Container Type Container Type |
|---|
 |  |
| Brush-Top Bottle | Syringe |
 |  |
| Tube | Aerosol Can |
 |  |
| Cartridge | Bottle |
For Joining For Joining |
|---|
|
For Use On For Use On |
|---|
Consistency Consistency |
|---|
|
Clarity Clarity |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
About Structural Adhesives
More
Acrylic Adhesive Activators
Activators are required for no-mix acrylic structural adhesives to create adhesion.
No-Mix Acrylic Structural Adhesives
No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Dispense adhesives in cartridges with a standard caulk gun.
324 and 330 bond dissimilar materials.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Requires Loctite® Activator No. | Each | |
Loctite® Adhesives with Activator | |||||||||||||
| 330 | 0.85 | Syringe | 5 min. | 24 hrs. | 3,300 | Not Rated | Thick Liquid (67,500 cP) | -65° to 250° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass | __ | 0000000 | 000000 |
| 330 | 8.5 | Tube | 5 min. | 24 hrs. | 3,300 | Not Rated | Thick Liquid (67,500 cP) | -65° to 250° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass | __ | 0000000 | 000000 |
Loctite® Adhesives | |||||||||||||
| 330 | 10 | Cartridge | 5 min. | 24 hrs. | 3,300 | Not Rated | Thick Liquid (67,500 cP) | -65° to 250° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass | 7387 | 00000000 | 000000 |
| 330 | 33 | Bottle | 5 min. | 24 hrs. | 3,300 | Not Rated | Thick Liquid (67,500 cP) | -65° to 250° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass | 7387 | 00000000 | 000000 |
Adhesives for Conveyor Pulley Coating
Attach adhesive-mount coatings—also known as lagging—to conveyor pulleys without removing them from your system, which is how you apply traditional coatings. For optimal bonding strength, apply the primer and mix equal parts adhesive and activator. Apply two layers of the adhesive mixture.
To Order—You’ll need the same amount of adhesive and activator. One can of adhesive and one bottle of activator will cover up to 314" of surface area. To find your pulley’s surface area, multiply your pulley’s diameter by its width.
Container | ||||
|---|---|---|---|---|
| Type | Size, oz. | Type | Each | |
| Activator | 1.41 | Bottle | 0000000 | 000000 |