure | For Tube Specifications Met | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||||
|---|---|---|---|---|---|---|---|
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | 304 Stainless Steel | 1,500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 700 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 720 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Double Bolt | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | 316 Stainless Steel | 2,400 psi @ 72 ° F | __ | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 720 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
White Nylon Plastic with Wing Nut | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 150 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
Clamps for High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets or O-Rings
- Tubing:
Inch 304 Stainless Steel and Nylon Plastic: Use with welded 304/304L and 316/316L stainless steel that meets ASTM A269 or ASTM A270
Metric 304 Stainless Steel: Use with welded 304/304L and 316/316L stainless steel
Inch 316 Stainless Steel: Use with welded 304/304 L and 316/316L stainless steel
Metric 316 Stainless Steel: Use with welded 316/316L Stainless Steel
Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line. Clamps with wing nut tighten by hand. Clamps with safety wing nut won’t release from minor loosening or jostling. They have a leak-before-burst design, which means they’ll leak to relieve pressure if the seal fails instead of bursting and causing a safety hazard.
Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold. Double-bolt clamps meet ASME design standards for pressure vessels.
Clamps with recessed nut require a hex socket adapter to loosen the nut, preventing the clamp from tampering and accidental removal. They have a hole for lockout (padlock not included) to block unauthorized access, helping you meet Hazard Analysis and Critical Control Point (HACCP) programs and Good Management Practices (GMP). Both of these security measures reduce the risk of product contamination. These clamps have a leak-before-burst design, so rather than burst dangerously if the seal fails, they’ll safely relieve pressure by dripping instead.
304 stainless steel clamps have very good corrosion resistance.
316 stainless steel clamps are more corrosion resistant than 304 stainless steel clamps. Clamps with two-pin hinge apply more even pressure on gaskets than other clamps, causing less wear and tear on gaskets.
Nylon clamps are lightweight compared to stainless steel clamps.
For technical drawings and 3-D models, click on a part number.
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
| For Tube OD | For Flange OD | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||
|---|---|---|---|---|---|
| 1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 00000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 1,500 psi @ 72° F | __ | 00000000 | 00000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 700 psi @ 72° F | __ | 0000000 | 00000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
316 Stainless Steel with Double Bolt | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 2,400 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
White Nylon Plastic with Wing Nut | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 150 psi @ 72° F | __ | 00000000 | 00000 |
The temperature rating of the fitting will vary depending on the gasket or O-ring material you choose. Buna-N is oil resistant. EPDM resists water and steam and works well in humid environments. Silicone withstands high temperatures. Fluoroelastomer stands up to fuel, oil, and acid condensates. PTFE withstands harsh chemicals, with the exception of molten alkali metal and elemental fluorine.
| For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|
Buna-N Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
EPDM Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Silicone Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Fluoroelastomer Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
PTFE Plastic | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
Butt-Weld Fittings for Stainless Steel Tubing
- For Use With: See table
- Max. Temperature: 250° F, except hose fittings are unrated.
- Tubing:
304 Stainless Steel: Use with 304/304L stainless steel that meets ASTM A213, ASTM A269, or ASTM A270, except DIN EN 10357 fittings with only ASTM A269 or ASTM A270
316 Stainless Steel: Use with 316/316L stainless steel that meets ASTM A213, ASTM A269, or ASTM A270, except ASME BPE and DIN EN 10357 fittings with only ASTM A269 or ASTM A270 - Specifications Met: See table
Weld these fittings to tubing for a permanent, flush connection that permits smooth flow through a line.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Fittings with barbed hose end connect to hose with a hose clamp (sold separately).
316/316L Stainless Steel | |||||
|---|---|---|---|---|---|
| For Tube OD | For Hose ID | Wall Thick. | For Use With | Each | |
Dull | |||||
| 1 1/4" | 1 1/4" | 0.065" | Air, Food, Water | 000000000 | 000000 |
304/304L Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Tube OD | Max. Pressure | Max. Vacuum | Lg. | Wall Thick. | For Use With | Specifications Met | Each | |
Polished | ||||||||
| 1 1/4" | 600 psi @ 72° F | 10 -6 torr @ 72° F | 2 3/4" | 0.065" | Dairy, Food | 3-A Certified 63-04 | 000000000 | 000000 |
304/304L Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Tube OD | Max. Pressure | Max. Vacuum | Lg. (A) | Wall Thick. | For Use With | Specifications Met | Each | |
Polished | ||||||||
| 1 1/4" | 600 psi @ 72° F | 10 -6 torr @ 72° F | 1 21/32" | 0.065" | Dairy, Food | 3-A Certified 63-04 | 000000000 | 000000 |
37° Flared Fittings for Steel Tubing
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: See Table
- Temperature Range: See Table
| For Tube OD | Pipe Size | For Use With | Material | Max. Pressure | Temp. Range, °F | Each | |
NPTF Threads | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/4" | 1 1/4 | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | 2,000 psi @ 72° F | -60° to 400° | 00000000 | 000000 |
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temperature Range: -60° to 400° F
| For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPTF Threads | |||||
|---|---|---|---|---|---|
| 1 1/4" | 1 1/4 | Zinc-Plated Steel | 2,000 psi @ 72° F | 00000000 | 000000 |
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temperature Range: -60° to 400° F
| For Tube OD | Nut Material | Max. Pressure | Each | |
| 1 1/4" | Zinc-Plated Steel | 2,000 psi @ 72° F | 00000000 | 000000 |
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temperature Range: -60° to 400° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
For Tube OD | ||||
|---|---|---|---|---|
| Inch | Sleeve Material | Max. Pressure | Each | |
Inch Sleeves | ||||
| 1 1/4" | Zinc-Plated Steel | 2,000 psi @ 72° F | 00000000 | 00000 |
Sleeves for 37° Flared Fittings for Steel Tubing
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temp. Range: -60° to 400° F
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
For technical drawings and 3-D models, click on a part number.
For Tube OD | ||||
|---|---|---|---|---|
| Inch | Sleeve Material | Max. Pressure | Each | |
Inch Sleeves | ||||
| 1 1/4" | Zinc-Plated Steel | 2,000 psi @ 72° F | 00000000 | 00000 |
Socket-Connect Fittings for Plastic Tubing—Air and Water
- Temperature Range: 0° to 140° F
- Tubing: Use with PVC plastic
Made of soft PVC, these fittings flex to withstand high-vibration applications. Use them in place of rigid fittings to create a more flexible system. To connect, slide fittings onto tubing and secure with a clamp.
For technical drawings and 3-D models, click on a part number.
Tube-End Weld Nuts
Weld these nuts to round uncoated metal tubes to attach threaded parts, such as rod ends. Also known as tube adapters and weldable threaded tube ends.
For technical drawings and 3-D models, click on a part number.
| For Tube Wall Thick. | Thread Size | Ht. | Threading | Thread Lg. | Each | |
4130 Alloy Steel | ||||||
|---|---|---|---|---|---|---|
For 1 1/4" Tube OD | ||||||
| 0.095" | 5/8"-18 | 1 1/2" | Fully Threaded | 1 1/2" | 000000000 | 000000 |
| 0.095" | 3/4"-16 | 1 1/2" | Fully Threaded | 1 1/2" | 000000000 | 00000 |
| 0.12" | 5/8"-18 | 1 7/8" | Partially Threaded | 1 9/16" | 000000000 | 00000 |
| 0.12" | 3/4"-16 | 1 7/8" | Fully Threaded | 1 7/8" | 000000000 | 00000 |
Left-Hand Threaded Tube-End Weld Nuts
Use these tube-end nuts with left-hand threaded fasteners. You can weld them to round uncoated metal tubes to attach threaded parts, such as rod ends. Also known as tube adapters and weldable threaded tube ends.
For technical drawings and 3-D models, click on a part number.
| For Tube Wall Thick. | Thread Size | Ht. | Threading | Thread Lg. | Each | |
4130 Alloy Steel | ||||||
|---|---|---|---|---|---|---|
For 1 1/4" Tube OD | ||||||
| 0.095" | 5/8"-18 | 1 1/2" | Fully Threaded | 1 1/2" | 000000000 | 000000 |
| 0.095" | 3/4"-16 | 1 1/2" | Fully Threaded | 1 1/2" | 000000000 | 00000 |
| 0.12" | 5/8"-18 | 1 7/8" | Partially Threaded | 1 9/16" | 000000000 | 00000 |
| 0.12" | 3/4"-16 | 1 7/8" | Fully Threaded | 1 7/8" | 000000000 | 00000 |
Sink Drain Compression Tube Adapters
Slip-Joint Fittings
Use these fittings to connect tailpieces, P-traps, S-traps, and extension tubing to sink drains.