Adhesive Type Adhesive Type |
|---|
|
Maximum Pull Maximum Pull |
|---|
Sets of Poles Sets of Poles |
|---|
Material Material |
|---|
|
Pull Rating Pull Rating |
|---|
|
Flux Density Flux Density |
|---|
|
|
Maximum Energy Product Maximum Energy Product |
|---|
|
|
Adhesive Location Adhesive Location |
|---|
|
For Use On For Use On |
|---|
About Paint and Protective Coatings
More
About Magnets
More
Flexible Magnets
These flexible magnets are made of corrosion-resistant ceramic and bonded with rubber for flexibility. Use scissors to cut them into custom shapes and sizes.
Rubber adhesive adheres quickly and works especially well on plastics.
Acrylic adhesive is more water- and chemical-resistant than rubber adhesive.
3M VHB adhesive creates permanent bonds.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
| Wd. | Lg. | Max. Pull, lbs. | Max. Temperature, °F | Adhesive Type | Pkg. Qty. | Pkg. | |
Holding Power on One Face | |||||||
|---|---|---|---|---|---|---|---|
1/64" Thick. | |||||||
| 2" | 3 1/2" | 2 | 150° | Rubber | 10 | 000000 | 00000 |
0.02" Thick. | |||||||
| 2" | 4" | 3 | 150° | Rubber | 1 | 0000000 | 000 |
| 3" | 5" | 6 | 150° | Rubber | 1 | 0000000 | 000 |
| 5" | 8" | 17 | 150° | Rubber | 1 | 000000 | 0000 |
| 7" | 10" | 29 | 150° | Rubber | 1 | 000000 | 0000 |
1/32" Thick. | |||||||
| 12" | 12" | 85 | 150° | Rubber | 1 | 000000 | 0000 |
| 12" | 18" | 128 | 150° | Rubber | 1 | 0000000 | 0000 |
| 12" | 24" | 170 | 150° | Rubber | 1 | 0000000 | 0000 |
1/16" Thick. | |||||||
| 12" | 24" | 520 | 150° | Rubber | 1 | 000000 | 00000 |
3/16" Thick. | |||||||
| 1/2" | 1/2" | 0.4 | 150° | Acrylic | 8 | 00000000 | 0000 |
| 3/4" | 3/4" | 0.8 | 150° | Rubber | 6 | 00000000 | 0000 |
| 1" | 1" | 1.5 | 150° | Rubber | 4 | 00000000 | 0000 |
Holding Power on Two Faces | |||||||
1/32" Thick. | |||||||
| 12" | 24" | 160 | 150° | Acrylic | 1 | 0000000 | 00000 |
1/16" Thick. | |||||||
| 12" | 24" | 200 | 150° | Acrylic | 1 | 0000000 | 00000 |
| Wd. | Max. Pull | Max. Temperature, °F | Adhesive Type | Lengths, ft. | Per Ft. | |
Holding Power on One Face | ||||||
|---|---|---|---|---|---|---|
1/64" Thick. | ||||||
| 24 3/8" | 36 lbs./sq. ft. | 150° | Rubber | 0000000 | 00000 | |
| 24 3/8" | 80 lbs./sq. ft. | 150° | Rubber | 0000000 | 0000 | |
0.02" Thick. | ||||||
| 24 3/8" | 90 lbs./sq. ft. | 150° | Rubber | 0000000 | 0000 | |
0.025" Thick. | ||||||
| 24 3/8" | 100 lbs./sq. ft. | 150° | Rubber | 0000000 | 0000 | |
1/32" Thick. | ||||||
| 1/4" | 1.4 lbs./ft. | 150° | Acrylic | 0000000 | 000 | |
| 1/4" | 2 lbs./ft. | 150° | Acrylic | 0000000 | 000 | |
| 3/8" | 2 lbs./ft. | 150° | Acrylic | 0000000 | 000 | |
| 3/8" | 2.8 lbs./ft. | 150° | Acrylic | 0000000 | 000 | |
| 1/2" | 4 lbs./ft. | 140° | 3M VHB (Very High Bond) | 0000000 | 000 | |
| 1/2" | 4 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 3/4" | 8 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 1" | 8 lbs./ft. | 140° | 3M VHB (Very High Bond) | 0000000 | 0000 | |
| 1" | 8 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 1 1/2" | 16 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 2" | 16 lbs./ft. | 140° | 3M VHB (Very High Bond) | 0000000 | 0000 | |
| 2" | 16 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 3" | 24 lbs./ft. | 140° | 3M VHB (Very High Bond) | 0000000 | 0000 | |
| 3" | 24 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 4" | 26 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 4" | 35 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 24 3/8" | 130 lbs./sq. ft. | 150° | Rubber | 0000000 | 0000 | |
1/16" Thick. | ||||||
| 1/4" | 3.9 lbs./ft. | 150° | Acrylic | 0000000 | 000 | |
| 1/4" | 2.7 lbs./ft. | 150° | Acrylic | 0000000 | 000 | |
| 3/8" | 4 lbs./ft. | 150° | Acrylic | 0000000 | 000 | |
| 3/8" | 5 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 1/2" | 9 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 1/2" | 6 lbs./ft. | 140° | 3M VHB (Very High Bond) | 0000000 | 0000 | |
| 1/2" | 6 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 3/4" | 11 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 1" | 12 lbs./ft. | 140° | 3M VHB (Very High Bond) | 0000000 | 0000 | |
| 1" | 12 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 1" | 18 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 1 1/2" | 23 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 2" | 35 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 2" | 24 lbs./ft. | 140° | 3M VHB (Very High Bond) | 0000000 | 0000 | |
| 2" | 24 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 3" | 50 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 3" | 45 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 4" | 70 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 4" | 50 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 24 3/8" | 180 lbs./sq. ft. | 150° | Rubber | 0000000 | 00000 | |
1/8" Thick. | ||||||
| 1/4" | 4 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 1/4" | 3 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 3/8" | 4 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 3/8" | 6 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 1/2" | 12 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 1/2" | 8 lbs./ft. | 150° | Rubber | 0000000 | 000 | |
| 3/4" | 12 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 3/4" | 18 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 1" | 16 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 1" | 24 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 1 1/2" | 31 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 1 1/2" | 24 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 2" | 32 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 2" | 40 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 3" | 70 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 3" | 45 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 4" | 55 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 4" | 80 lbs./ft. | 150° | Acrylic | 0000000 | 00000 | |
3/16" Thick. | ||||||
| 61/64" | 25 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 61/64" | 15 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 1 1/2" | 35 lbs./ft. | 150° | Acrylic | 0000000 | 00000 | |
| 1 1/2" | 24 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
1/4" Thick. | ||||||
| 5/8" | 9 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
| 5/8" | 14 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 2" | 50 lbs./ft. | 150° | Acrylic | 0000000 | 00000 | |
| 2" | 31 lbs./ft. | 150° | Rubber | 0000000 | 0000 | |
Holding Power on Two Faces | ||||||
1/32" Thick. | ||||||
| 1" | 6 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 1" | 8 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 2" | 13 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 2" | 16 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
1/16" Thick. | ||||||
| 1" | 13 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 1" | 16 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 2" | 26 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 2" | 32 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 3" | 27 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
| 3" | 45 lbs./ft. | 150° | Acrylic | 0000000 | 0000 | |
3/16" Thick. | ||||||
| 3" | 65 lbs./ft. | 150° | Acrylic | 0000000 | 00000 | |
| 3" | 40 lbs./ft. | 150° | Acrylic | 0000000 | 00000 | |
High-Temperature Flexible Magnets
Unlike other flexible magnets, these resist demagnetizing at temperatures up to 250° F. They're made of corrosion-resistant ceramic and bonded with rubber for flexibility. Use scissors to cut them into custom shapes and sizes.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
| Wd. | Lg. | Max. Pull, lbs. | Max. Temperature, °F | Color | Adhesive Type | Each | |
1/16" Thick. | |||||||
|---|---|---|---|---|---|---|---|
| 9" | 12" | 160 | 250° | Dark Brown | Acrylic | 0000000 | 000000 |
| 9" | 24" | 320 | 250° | Dark Brown | Acrylic | 0000000 | 00000 |
1/8" Thick. | |||||||
| 9" | 12" | 160 | 250° | Dark Brown | Acrylic | 0000000 | 00000 |
| 9" | 24" | 320 | 250° | Dark Brown | Acrylic | 0000000 | 00000 |
3/16" Thick. | |||||||
| 9" | 12" | Not Rated | 250° | Dark Brown | Acrylic | 0000000 | 00000 |
| 9" | 24" | Not Rated | 250° | Dark Brown | Acrylic | 0000000 | 00000 |
1/4" Thick. | |||||||
| 9" | 12" | Not Rated | 250° | Dark Brown | Acrylic | 0000000 | 00000 |
| 9" | 24" | Not Rated | 250° | Dark Brown | Acrylic | 0000000 | 00000 |
Conformable Magnets for Irregular Surfaces
Stretch these magnetic strips over corners and irregular surfaces, or cut them with scissors into custom shapes and sizes. They're made of neodymium for stronger holding power than other flexible magnets.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
| Wd. | Lg. | Max. Pull, lbs./ft. | Max. Temperature, °F | Material | Adhesive Type | Each | |
Holding Power on One Face | |||||||
|---|---|---|---|---|---|---|---|
1/32" Thick. | |||||||
| 1/2" | 6" | 24 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 12" | 24 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 0000 |
| 1/2" | 24" | 24 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 6 ft. | 24 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 6" | 48 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 0000 |
| 1" | 12" | 48 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 24" | 48 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 6 ft. | 48 | 170° | Neodymium (Rare Earth) | Acrylic | 0000000 | 00000 |
| 2" | 6" | 96 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 2" | 12" | 96 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 2" | 24" | 96 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 2" | 6 ft. | 96 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 000000 |
| 3" | 6" | 144 | 170° | Neodymium (Rare Earth) | Acrylic | 0000000 | 00000 |
| 3" | 12" | 144 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 3" | 24" | 144 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 3" | 6 ft. | 144 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 000000 |
1/16" Thick. | |||||||
| 1/2" | 6" | 42 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 0000 |
| 1/2" | 12" | 42 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 24" | 42 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 6 ft. | 42 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 6" | 84 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 12" | 84 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 24" | 84 | 170° | Neodymium (Rare Earth) | Acrylic | 0000000 | 00000 |
| 1" | 6 ft. | 84 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 000000 |
| 2" | 6" | 168 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 2" | 12" | 168 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 2" | 24" | 168 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 000000 |
| 2" | 6 ft. | 168 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 000000 |
Holding Power on Two Faces | |||||||
1/32" Thick. | |||||||
| 1/2" | 6" | 1.2 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 0000 |
| 1/2" | 12" | 1.2 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 0000 |
| 1/2" | 24" | 1.2 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 6 ft. | 1.2 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 6" | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 0000 |
| 1" | 12" | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 24" | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 0000000 | 00000 |
| 1" | 6 ft. | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
1/16" Thick. | |||||||
| 1/2" | 6" | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 0000 |
| 1/2" | 12" | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 24" | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 6 ft. | 2.4 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 6" | 4.8 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 12" | 4.8 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 24" | 4.8 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 6 ft. | 4.8 | 170° | Neodymium (Rare Earth) | Acrylic | 0000000 | 000000 |
1/8" Thick. | |||||||
| 1/2" | 6" | 6 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 12" | 6 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1/2" | 24" | 6 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 6" | 12 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 12" | 12 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 00000 |
| 1" | 24" | 12 | 170° | Neodymium (Rare Earth) | Acrylic | 00000000 | 000000 |
Neodymium Magnets
Made of neodymium, these rare earth magnets are the strongest for their size. The nickel-plated finish resists corrosion.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | |||||||
|---|---|---|---|---|---|---|---|
| OD | Max. Pull, lbs. | Max. Temperature, °F | Grade | Adhesive Type | 1-49 | 50-Up | |
Adhesive on North Pole | |||||||
Magnetized Through Thickness | |||||||
0.06" Thick. | |||||||
| 3/16" | 0.9 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 |
| 3/8" | 2 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
| 1/2" | 2 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
| 3/4" | 3 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
0.08" Thick. | |||||||
| 1" | 6 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
0.1" Thick. | |||||||
| 1/4" | 1.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 3/8" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
0.118" Thick. | |||||||
| 0.315" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.472" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.709" | 6 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
1/8" Thick. | |||||||
| 1/2" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
3/16" Thick. | |||||||
| 3/4" | 10 | 170° | N35 | Acrylic | 0000000 | 00000 | 0000 |
1/4" Thick. | |||||||
| 1/2" | 9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
Adhesive on South Pole | |||||||
Magnetized Through Thickness | |||||||
0.06" Thick. | |||||||
| 3/16" | 0.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 3/8" | 2 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
| 1/2" | 2 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
| 3/4" | 3 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
0.08" Thick. | |||||||
| 1" | 6 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
0.1" Thick. | |||||||
| 1/4" | 1.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 3/8" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
0.118" Thick. | |||||||
| 0.315" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.472" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.709" | 6 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
1/8" Thick. | |||||||
| 1/2" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
3/16" Thick. | |||||||
| 3/4" | 10 | 170° | N35 | Acrylic | 0000000 | 00000 | 0000 |
1/4" Thick. | |||||||
| 1/2" | 9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Max. Pull, lbs. | Max. Temperature, °F | Grade | Adhesive Type | 1-49 | 50-Up | |
Adhesive on North Pole | ||||||||
Magnetized Through Thickness | ||||||||
0.055" Thick. | ||||||||
| 1/2" | 1" | 3 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 00000 | 00000 |
0.074" Thick. | ||||||||
| 0.153" | 15/32" | 1.7 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
0.1" Thick. | ||||||||
| 0.13" | 1/4" | 1.6 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 1/4" | 1/4" | 2.2 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 1/2" | 1/2" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
3/16" Thick. | ||||||||
| 3/16" | 3/8" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 3/4" | 3/4" | 12 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 |
Adhesive on South Pole | ||||||||
Magnetized Through Thickness | ||||||||
0.055" Thick. | ||||||||
| 1/2" | 1" | 3 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
0.074" Thick. | ||||||||
| 0.153" | 15/32" | 1.7 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
0.1" Thick. | ||||||||
| 0.13" | 1/4" | 1.6 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 1/4" | 1/4" | 2.2 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 1/2" | 1/2" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
3/16" Thick. | ||||||||
| 3/16" | 3/8" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 3/4" | 3/4" | 12 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 |
Multi-Pole Neodymium Magnets
Many small poles give these nickel-plated magnets shallower, more concentrated magnetic fields that hold especially well on thin material. To prevent accidental attachment, they won't attract until they're close to the material. Also known as Polymagnets®.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Grade | Adhesive Type | 1-49 | 50-Up | |
Magnetized Through Thickness | ||||||||
1/16" Thick. | ||||||||
| 1" | 17 | 13 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 00000 | 00000 |
1/8" Thick. | ||||||||
| 1" | 37 | 13 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
| 1 1/2" | 77 | 37 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 00000 | 00000 |
3/16" Thick. | ||||||||
| 1" | 38 | 13 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 00000 | 0000 |
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Grade | Adhesive Type | 1-49 | 50-Up | |
Magnetized Through Thickness | |||||||||
1/8" Thick. | |||||||||
| 1/2" | 1/2" | 13 | 5 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 00000 | 00000 |
| 1/2" | 1" | 17 | 11 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 0000 | 0000 |
| 1" | 1" | 40 | 25 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 00000 | 0000 |
| 1" | 1 1/2" | 86 | 45 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 00000 | 00000 |
3/16" Thick. | |||||||||
| 1 1/2" | 1 1/2" | 65 | 35 | 180° | N42 | 3M VHB (Very High Bond) | 0000000 | 00000 | 00000 |
Multi-Pole Neodymium Magnets with Unthreaded Hole
Many small poles give these nickel-plated magnets shallower, more concentrated magnetic fields that hold especially well on thin material. To prevent accidental attachment, they won't attract until they're close to the material. Slide onto a rod or use a bolt or screw to install. Also known as Polymagnets®.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Magnet-Receptive Sheets
These sheets are made of rubber and iron oxide, letting you create a nonmetallic, nonmagnetic surface that magnets will stick to. Sheets can be cut with scissors to create custom shapes and sizes.
| Thick. | Wd. | Thick. Tolerance | Wd. Tolerance | Temp. Range, °F | Material | Bonded With | Color | For Use On | Max. Continuous Lg., ft. | Per Ft. | |
Adhesive-Back Sheets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.03" | 24 3/8" | -0.002" to 0.002" | -0.03" to 0.03" | 0° to 160° | Iron Oxide | Rubber | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | 50 | 0000000 | 00000 |