These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Typically used with low-pressure stainless steel threaded pipe fittings.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Also known as Pressure Class 150 flanges, these brass flanges are designed for low-pressure applications.

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

Extreme pressures are no problem for these heavy-duty brass fittings.

Use these fittings for low-pressure applications in noncorrosive environments.

These flanges are for low-pressure applications in noncorrosive environments.

Made of galvanized steel, this Schedule 40 pipe has fair corrosion resistance and is designed for low-pressure applications.

Typically used with medium-pressure iron and steel threaded pipe fittings. Also known as Schedule 80.

Typically used with low-pressure aluminum threaded pipe fittings.

Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation.

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Also known as JIS (Japanese Industrial Standard) fittings.

Thicker walls make these fittings—sometimes called flareless or bite fittings—withstand about twice as much pressure as standard compression fittings, so they’re good for hydraulic power applications.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

Made of EPDM, the gasket on these fittings stands up to the hot water found in heat exchangers and cooling systems. These fittings have stainless steel pipe threads, which are more durable than the plastic pipe threads found on other push-to-connect tube fittings.

Fittings have good corrosion resistance.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

Made of acetal, these compression fittings are lighter in weight than metal compression fittings and won’t absorb moisture when used in wet environments.

Couplings can handle pressures up to 250 psi.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight.

Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Use these fittings with power washer guns and in other high-pressure water supply applications.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.

Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.

Use these couplings at pressures up to 10,000 psi. The plug and socket thread together to form a stronger connection than other quick-disconnect couplings. They are compatible with High-Pressure Thread-Lock-shape plugs and sockets.

Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Join two female-threaded parts of various thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.