Power Source Power Source | Show |
|---|
|
Power Source Power Source | Hide |
|---|
|
|
Maximum Flow Rate Maximum Flow Rate |
|---|
|
|
|
For Use With For Use With |
|---|
Pump Type Pump Type |
|---|
|
Housing Material Housing Material |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Pump Style Pump Style |
|---|
|
Priming Type Priming Type |
|---|
|
Intake Connection Type Intake Connection Type |
|---|
|
System of Measurement System of Measurement |
|---|
|
Discharge Gender Discharge Gender |
|---|
|
Maximum Feet of Head Maximum Feet of Head |
|---|
|
Overall Length Overall Length |
|---|
|
|
|
Overall Width Overall Width |
|---|
|
|
|
Intake Pipe Connection Type Intake Pipe Connection Type |
|---|
|
Intake Gender Intake Gender |
|---|
|
How to Prime Your Pump
More
How to Determine Feet of Head
More
About Process Pumps
More
Constant-Flow-Rate Pumps without Motor for Water
These pumps have a bronze housing and gears for use with water. Select your own motor to tailor them to your application. Use a NEMA 56C frame electric motor with a coupling and belt/pulley drive. Also known as gear pumps, they produce a smooth flow of liquid for water delivery. All are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Do not use with solids.
Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
For technical drawings and 3-D models, click on a part number.
Required hp | Intake | Discharge | Overall | Shaft | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Max. Flow Rate @ 25 psi, gpm | Max. Ft. of Head, ft. | Max. Viscosity, cP | @ 25 psi | @ 100 psi | Pipe Size  | Thread Type | Gender | Pipe Size | Thread Type | Gender | Lg. | Wd. | Ht. | Dia. | Lg. | Ctr.-to-Base Lg. | Each | |
For 1,725 rpm Max. Motor Speed | |||||||||||||||||||
| 2.1 | 1.8 | 345 | 17,300 | 1/8 | 1/4 | 1/4 | NPT | Female | 1/4 | NPT | Female | 6 3/16" | 2 1/2" | 3" | 1/2" | 1 13/16" | 1 7/8" | 000000 | 0000000 |
| 4.2 | 4 | 345 | 17,300 | 1/4 | 1/2 | 1/4 | NPT | Female | 1/4 | NPT | Female | 5 3/4" | 3" | 3 11/16" | 1/2" | 1 13/16" | 2 3/8" | 0000000 | 000000 |
| 10.6 | 10.2 | 345 | 17,300 | 3/4 | 1 3/4 | 1/2 | NPT | Female | 1/2 | NPT | Female | 6 7/8" | 3 3/4" | 4 1/4" | 5/8" | 2" | 2 3/4" | 0000000 | 000000 |
| 19.8 | 19 | 345 | 17,300 | 1 1/2 | 2 3/4 | 3/4 | NPT | Female | 3/4 | NPT | Female | 7 1/16" | 4 3/8" | 5 1/4" | 5/8" | 2 3/16" | 3 9/16" | 0000000 | 000000 |
| 23.5 | 22.2 | 345 | 17,300 | 1 1/2 | 2 3/4 | 1 | NPT | Female | 1 | NPT | Female | 7 5/16" | 4 5/16" | 5 1/4" | 5/8" | 2 3/16" | 3 9/16" | 0000000 | 000000 |
For 1,750 rpm Max. Motor Speed | |||||||||||||||||||
| 7.2 | 7 | 345 | 17,300 | 3/4 | 1 1/2 | 3/8 | NPT | Female | 3/8 | NPT | Female | 6 9/16" | 3 3/4" | 4 1/4" | 5/8" | 2 1/16" | 2 3/4" | 0000000 | 000000 |
High-Pressure Constant-Flow-Rate Pumps without Motor for Water
Commonly called rotary vane pumps, they have a built-in bypass relief valve to prevent pressure buildup. Attach an electric motor with a speed reducer or a belt pulley to alter the pump speed. Use a NEMA 56C frame motor. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids. They meet NSF/ANSI 61 safety standards for use with drinking water systems.
Pumps with a 303 stainless steel housing are more corrosion resistant than pumps with a brass housing.
Intake (NPT) | Discharge (NPT) | Overall | Shaft | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Max. ft. of Head | Max. Pressure, psi | Max. Viscosity | For Motor Power Source | Required hp | Pipe Size | Gender | Pipe Size | Gender | Lg. | Wd. | Ht. | Lg. | Wd. | Dp. | Center-to-Base Lg. | Each | |
Brass Housing | ||||||||||||||||||
| 0.8 | 554 | 240 | Not Rated | Electric | 1/4 | 3/8 | Female | 3/8 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 0000000 |
| 1.8 | 554 | 240 | Not Rated | Electric | 1/3 | 3/8 | Female | 3/8 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 000000 |
| 2.3 | 554 | 240 | Not Rated | Electric | 1/2 | 3/8 | Female | 3/8 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 000000 |
| 4.3 | 554 | 240 | Not Rated | Electric | 3/4 | 1/2 | Female | 1/2 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 000000 |
| 5.4 | 554 | 240 | Not Rated | Electric | 1 | 1/2 | Female | 1/2 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 000000 |
303 Stainless Steel Housing | ||||||||||||||||||
| 2.3 | 554 | 240 | Not Rated | Electric | 1/2 | 3/8 | Female | 3/8 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 000000 |
| 4.3 | 554 | 240 | Not Rated | Electric | 3/4 | 1/2 | Female | 1/2 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 000000 |
| 5.4 | 554 | 240 | Not Rated | Electric | 1 | 1/2 | Female | 1/2 | Female | 7" | 7" | 6" | 7/16" | 1/4" | 3/8" | 3" | 00000000 | 000000 |
Constant-Flow-Rate Pumps without Motor for Chemicals
With a 316 stainless steel housing and stainless steel gears, these pumps are often used to dispense chemicals such as ethylene glycol, isopropyl alcohol, and nitric acid. Use an electric motor with a coupling and belt/pulley drive. Also known as gear pumps, they produce a smooth flow of liquid. All are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Do not use with solids.
For technical drawings and 3-D models, click on a part number.
Required hp | Intake (NPT) | Discharge (NPT) | Overall | Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate @ 25 psi, gpm | Max. Flow Rate, gpm | Max. ft. of Head | Max. Pressure, psi | Max. Viscosity, cP | @ 25 psi | @ 100 psi | Pipe Size | Gender | Pipe Size | Gender | Lg. | Wd. | Ht. | Dia. | Lg. | Center-to-Base Lg. | Each | |
| 4.5 | 4.5 | 462 | 200 | 20,000 | 1/4 | 1/2 | 3/8 | Female | 3/8 | Female | 6 1/4" | 3" | 3 11/16" | 9/16" | 1 11/16" | 2 3/8" | 00000000 | 000000000 |
| 8.9 | 9 | 462 | 200 | 20,000 | 3/4 | 1 | 1/2 | Female | 1/2 | Female | 7 1/4" | 3 1/2" | 4 1/2" | 11/16" | 1 9/16" | 3" | 00000000 | 00000000 |
High-Pressure Constant-Flow-Rate Pumps without Motor for Pressure Washing
Also known as plunger pumps, these can provide pressures up to 3,000 psi. Use them for washdowns, drain jetting, and other pressurized water-spraying applications. Connect them directly to an electric motor to alter the pump speed. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.
For technical drawings and 3-D models, click on a part number.
Intake | Discharge | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Max. Pressure, psi | Temp. Range, °F | Required hp | For NEMA Frame | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Lg. | Wd. | Ht. | For Shaft Dia. | Each | |
| 2 | 2,000 | -20° to 160° | 2.7 | 56C | 3/8 | NPT | Female | 3/8 | NPT | Female | 8 1/4" | 8 5/8" | 6 1/2" | 5/8" | 00000000 | 0000000 |
| 3 | 3,000 | -20° to 140° | 6 1/5 | 182TC, 184TC | 1/2 | NPT | Female | 3/8 | NPT | Female | 9 1/2" | 9 1/4" | 7 1/8" | 1 1/8" | 00000000 | 000000 |
| 4 | 2,000 | -20° to 140° | 5 1/2 | 182TC, 184TC | 1/2 | NPT | Female | 3/8 | NPT | Female | 9 1/2" | 9 1/4" | 7 1/8" | 1 1/8" | 00000000 | 000000 |
Constant-Flow-Rate Pumps without Motor for Oil
A cast iron housing and steel gears allow these pumps to be used to dispense oil and fuel such as hydraulic oil and diesel fuel. Select your own motor to tailor them to your application. Use an air or electric motor with a coupling and belt/pulley drive. Also known as gear pumps, they produce a smooth flow of liquid for applications such as engine lubrication. All are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Do not use with solids.
Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
For technical drawings and 3-D models, click on a part number.
Required hp | Intake | Discharge | Overall | Shaft | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate @ 25 psi, gpm | Max. Flow Rate, gpm | Max. ft. of Head | Max. Viscosity, cP | @ 25 psi | @ 100 psi | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Lg. | Wd. | Ht. | Dia. | Lg. | Center-to-Base Lg. | Each | |
| 8.9 | 9 | 462 | 20,000 | 3/4 | 1 | 1/2 | NPT | Female | 1/2 | NPT | Female | 7 1/4" | 3 7/16" | 4 1/2" | 11/16" | 1 9/16" | 3" | 00000000 | 0000000 |
| 23 | 23.2 | 462 | 600 | 1.2 | 2.1 | 1 | NPT | Female | 3/4 | NPT | Female | 9 1/8" | 4 1/2" | 6" | 3/4" | 1 1/2" | 3 7/8" | 00000000 | 00000000 |
Circulation Pumps without Motor
Also known as centrifugal pumps, these send a high flow of liquid through a pipeline or a closed circuit. They’re often used in heating and cooling applications, as well as for tank filling and emptying. Connect them to a spark-free air motor for hazardous locations, or use an electric motor with a speed reducer or belt pulley to alter pump speed. Recommended for use with a NEMA 56C frame motor. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.
For technical drawings and 3-D models, click on a part number.
Intake | Discharge | Shaft | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Max. ft. of Head | Max. Pressure, psi | Max. Viscosity, cP | Temp. Range Max., °F | Required hp | Thread Type | Gender | Pipe Size | Thread Type | Gender | Pipe Size | Lg. | Dia. | Center-to-Base Lg. | Ht. | Wd. | Lg. | Each | |
For 1,750-4,000 rpm Motor Speed | |||||||||||||||||||
| 35 | 58 | 75 | 23 | 200° | 3/5 | NPT | Female | 3/4 | NPT | Female | 1/2 | 1 3/8" | 5/8" | 3 1/4" | 5 1/8" | 5 3/4" | 6 5/8" | 0000000 | 0000000 |
| 85 | 67 | 75 | 23 | 200° | 2 | NPT | Female | 1 1/4 | NPT | Female | 1 | 1 3/8" | 5/8" | 3 1/4" | 5 3/4" | 6 1/2" | 6 3/4" | 0000000 | 000000 |
Self-Priming Circulation Pumps without Motor for Oil
Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as flexible impeller pumps, they create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. The impeller resists clogging and wear. Select a spark-free air motor for hazardous environments or attach an electric motor with a speed reducer or a belt pulley to alter the pump speed.
Repair kits (sold separately) include components such as impellers, O-rings, and seal lips.
Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
For technical drawings and 3-D models, click on a part number.
Intake (NPT) | Discharge (NPT) | Shaft | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Max. Ft. of Head, ft. | Max. Pressure, psi | Max. Viscosity | Temp. Range, °F | Required hp | Gender | Pipe Size | Gender | Pipe Size | Dia. | Lg. | Ctr.-to-Base Lg. | Ht. | Lg. | Wd. | Each | |
For 500 rpm-2,100 rpm Motor Speed | |||||||||||||||||
| 11.5 | 50 | 21 | Not Rated | 50° to 180° | 1/3 hp | Female | 1/2 | Female | 1/2 | 5/8" | 1 1/8" | 1 15/16" | 3 13/16" | 4 1/2" | 4 1/8" | 0000000 | 0000000 |
| 25 | 50 | 26 | Not Rated | 50° to 180° | 3/4 hp | Female | 1 | Female | 1 | 5/8" | 2 1/4" | 1 7/8" | 3 9/16" | 6 3/8" | 4 3/4" | 0000000 | 000000 |
Self-Priming Circulation Pumps without Motor for Water
Also known as flexible impeller pumps, these create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. The impeller resists clogging and wear. Select a spark-free air motor for hazardous environments or attach an electric motor with a speed reducer or a belt pulley to alter the pump speed.
Repair kits (sold separately) include components such as impellers, O-rings, and seal lips.
Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
For technical drawings and 3-D models, click on a part number.
Intake (NPT) | Discharge (NPT) | Overall | Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Max. ft. of Head | Max. Pressure, psi | Max. Viscosity | Temp. Range, °F | Required hp | Gender | Pipe Size | Gender | Pipe Size | Ht. | Lg. | Wd. | Dia. | Lg. | Ctr.-to-Base Lg. | Each | |
For 500 rpm-2,100 rpm Motor Speed | |||||||||||||||||
| 13 | 60 | 26 | Not Rated | 50° to 180° | 1/3 | Female | 1/2 | Female | 1/2 | 3 13/16" | 4 1/2" | 4 1/8" | 5/8" | 1 1/8" | 1 15/16" | 0000000 | 0000000 |
| 27.9 | 60 | 26 | Not Rated | 50° to 180° | 3/4 | Female | 1 | Female | 1 | 3 9/16" | 6 3/8" | 4 3/4" | 5/8" | 2 1/4" | 1 7/8" | 0000000 | 000000 |