How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
45° Flared Fittings for Copper and Brass Tubing
- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper that meets ASTM B280
No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They require a nut (sold separately) for each tube end. Fittings are also known as refrigeration and SAE fittings. They are brass for good corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except adapters for 1/8" and 1" tube OD are not for use with fuel oil
- Specifications Met: See table
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except adapters for 5/8" and 3/4" tube OD are not for use with fuel oil
- Specifications Met: See table
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size  | Material | Max. Pressure | Specifications Met | Each | |
NPTF Threads | |||||||
| 3/4" | 0.035" | 3/4 | Brass | 550 psi @ 73° F | SAE J512, SAE J513 | 000000000 | 000000 |
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water
- Specifications Met: SAE J512, SAE J513
For Tube | Socket Connection | ||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Copper Tube Size | For Tube OD | Material | Max. Pressure | Each | |
| 3/4" | 0.035" | 5/8 | 3/4" | Brass | 550 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water
- Specifications Met: SAE J512, SAE J513, UL Listed
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | Each | |
| 3/4" | 0.035" | Brass | 550 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water
- Specifications Met: SAE J512, SAE J513, UL Listed
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | Each | |
| 3/4" | 0.035" | Brass | 550 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water
- Specifications Met: SAE J512, SAE J513, UL Listed
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | Each | |
| 3/4" | 0.035" | Brass | 550 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except nuts for 1" tube OD are not for use with fuel oil
- Specifications Met: SAE J512, SAE J513, UL Listed; except nuts for 1" tube OD meet SAE J512 and SAE J513 only
Metal Push-On Barbed Hose Fittings for Air and Water
Fittings have sharper barbs than standard barbed hose fittings to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. They have good corrosion resistance.
Fittings with a flared end meet JIC or SAE standards for dimensions. Fittings with a 45° flared end are also known as refrigeration and SAE fittings.The optional installation tool (sold separately) allows you to connect large quantities of barbed fittings to push-on hose. Use the built-in cutter to squarely cut the hose without fraying. Next, lubricate either the push-on hose, fitting or both. Then, clamp the hose into the tool’s vise and apply light pressure on the handle to drive into the fitting.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Hose ID Range | Lg. | Ht. | Dp. | Dia. | No. of | Mounting Fasteners Included | Each | |
| 1/4" to 3/4" | 13 1/2" | 7" | 2 3/8" | 7/16" | 4 | No | 00000000 | 0000000 |