Only for use with 3M dual cartridges, these guns dispense two-part adhesives.

Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.

Use these plungers with a 3M dispensing gun for adhesives in dual cartridges.

Adapt a standard caulk gun to dispense two-part adhesives from 1.69-oz. cartridges.

Attach these nozzles to a cartridge for controlled dispensing.

Similar to a caulk gun, these guns are good for small jobs.

A quick disconnect bayonet connection attaches these holders to a gun to hold an adhesive cartridge in place.

Use these plungers with Loctite® single-component syringes.

Dispense up to 3 times as much adhesive per hour as our standard hot-melt glue guns.

These small guns get into areas larger guns can't.

Don't be tethered by a cord—take these guns where they're needed.

Use these guns in heat-sensitive applications and on delicate materials. They have a temperature setting of 250° F.

Choose from cone tips, L-tips, and T-tips.

With five temperature range options, these guns can dispense 3M adhesives with different melting points.

Palm triggers make long-term operation more comfortable.

Extract all the contents from tubes of adhesives and sealants.

For easy cleanup, these trowels are disposable. They have V- or square-shaped notches.

Keep cups and sticks on hand for mixing two-part adhesives.

Brushes have natural bristles and a wood handle.

Store adhesives, cements, and lacquers for up to two weeks without hardening.

Prepare PVC and CPVC pipe for bonding.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.

The nonstick surface is good for liquids that tend to clog, such as instant-bonding adhesives.

The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.

Often used to spread adhesives when attached to syringes and dispensers with a luer lock connection.

Attach a needle with a luer lock connection to dispense contents.

Designed for dispensing tiny quantities, these glass syringes are often used in gas chromatography applications. Attach a needle with a luer lock connection to dispense contents.

Use these syringes with an air-powered dispenser to make repetitive dispensing easier on your hands.

The ergonomic design helps reduce fatigue when dispensing one-part adhesives, sealants, and fluids.

Each pull of the trigger dispenses a set amount of liquid, making these guns useful for repeated dispensing applications.

Add a needle with a luer lock connection and squeeze to dispense a single drop or a stream of liquid.

Spread thick adhesives and epoxies to smooth surfaces, such as laminates and fiberglass, with these hard rollers.

These frames have a telescoping handle that extends from 18" to 34".

These frames adjust to hold 12", 14", and 18" wide roller covers, so you can take on different-sized jobs with the same frame. Use them to cover large, flat surfaces quickly.

Flatten air bubbles, smooth wrinkles, and squeeze out excess primer fluid when applying films and sheets to a surface.

Achieve the perfect bead every time.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Let compressed air do the work for you when dispensing sealants from cartridges.

These flexible extensions add length and bend 180° to get into hard-to-reach areas.

Immerse the nozzle in the sealant and pull back the rod to fill.

Dispense sealants packaged in sausage packs.